PubMed Health⌕ Search

Biomedical subjects

Klaus Kern

Publications and source records attributed to Klaus Kern.

At least 19 recordsLinked to original sources
PubMed2007

High-performance carbon nanotube field effect transistors with a thin gate dielectric based on a self-assembled monolayer.

Individual single-walled carbon nanotube (SWCNT) field effect transistors (FETs) with a 2 nm thick silane-based organic self-assembled monolayer (SAM) gate dielectric have been manufactured. The FETs exhibit a unique combination of excellent device performance parameters. In particular, they operate with a gate-source voltage of only -1 V and exhibit good saturation, large transconductance, and small hysteresis (<or=100 mV), as well as a very low subthreshold swing (60 mV/dec) under ambient conditions. The SAM-based gate dielectric opens the possibility of fabricating transistors operating at low voltages and constitutes a major step toward nanotube-based flexible electronics.

Electricity↗
PubMed2006

2D supramolecular assemblies of benzene-1,3,5-triyl-tribenzoic acid: temperature-induced phase transformations and hierarchical organization with macrocyclic molecules.

Two-dimensional supramolecular honeycomb networks with cavities of an internal diameter of 2.95 nm were formed by the self-assembly of 4,4',4' '-benzene-1,3,5-triyl-tribenzoic acid (BTA) on a Ag(111) surface at room temperature. Annealing to higher temperatures resulted in two sequential phase transformations into closer-packed supramolecular arrangements. The phase transformations are associated with stepwise deprotonation of the carboxylic acid groups. The voids of the honeycomb network of BTA have a suitable size for the construction of hierarchical structures with guest molecules. Single molecules of the macrocyclic compound mt-33 were successfully confined inside 2D nanocavities of the honeycomb networks and released when the phase was transformed to the close-packed structure.

Journal Article↗
PubMed2006

Surface-template assembly of two-dimensional metal-organic coordination networks.

The self-assembly of iron-coordinated two-dimensional metal-organic networks on a Cu(100) surface has been investigated by scanning tunneling microscopy under ultra-high-vacuum conditions. We applied three rodlike polybenzene dicarboxylic acid molecules with different backbone lengths as organic linkers. The three linker molecules form topologically identical rectangular networks with Fe, all comprising iron pairs as the network nodes. Whereas the length of the linker molecules defines the dimension of the networks, the substrate also significantly influences the structural details, e.g., network orientation with respect to the substrate, geometric shape of the network cavities, Fe-carboxylate coordination configuration, and iron-iron distance.

Journal Article↗
PubMed2006

Asymmetry induction by cooperative intermolecular hydrogen bonds in surface-anchored layers of achiral molecules.

The mesoscale induction of two-dimensional supramolecular chirality (formation of 2D organic domains with a single handedness) was achieved by self-assembly of 1,2,4-benzenetricarboxylic (trimellitic) acid on a Cu(100) surface at elevated temperatures. The combination of spectroscopic [X-ray photoelectron spectroscopy (XPS) and near-edge X-ray absorption fine structure (NEXAFS)], real-space-probe [scanning tunneling microscopy (STM)], and computational [density functional theory (DFT)] methods allows a comprehensive characterization of the obtained organic adlayers, where details of molecular adsorption geometry, intermolecular coupling, and surface chemical bonding are elucidated. The trimellitic acid species, comprising three functional carboxylic groups, form distinct stable mirror-symmetric hydrogen-bonded domains. The chiral ordering is associated with conformational restriction in the domains: molecules anchor to the substrate with an ortho carboxylate group, providing two para carboxylic acid moieties for collective lateral interweaving through H bonding, which induces a specific tilt of the molecular plane. The ease of molecular symmetry switching in domain formation makes homochiral-signature propagation solely limited by the terrace width. The molecular layer modifies the morphology of the underlying copper substrate and induces mum-sized strictly homochiral terraces.

Journal Article↗
PubMed2006

Surface-assisted coordination chemistry and self-assembly.

This article discusses different approaches to build up supramolecular nanoarchitectures on surfaces, which were simultaneously investigated by scanning tunneling microscopy (STM) on the single-molecule level. Following this general road map, first, the hydrogen-bonding guided self-assembly of two different, structural-equivalent molecular building blocks, azobenzene dicarboxylic acid and stilbene dicarboxylic acid, was studied. Secondly, the coordination chemistry of the same building blocks, now acting as ligands in metal coordination reactions, towards co-sublimed Fe atoms was studied under near surface-conditions. Extended two-dimensional tetragonal network formation with unusual Fe2L(4/2)-dimers at the crossing points was observed on copper surfaces. Complementary to the first two experiments, a two-step approach based on the solution-based self-assembly of square-like tetranuclear complexes of the M4L4-type with subsequent deposition on graphite surfaces was investigated. One- and two-dimensional arrangements as well as single molecules of the M4L4-complexes could be observed. Moreover, the local electronic properties of a single M4L4-complexes could be probed with submolecular resolution by means of scanning tunnelling spectroscopy (STS).

Journal Article↗
PubMed2006

Density functional theory analysis of carboxylate-bridged diiron units in two-dimensional metal-organic grids.

