Biomedical subjects

Klaus Becker

Publications and source records attributed to Klaus Becker.

At least 19 recordsLinked to original sources

PubMed2006

Protective effect of the in situ pellicle on dentin erosion - an ex vivo pilot study.

AIM: The acquired pellicle is well known as an anti-erosive proteinaceous layer on enamel, but its protective properties on dentin have not been investigated in detail until now. The aim of the present ex vivo study was to evaluate the erosive effects on pellicle coated dentin. METHODS: Bovine dentin slabs were exposed to the oral cavity of one subject for 120 min for in situ pellicle formation. Subsequently, the slabs were incubated with HCl (pH 2.3) in vitro for 5 min and erosive calcium-release was measured photometrically. In addition, the acid treated specimens were evaluated by transmission electron microscopy (TEM). Pellicle free samples served as controls. RESULTS: Calcium erosion from the pellicle coated dentin slabs amounted to 23.5+/-2.9 microg Ca/min (pellicle free samples: 32.2+/-4.2 microg Ca/min). The difference was statistically significant (p < or = 0.05). In pellicle coated as well as in uncoated dentin samples, TEM-evaluation showed a demineralised dentinal surface layer which thickness ranged between 3 and 6 microm. The pellicle itself was partially dissolved but not removed by hydrochloric acid treatment. CONCLUSION: The protective properties of the acquired pellicle against an erosive challenge of the dentinal surface are limited. The dentinal pellicle functions like an ion permeable network rather than a barrier.

Adult↗

PubMed2006

Nitrous oxide (N2O) pre- and postsynaptically attenuates NMDA receptor-mediated neurotransmission in the amygdala.

The gaseous anaesthetic N(2)O displays analgesic, anxiolytic, and amnesic properties and has addictive psychedelic effects. N(2)O can further act as a neuroprotective agent, but may also become neurotoxic under certain conditions. Here, we employed whole-cell patch-clamp techniques in acute brain slices, and electrical afferent and infrared-guided laser stimulation to examine how N(2)O (65%) can affect NMDA receptor (NMDAR)-mediated synaptic transmission to principal neurons (PNs) of the adult murine basolateral amygdala (BLA). The BLA plays a critical role in anaesthetic-induced amnesia, the formation of aversive memories, as well as in fear and addictive behaviour. We evoked NMDAR-mediated excitatory postsynaptic currents (NMDAR-EPSCs) in PNs of the BLA (BLA-PNs). We found these currents to be markedly decreased by N(2)O via pre- and postsynaptic actions: Without changing their kinetics and open probability, N(2)O impeded the voltage-dependent channel opening of NMDARs in BLA-PNs and diminished their unitary conductance as estimated by non-stationary fluctuation analysis. In addition, our data speak in favour of a N(2)O-produced reduction in the probability of glutamate release at the synapses generating the NMDAR-EPSCs. It is conceivable that these effects not only contribute to anaesthesia and anxiolysis, but also have bearings on learning and memory as well as excitotoxicity in the amygdala.

Amygdala↗

PubMed2006

Electrical control of Förster energy transfer.

Bringing together compounds of intrinsically different functionality, such as inorganic nanostructures and organic molecules, constitutes a particularly powerful route to creating novel functional devices with synergetic properties found in neither of the constituents. We introduce nanophotonic functional elements combining two classes of materials, semiconductor nanocrystals and dyes, whose physical nature arises as a superposition of the properties of the individual components. The strongly absorbing rod-like nanocrystals focus the incident radiation by photopumping the weakly absorbing dye via energy transfer. The CdSe/CdS nanorods exhibit a large quantum-confined Stark effect on the single-particle level, which enables direct control of the spectral resonance between donor and acceptor required for nanoscopic Förster-type energy transfer in single nanorod-dye couples. With this far-field manipulation of a near-field phenomenon, the emission from single dye molecules can be controlled electrically. We propose that this effect could lead to the design of single-molecule optoelectronic switches providing building blocks for more complex nanophotonic circuitry.

Journal Article↗

PubMed2006

Influence of different restorative materials on lysozyme and amylase activity of the salivary pellicle in situ.

