PubMed Health⌕ Search

Biomedical subjects

Korneel Rabaey

Publications and source records attributed to Korneel Rabaey.

10 recordsLinked to original sources
PubMed2006

Microbial fuel cells for sulfide removal.

Thus far, microbial fuel cells (MFCs) have been used to convert carbon-based substrates to electricity. However, sulfur compounds are ubiquitously present in organic waste and wastewater. In this study, a MFC with a hexacyanoferrate cathodic electrolyte was used to convert dissolved sulfide to elemental sulfur. Two types of MFCs were used, a square type closed to the air and a tubular type in which the cathode compartment was open to the air. The square-type MFCs demonstrated a potential-dependent conversion of sulfide to sulfur. In the tubular system, up to 514 mg sulfide L(-1) net anodic compartment (NAC) day(-1) (241 mg L(-1) day(-1) total anodic compartment, TAC) was removed. The sulfide oxidation in the anodic compartment resulted in electricity generation with power outputs up to 101 mW L(-1) NAC (47 W m(-3) TAC). Microbial fuel cells were coupled to an anaerobic upflow anaerobic sludge blanket reactor, providing total removals of up to 98% and 46% of the sulfide and acetate, respectively. The MFCs were capable of simultaneously removing sulfate via sulfide. This demonstrates that digester effluents can be polished by a MFC for both residual carbon and sulfur compounds. The recovery of electrons from sulfides implies a recovery of energy otherwise lost in the methane digester.

Anaerobiosis↗
PubMed2006

Microbial fuel cells: methodology and technology.

Microbial fuel cell (MFC) research is a rapidly evolving field that lacks established terminology and methods for the analysis of system performance. This makes it difficult for researchers to compare devices on an equivalent basis. The construction and analysis of MFCs requires knowledge of different scientific and engineering fields, ranging from microbiology and electrochemistry to materials and environmental engineering. Describing MFC systems therefore involves an understanding of these different scientific and engineering principles. In this paper, we provide a review of the different materials and methods used to construct MFCs, techniques used to analyze system performance, and recommendations on what information to include in MFC studies and the most useful ways to present results.

Bacteria↗
PubMed2006

Continuous electricity generation at high voltages and currents using stacked microbial fuel cells.

Connecting several microbial fuel cell (MFC) units in series or parallel can increase voltage and current; the effect on the microbial electricity generation was as yet unknown. Six individual continuous MFC units in a stacked configuration produced a maximum hourly averaged power output of 258 W m(-3) using a hexacyanoferrate cathode. The connection of the 6 MFC units in series and parallel enabled an increase of the voltages (2.02 V at 228 W m(-3)) and the currents (255 mA at 248 W m(-3)), while retaining high power outputs. During the connection in series, the individual MFC voltages diverged due to microbial limitations at increasing currents. With time, the initial microbial community decreased in diversity and Gram-positive species became dominant. The shift of the microbial community accompanied a tripling of the short time power output of the individual MFCs from 73 W m(-3) to 275 W m(-3), a decrease of the mass transfer limitations and a lowering of the MFC internal resistance from 6.5 +/- 1.0 to 3.9 +/- 0.5 omega. This study demonstrates a clear relation between the electrochemical performance and the microbial composition of MFCs and further substantiates the potential to generate useful energy by means of MFCs.

Bacteria↗
PubMed2005

Tubular microbial fuel cells for efficient electricity generation.

A tubular, single-chambered, continuous microbial fuel cell (MFC) that generates high power outputs using a granular graphite matrix as the anode and a ferricyanide solution as the cathode is described. The maximal power outputs obtained were 90 and 66 W m(-3) net anodic compartment (NAC) (48 and 38 W m(-3) total anodic compartment (TAC)) for feed streams based on acetate and glucose, respectively, and 59 and 48 W m(-3) NAC for digester effluent and domestic wastewater, respectively. For acetate and glucose, the total Coulombic conversion efficiencies were 75 +/- 5% and 59 +/- 4%, respectively, at loading rates of 1.1 kg chemical oxygen demand m(-3) NAC volume day(-1). When wastewater was used, of the organic matter effectively removed (i.e., 22% at a loading of 2 kg organic matter m(-3) NAC day(-1)), up to 96% was converted to electricity on a Coulombic basis. The lower overall efficiency of the wastewater-treating reactors is related to the presence of nonreadily biodegradable organics and the interference of alternative electron acceptors such as sulfate present in the wastewater. To further improve MFCs, focus has to be placed on the enhanced conversion of nonrapidly biodegradable material and the better directing of the anode flow toward the electrode instead of to alternative electron acceptors. Also the use of sustainable, open-air cathodes is a critical issue for practical implementation.

Acetates↗
PubMed2005

Microbial phenazine production enhances electron transfer in biofuel cells.