Carboxylate-bridged diiron units have been realized recently in two dimensions via metal-directed self-assembly of simple organic linkers. They represent notably a coupling motif stabilizing a series of nanoporous metal-organic coordination networks and are reminiscent of catalytically active sites in metalloproteins. To rationalize their atomic structure, chemical bonding, and electronic properties, we performed density functional theory calculations for exemplary Fe-terephthalate grids assembled on the Cu(100) surface. The obtained atomistic description and understanding is decisive for the considerate use of two-dimensional metal-organic coordination networks as templates, guest systems, or catalysts.

Journal Article↗
PubMed2006

Monitoring two-dimensional coordination reactions: directed assembly of co-terephthalate nanosystems on Au(111).

We report scanning tunneling microscopy observations on the formation of 2D Co-based coordination compounds on the reconstructed Au(111) surface. Preorganized arrays of Co bilayer islands are shown to be local reaction sites, which are consumed in the formation of Co-terephthalate aggregates and regular nanoporous grids. The latter exhibit a planar geometry stabilized by the smooth substrate. The nanogrids are based on a rectangular motif, which is understood as an intrinsic feature of a 2D cobaltous terephthalate sheet and dominates over the templating influence of the quasihexagonal substrate atomic lattice. The dynamics of the Co island dissolution and metallosupramolecular self-assembly could be monitored in situ. Complementary first-principles calculations were performed to analyze the underlying driving forces and to examine general trends in 2D metal-carboxylate formation. The findings indicate the wide applicability of coordination chemistry concepts at surfaces, which moreover can be spatially confined by using templated substrates, and its potential to synthesize arrangements unavailable in bulk materials.

Journal Article↗
PubMed2006

Electrospray ion beam deposition of clusters and biomolecules.

An ion beam source using electrospray ionization is presented for nondestructive vacuum deposition of mass-selected large organic molecules and inorganic clusters. Electrospray ionization is used to create an ion beam from a solution containing the nanoparticles or molecules to be deposited. To form and guide the ion beam, radio frequency and electrostatic ion optics are utilized. The kinetic energy distribution of the particles is measured to control the beam formation and the landing process. The particle mass-to-charge ratio is analyzed by in situ time-of-flight mass spectrometry. To demonstrate the performance of the setup, deposition experiments with gold nanoclusters and bovine serum albumin proteins on graphite surfaces were performed and analyzed by ex situ atomic force microscopy. The small gold clusters are found to form three-dimensional agglomerations at the surface, preferentially decorating the step edges. In contrast, bovine serum albumin creates two-dimensional fractal nanostructures on the substrate terraces due to strong intermolecular interactions.

Biopolymers↗
PubMed2005

Enhanced field emission from multiwall carbon nanotube films by secondary growth.

We have studied nickel, gold, and ferritin coatings on catalytically grown multiwall carbon nanotubes as well as the generation of secondary nanotubes by resubmitting the decorated nanotubes to the chemical vapor deposition process. Nickel layers sputtered on nanotubes show a stronger interaction with the nanotube walls than gold coatings. At ambient temperature this results in a metal film that is more homogeneous for Ni than for Au. Surface mass transport at elevated temperatures leads to a transformation of the coating to nanoscale clusters on the nanotube surface. The resulting Au clusters are spherelike with a very small contact area with the nanotube whereas the Ni clusters are stretched along the tube axis and have a large contact area. Secondary nanotubes were established by growing nanotubes directly on the walls of primary nanotubes. Thin Ni layers or ferritin served as catalysts. We compared the field emission properties of samples with and without secondary nanotubes. The presence of secondary nanotubes enhances the field emission substantially.

Journal Article↗
PubMed2005

Engineering atomic and molecular nanostructures at surfaces.

The fabrication methods of the microelectronics industry have been refined to produce ever smaller devices, but will soon reach their fundamental limits. A promising alternative route to even smaller functional systems with nanometre dimensions is the autonomous ordering and assembly of atoms and molecules on atomically well-defined surfaces. This approach combines ease of fabrication with exquisite control over the shape, composition and mesoscale organization of the surface structures formed. Once the mechanisms controlling the self-ordering phenomena are fully understood, the self-assembly and growth processes can be steered to create a wide range of surface nanostructures from metallic, semiconducting and molecular materials.

Journal Article↗
PubMed2005

Chiral phase transition in two-dimensional supramolecular assemblies of prochiral molecules.

The self-assembly of the rodlike two-dimensional chiral molecule 4-[trans-2-(pyrid-4-yl-vinyl)] benzoic acid on the Cu(100) surface has been investigated by scanning tunneling microscopy. Upon adsorption at T>or=300 K, the molecules are deprotonated and assemble in parquet patterns when the coverage remains below a critical value. Corresponding high-resolution data reveal that the ordering implies mesoscopic chiral resolution as a result of chiroselective interactions (i.e., two domains comprise exclusively one enantiomer). When the critical coverage is exceeded, an abrupt transition to a single racemic phase is observed with a different lateral molecular coupling scheme. The shifting of the subtle balance between the weak lateral coupling, substrate bonding, and the packing requirements encountered with the increased molecular coverage is suggested to be the driving force for this homochiral-to-heterochiral phase transition.

Journal Article↗
PubMed2005

Manipulating 2D metal-organic networks via ligand control.

High-resolution scanning tunneling microscopy has revealed how ligand control can be successfully employed to eliminate isomeric phases and defects in 2D coordination networks that are self-assembled at a surface support by replacing symmetric dicarboxylato linker ligands to dissymmetric carboxylpyridyl linker ligands.

Journal Article↗