Lysozyme and amylase are the most abundant enzymatic components in the salivary pellicle. The purpose of the present study was to determine the influence of different substrata on amylase and lysozyme activity in salivary pellicles formed in situ. Slabs (5 mm diameter) of bovine dentine and enamel, of titanium, gold alloy, resin composite, PMMA, amalgam, and feldspar ceramic were fixed on the buccal sites of individual splints worn by six subjects for 30 min to allow pellicle formation. Thereafter, slabs were removed from the trays and rinsed with running water. Lysozyme activity was determined via lysis of Micrococcus lysodeicticus. Amylase activity was measured with a photometric method using 2-chloro-4-nitrophenyl-4-O-beta-D-galactopyranosylmaltotriosid (GalG2CNP) as substrate. Both pellicle enzymes were evaluated in the immobilized as well as in the desorbed state. Salivary enzyme activities were also measured. All investigated pellicles exhibited lysozyme and amylase activity. Great intraindividual and interindividual differences were observed. Over all samples, immobilized amylase activity amounted to 0.65 +/- 0.64 mU/cm2. Immobilized lysozyme activity was 5.04 +/- 1.55 U/cm2. There were no major effects of the substratum on pellicle-bound amylase and lysozyme activity. Immobilized and desorbed enzyme activities revealed a strong correlation (lysozyme: r = 0.700; amylase: r = 0.990). Salivary enzyme activities had only little impact on pellicle-bound enzyme activities. Amylase and lysozyme are incorporated in the acquired in situ pellicle on different solid surfaces in an active conformation. Dental material and enzyme activity in the saliva have only little impact on enzymatic activity in the pellicle in situ.

Adult↗

PubMed2006

Aggressive behaviour and energy metabolism in a cichlid fish, Oreochromis mossambicus.

We have investigated the effect of mirror-elicited agonistic behaviour on oxygen consumption in the Mozambique tilapia, Oreochromis mossambicus (Cichlidae). Males exposed to their mirror image showed higher frequencies of both lateral display and tail-beating and escalated aggression more frequently than males exposed to a transparent glass that was used as a control for the presence of a novel object in the tank. This aggressive response was correlated with an increase in oxygen consumption. Overt aggression was highly correlated with display behaviour and with locomotor activity. Bivariate analyses showed high correlation (explaining about 64% of variation) between overt aggression, locomotor activity and metabolic rates. Weakly positive bivariate correlations between displays and metabolic rates turned spurious after partialling out aggression. The data suggest that energetic costs only emerge late during the conflict, when animals escalate their aggressive behaviour.

Aggression↗

PubMed2006

Efficient light harvesting in dye-endcapped conjugated polymers probed by single molecule spectroscopy.

The development of sophisticated microscopic models of energy transfer in linear multichromophoric systems such as conjugated polymers is rarely matched by suitable experimental studies on the microscopic level. To assess the roles of structural, temporal, and energetic disorder in energy transfer, single molecule spectroscopic investigations of the elementary processes leading to energetic relaxation in conjugated polymers are desirable. We present a detailed study of energy transfer processes occurring in dye-endcapped conjugated polymer molecules on the single molecule level. These processes are mostly masked in ensemble investigations. Highly efficient intramolecular energy transfer along a single polyindenofluorene chain to a perylene endcap occurs in many instances and is resolved in real time. We further consider the spectral emission characteristics of the single molecule, the polarization anisotropy which reveals the chain conformation, the fluorescence intermittency, and the temperature dependence and conclude that the efficiency of energy transfer in the ensemble is controlled by the statistics of the individual molecules. The weak thermal activation of energy transfer indicates the involvement of vibrational modes in interchromophoric coupling. Whereas backbone-endcap coupling is strong, the rate-limiting step for intramolecular energy transfer is the migration along the backbone. The results are particularly relevant to understanding undesired exciton trapping on fluorenone defects in polyfluorenes.

Journal Article↗

PubMed2006

Effect of bleaching on subsurface micro-hardness of composite and a polyacid modified composite.