High-rate electron transfer toward an anode in microbial fuel cells (MFCs) has thus far not been described for bacteria-producing soluble redox mediators. To studythe mechanism of electron transfer, we used a MFC isolate, Pseudomonas aeruginosa strain KRP1. Bacterial electron transfer toward the MFC anode was enabled through pyocyanin and phenazine-1-carboxamide. The presence of the anode stimulated pyocyanin production. Mutant strains, deficient in the synthesis of pyocyanin and phenazine-1-carboxamide, were unable to achieve substantial electron transfer and reached only 5% of the wild type's power output. Upon pyocyanin addition, the power output was restored to 50%. Pyocyanin was not only used by P. aeruginosa to improve electron transfer but as well enhanced electron transfer by other bacterial species. The finding that one bacterium can produce electron shuttles, which can be used also by other bacteria, to enhance electron-transfer rate and growth, has not been shown before. These findings have considerable implications with respect to the power output attainable in MFCs.

Bioelectric Energy Sources↗
PubMed2005

Microbial fuel cells: novel biotechnology for energy generation.

Microbial fuel cells (MFCs) provide new opportunities for the sustainable production of energy from biodegradable, reduced compounds. MFCs function on different carbohydrates but also on complex substrates present in wastewaters. As yet there is limited information available about the energy metabolism and nature of the bacteria using the anode as electron acceptor; few electron transfer mechanisms have been established unequivocally. To optimize and develop energy production by MFCs fully this knowledge is essential. Depending on the operational parameters of the MFC, different metabolic pathways are used by the bacteria. This determines the selection and performance of specific organisms. Here we discuss how bacteria use an anode as an electron acceptor and to what extent they generate electrical output. The MFC technology is evaluated relative to current alternatives for energy generation.

Biodegradation, Environmental↗
PubMed2004

Biofuel cells select for microbial consortia that self-mediate electron transfer.

Microbial fuel cells hold great promise as a sustainable biotechnological solution to future energy needs. Current efforts to improve the efficiency of such fuel cells are limited by the lack of knowledge about the microbial ecology of these systems. The purposes of this study were (i) to elucidate whether a bacterial community, either suspended or attached to an electrode, can evolve in a microbial fuel cell to bring about higher power output, and (ii) to identify species responsible for the electricity generation. Enrichment by repeated transfer of a bacterial consortium harvested from the anode compartment of a biofuel cell in which glucose was used increased the output from an initial level of 0.6 W m(-2) of electrode surface to a maximal level of 4.31 W m(-2) (664 mV, 30.9 mA) when plain graphite electrodes were used. This result was obtained with an average loading rate of 1 g of glucose liter(-1) day(-1) and corresponded to 81% efficiency for electron transfer from glucose to electricity. Cyclic voltammetry indicated that the enhanced microbial consortium had either membrane-bound or excreted redox components that were not initially detected in the community. Dominant species of the enhanced culture were identified by denaturing gradient gel electrophoresis and culturing. The community consisted mainly of facultative anaerobic bacteria, such as Alcaligenes faecalis and Enterococcus gallinarum, which are capable of hydrogen production. Pseudomonas aeruginosa and other Pseudomonas species were also isolated. For several isolates, electrochemical activity was mainly due to excreted redox mediators, and one of these mediators, pyocyanin produced by P. aeruginosa, could be characterized. Overall, the enrichment procedure, irrespective of whether only attached or suspended bacteria were examined, selected for organisms capable of mediating the electron transfer either by direct bacterial transfer or by excretion of redox components.

Animals↗
PubMed2003

Impact of iron salts on activated sludge and interaction with nitrite or nitrate.

Iron salts are often used in activated sludge treatment plants as coagulants or to improve reactor performance. Previous studies have indicated that iron itself has an impact on the activated sludge process. However, the interaction of iron with nitrite or nitrate present in the sludge has received little attention. In this research, the influence of addition of Fe(II) or Fe(III), alone or together with NO(2)(-) or NO(3)(-) on bench-scale activated sludge reactors was examined. Large differences were established between the distinct treatments, regarding reactor performance, sludge characteristics as well as microbial community. Ferric iron was more detrimental than ferrous iron. In some cases, nitrite was found to enhance inhibitory effects of the added iron, whereas nitrate had more a neutralizing effect. It was found that precipitation of phosphate by the iron was not responsible for the observed inhibition. Decrease in pH upon formation of iron hydroxides and the impairment of the floc structure could partially explain the toxicity of the iron dosages. The formation of toxic nitrogen oxides, such as nitric oxide, can also be of importance. The observed positive effect of nitrate on the floc activity is of interest and warrants further elucidation.

Biodegradation, Environmental↗
PubMed2003

A microbial fuel cell capable of converting glucose to electricity at high rate and efficiency.

A microbial fuel cell containing a mixed bacterial culture utilizing glucose as carbon source was enriched to investigate power output in relation to glucose dosage. Electron recovery in terms of electricity up to 89% occurred for glucose feeding rates in the range 0.5-3 g l(-1) d(-1), at powers up to 3.6 W m(-2) of electrode surface, a five fold higher power output than reported thus far. This research indicates that microbial electricity generation offers perspectives for optimization.

Bacteria, Anaerobic↗