OBJECTIVE: To investigate the influence of different bleaching techniques on subsurface physical properties of composite and polyacid modified composite tested via determination of micro-hardness. METHODS: Specimens of Tetric Flow, Tetric EvoCeram and Compoglass were light cured (2.5mm thickness) and stored in artificial saliva for 2 weeks (n=12/group). The samples were only removed for application of the following bleaching agents in a humid atmosphere: Either Vivastyle (1h/d), Whitestrips (30min/d), sodium-perborate-water mixture (once for 72h), Simply White (1h/d), or Opalescence XtraBoost (1st and 5th day for 15min) were applied on the surfaces of the samples. Untreated specimens served as negative controls, samples treated with ethyl alcohol for 1h acted as positive controls. After the bleaching period, samples were cross-sectioned and the micro-hardness (Knoop) of different subsurface levels (0.1mm-2.0mm) was determined. RESULTS: All bleaching techniques significantly reduced the Knoop-hardness of the restoratives compared to untreated controls. Thereby, bleaching significantly affected not only superficial but also the deep layers of the specimens: in superficial layers (0.1mm, 0.2mm) lowest micro-hardness values amounted to 69.5% and 76.3% of the respective untreated controls (Compoglass/Vivastyle). In deeper subsurface levels, the lowest hardness was observed with Opalescence/Tetric EvoCeram (0.3mm: 78.3%; 0.4mm: 80%; 0.5mm: 80.5%; 1.0mm: 84.2%; 2.0mm: 84.4%). SIGNIFICANCE: Bleaching with the tested bleaching agents softens the adhesive restorative materials examined. Due to the fact that subsurface layers are also affected, polishing of the surface may not suffice for re-establishing the physical properties of the surface of the fillings.

Borates↗

PubMed2006

Influence of carbamide peroxide on enamel fluoride uptake.

OBJECTIVE: Aim of the study was to evaluate the influence of carbamide peroxide (CP) on enamel fluoride uptake by comparing enamel fluoride uptake from a 1% amine fluoride (AmF) gel with the fluoride acquisition from a 10% carbamide peroxide agent supplemented with 1% AmF. MATERIALS AND METHODS: Three enamel cylinders (4mm in diameter) were prepared from the buccal surfaces of 60 bovine incisors. One sample of each tooth was used for determination of baseline fluoride content of the respective tooth. The two remaining samples were allocated to the experimental series 1 or 2, respectively. Each series consisted of five experimental groups (A-E, n=12) and differed with respect to the length of the treatment period with the gels (A-D). The experimentally designed gels (pH 5.5) used in the study were as follows: A (10% CP), B (10% CP, 1% F(-) as AmF), C (1% F(-) as AmF), D (no CP, no F(-)) and were formulated on the same basis. The enamel samples were covered for 4h with the respective gel at 37 degrees C and were then transferred to artificial saliva for 20 h (series 1). The samples of group E served as controls and were not treated with a gel. In series 2, treatment with the gels and storage in saliva was conducted seven times. Finally, the samples were assessed for KOH-soluble and structurally bound fluoride. RESULTS: Only the enamel samples treated with the fluoridated bleaching gel (group B) and with the amine fluoride gel (group C) exhibited significant fluoride acquisition. Thereby, both gels showed significantly lower uptake in series 1 as compared to series 2. Both KOH-soluble and structurally bound fluoride acquisition was significantly higher in group C than in group B. CONCLUSION: Treatment with a carbamide peroxide gel supplemented with amine fluoride causes less fluoride acquisition in enamel than a pure amine fluoride gel. Under the conditions of the study, it is assumed that carbamide peroxide seems to influence enamel fluoride uptake.

Amines↗

PubMed2006

Efficient intramolecular energy transfer in single endcapped conjugated polymer molecules in the absence of appreciable spectral overlap.

Intramolecular energy transfer is investigated in an endcapped conjugated polymer on the single molecule level at low temperature. While light harvesting in one dimension is on average inefficient in the ensemble, the efficiency scatters widely on the single molecule level, with some molecules exhibiting near-unity transfer probability from the polymer backbone donor to the acceptor endcap. This transfer occurs in the absence of spectral overlap between donor and acceptor, as the electronic and vibronic transitions narrow substantially at low temperatures once inhomogeneous disorder broadening is overcome. The results illustrate how far-field absorption and emission characteristics of molecular transitions are insufficient to describe resonant energy transfer processes following Förster theory in multichromophoric aggregates. Rather, exciton trapping due to efficient multiphonon emission has to be invoked with a possible contribution of strong polaronic coupling.

Journal Article↗

PubMed2006

[In vitro cytotoxicity of different self-etching dental adhesive systems].

The study evaluated the cytotoxicity of five self-etching dentin adhesive systems applied on dentin specimens of different thicknesses. The test materials (A: Adper Prompt-L-Pop, B: Xeno II, C: Clearfil SE Bond, D: One up Bond F, E: Resulcin Aqua Prime & Monobond) and a positive control (35% H202) were applied on 1.0, 1.5 and 2.5 mm thick bovine dentin specimens (each subgroup n = 5) in a dentin barrier test device. The experiments were performed with perfusion (2 ml/h) of the pulpal part of the chamber. The eluates were obtained before (baseline) and 15, 30, 45, 60 and 120 min after application of the adhesives and pipetted onto L-929 fibroblasts. Cytotoxicity of the materials was determined in relation to the baseline value using the MTT assay and statistical analysis was performed by ANOVA. After 15 min perfusion, test materials B-E applied on 1.0 mm and B and E applied on 1.5 mm dentin specimens exhibited cytotoxic potential. However, after 30 min perfusion none of the adhesives showed any toxicity. Cytotoxicity decreased with increasing thickness of the dentin slices and was lower for Adper Prompt-L-Pop compared to adhesives B-E. Self-etching adhesive systems might exhibit cytotoxic potential when applied on dentin of less than 1.5 mm thickness. However, cytotoxicity of the materials decreased with increasing dentin thickness and increasing duration of perfusion.

Acid Etching, Dental↗

PubMed2005

The impact of saponins or saponin-containing plant materials on ruminant production--a review.

Saponins are steroid or triterpene glycoside compounds found in a variety of plants. Some saponin-containing plants, mainly legumes, have been used as animal feed, but others are toxic. Several studies on the effect of saponins on ruminant production have also been reported. Some in vitro and in vivo experiments that demonstrate the beneficial effects of saponin such as defaunation of the rumen and manipulation of the end products of fermentation are described. Defaunation is the selective removal of protozoa from the rumen microbial ecosystem by a cell membrane cholesterol-saponin interaction, which causes cell rupture. Because protozoa in the rumen cause protein turnover by predating on bacteria, defaunation increases the nitrogen utilization of the ruminant and may lead to an increase in growth, milk, or wool production. The growth-promoting effect was evident in the high roughage diet suggesting that the application of saponins or saponin-containing plant materials may be beneficial for the subsistence farmers in developing countries. Saponins are deglycosylated by rumen microbes. Some sapogenins have been detected in the digestive tract of ruminants; however, the direct action of these compounds on the host animal is still unclear. No information on the effects of saponin on ruminant reproduction is available. There is an urgent need for a systematic evaluation of the most active structural components of the saponins, and their interaction with the microbial community, the host animal, and the diet. Along with these studies, the direct effects of saponins or their microbial degradation products on the host must be examined in order to get the full understanding of the metabolism and beneficial effects of saponins on animals.

Animals↗

PubMed2005

WIN 55,212-2 decreases the spatial spread of neocortical excitation in vitro.

The 'intrinsic optical signal' was used to monitor neuronal network excitability. The cannabinoid receptor type 1 agonist WIN 55,212-2 reduced the intensity and the spatial spread of the intrinsic optical signal and prolonged its kinetics in the rat neocortex in vitro. These effects were antagonized by the cannabinoid receptor antagonist SR141716A. Thus, our results suggest that neocortical network activity is modulated via the activation of cannabinoid receptors. The decrease of neocortical network excitability in the present study is probably due to a decreased excitability of glutamatergic neurons.

Animals↗

PubMed2005

Wave chaos in real-world vertical-cavity surface-emitting lasers.

We report the onset of wave chaos in a real-world vertical-cavity surface-emitting laser. In a joint experimental and modeling approach we demonstrate that a small deformation in one layer of the complicated laser structure changes the emission properties qualitatively. Based on the analysis of the spatial emission profiles and spectral eigenvalue spacing distributions, we attribute these changes to the transition from regular behavior to wave chaos, and justify the full analogy to two-dimensional billiards by model calculations. Hence, these lasers represent fascinating devices for wave chaos studies.

Journal Article↗

PubMed2005

Dual species emission from single polyfluorene molecules: signatures of stress-induced planarization of single polymer chains.

Single chains of the conjugated polymer polyfluorene are shown to exist in two distinct conformational arrangements. Planarization of the chain to the single molecule beta-phase leads to a red shift in the emission and a strong modification of the vibronic progression. Most importantly, this structural rearrangement dramatically affects the photophysical stability on the single molecule level. Single molecule beta-phase emission displays a vastly improved lifetime and much less noise on both the emission intensity and the spectral position. In the absence of signatures of multichromophoric emission on the single molecule level, we propose that the effective conjugation length accounts for most of the physical chain length of the beta-phase.

Journal Article↗

PubMed2005

Lysozyme activity in the initially formed in situ pellicle.

UNLABELLED: Lysozyme is one of the most abundant enzymatic components in the salivary pellicle. The purpose of the present in situ study was to determine if and to which extent lysozyme immobilised in pellicles exposes enzymatic activity. Influence of different oral sites and pellicle formation time on enzyme activity was also evaluated. Bovine enamel slabs (5mm diameter) were fixed on buccal and oral sites of individual trays worn by six subjects for 3 and 30 min on different days. After pellicle formation, slabs were removed from the trays and rinsed with running water. Afterwards, pellicle-bound lysozyme activity was determined via lysis of Micrococcus lysodeicticus photometrically in two steps. In a first step, lysozyme was desorbed in phosphate buffer and dissolved activity was measured. In a second step, slabs were incubated in phosphate buffer with the substrate and remaining immobilised activity was determined. All investigated pellicles exhibited lysozyme activity. Great intra- and inter-individual differences were observed. Mean desorbed activity of 3 min-pellicles amounted to 26.06+/-17.81 U/cm(2) (30 min; 26.79+/-17.48). The remaining immobilised activity was 13.54+/-11.42 for 3 min-pellicles and 16.08+/-12.81 for 30 min-pellicles. Pellicle derived lysozyme showed a Michaelis type kinetic. CONCLUSION: In situ pellicle exposes lysozyme activity even after a 3 min formation period. Exposed enzyme activity is neither influenced by pellicle formation time nor by the site of pellicle formation. It shows great inter- and intra-individual differences.

Adsorption↗

PubMed2005

Erosive effects of different acids on bovine enamel: release of calcium and phosphate in vitro.

The present study intended to investigate minimal erosive effects of different acids on enamel during short time incubation via determination of calcium and phosphate dissolution. Bovine enamel specimens were eroded for 1-5 min with eight different acids of pH 2, 2.3 and 3 (citric (CA), maleic (MA), lactic (LA), tartaric (TA), phosphoric (PA), oxalic (OA), acetic (AA) and hydrochloric acid (HCl)). Calcium (Ca) and phosphate (P) release were determined photometrically using arsenazo III (calcium) and malachite green (phosphate) as substrates. Each subgroup contained eight enamel specimens. Amount of titratable acid was determined for all acidic solutions. MA, LA, TA, AA and HCl caused linear release of Ca and P, PA of Ca, CA of P. For CA, MA, LA, TA, AA, PA and HCl mineral loss was shown to be pH-dependent. Ca dissolution varied between 28.6+/-4.4 (LA, pH 2) and 2.4+/-0.7 nmol mm(-2)min(-1) (HCl, pH 3), P dissolution ranged between 17.2+/-2.6 (LA, pH 2) and 1.4+/-0.4 nmol mm(-2)min(-1) (HCl, pH 3). LA was one of the most erosive acids. AA was very erosive at pH 3. HCl and MA were shown to have the lowest erosive effects. There was only a weak correlation (r=0.28) between P and Ca release and the amount of titratable acid. The method of the present study allows investigation of minimal erosive effects via direct determination of P and Ca dissolution. During short time exposition at constant pH level, erosive effects mainly depend on pH and type of acid but not on amount of titratable acid.

Acetic Acid↗

PubMed2005

Exposure of tilapia pituitary cells to saponins: insight into their mechanism of action.

Cell permeation and durable effects of triterpenoidal saponin preparations from soybean (SbS), Quillaja saponaria Molina (QsS) and Gypsophila paniculata (GypS), were studied. A concentration-dependent change in hemolysis rates was observed when cells were incubated with QsS or GypS, but not with SbS. Dose dependence was also observed for the leakage of lactate dehydrogenase (LDH; MW 142,000) and of Luteinizing Hormone (LH; MW 35,000) from tilapia pituitary dispersed cells. Exposure of pituitary fragments to a combination of GnRH and GypS or QsS, resulted in a significantly high release of LH. GypS were shown to be more potent in inducing hemolysis of human RBC's and LH release from tilapia pituitary fragments. Interestingly, tilapia pituitary fragments treated with QsS were able to secrete LH in a characteristic manner, in response to a second Gonadotropin Releasing Hormone (GnRH) pulse, while fragments exposed to GypS did not respond to the second hormone pulse. The rapid recovery of pituitary fragments after the removal of QsS, may suggest a rearrangement of membranes rather than pore formation as the mechanism of action of QsS. Understanding the structural features underlying the reversible rearrangement of membranes and the lack of hemolysing activity by specific saponins may lead to the development of novel bioactive drugs.

Animals↗

PubMed2005

Fracture resistance of endodontically treated maxillary premolars restored with CAD/CAM ceramic inlays.

STATEMENT OF PROBLEM: Endodontically treated posterior teeth are more likely to fracture compared to posterior teeth with vital pulps. Reinforcement with an extracoronal restoration that covers the cusps is the most commonly recommended method for reducing the risk of fracture. It is not known whether bonded intracoronal restorations without cuspal coverage will reduce the risk of fracture. PURPOSE: The aim of this in vitro study was to investigate whether reinforcement of endodontically treated premolars with MOD preparations could be achieved by insertion of bonded CAD/CAM ceramic inlays. MATERIAL AND METHODS: Forty-five extracted maxillary premolars were equally distributed among 3 groups (END, CER, CTR). In group END (n=15), root canals were enlarged with a rotary NiTi system and obturated with heat-softened gutta-percha around a plastic carrier (Thermafil). After filling of the endodontic access cavities with autopolymerizing composite resin (Luxacore), standardized MOD cavity preparations were made and CAD/CAM ceramic inlays (CEREC) were fabricated and then bonded to the teeth with composite resin (Tetric) and an adhesive system (Syntac Classic). In group CER (n=15), teeth without endodontic treatment were restored with bonded inlays (CEREC). Sound premolars served as controls (group CTR, n=15). Teeth were then thermal cycled (1445 cycles, dwell time: 30 seconds, 5 degrees /55 degrees C). An eccentric load was applied on the buccal incline of the palatal cusp in a universal testing machine until cusp fracture (N). Fracture load was evaluated with the Mann-Whitney test, and type of fracture, with a chi-square analysis (alpha=.05). The type of fracture was determined by visual inspection: type I - supragingival fracture within the palatal cusp; type II - fracture below cemento-enamel junction of palatal cusp; and type III - fracture of palatal cusp and central portion of the tooth exposing the root canal cavity. RESULTS: No significant difference was found among the 3 groups with respect to load required for fracture. Mean fracture load +/- SD was recorded as follows: 291.6 +/- 113.7 N for group END, 363.2 +/- 140.3 N for group CER, and 296.5 +/- 170.5 N for group CTR. Regarding fracture modes, significantly more teeth from group END exhibited fractures of type III and II compared with control specimens. CONCLUSION: Teeth restored with bonded CAD/CAM ceramic inlays (CEREC) fractured with a significantly higher number of severe fractures compared to the control group.

Bicuspid↗