PubMed Health⌕ Search

Biomedical subjects

Kornelius Zeth

Publications and source records attributed to Kornelius Zeth.

16 recordsLinked to original sources

The Tim21 binding domain connects the preprotein translocases of both mitochondrial membranes.

Proteins destined for the mitochondrial matrix are imported by the translocase of the outer membrane--the TOM complex--and the presequence translocase of the inner membrane--the TIM23 complex. At present, there is no structural information on components of the presequence translocase. Tim21, a subunit of the presequence translocase consisting of a membrane anchor and a carboxy-terminal domain exposed to the intermembrane space, directly connects the TOM and TIM23 complexes by binding to the intermembrane space domain of the Tom22 receptor. We crystallized the binding domain of Tim21 of Saccharomyces cerevisiae and determined its structure at 1.6 A resolution. The Tim21 structure represents a new alpha/beta-mixed protein fold with two alpha-helices flanked by an extended eight-stranded beta-sheet. We also identified a core sequence of Tom22 that binds to Tim21. Furthermore, negatively charged amino-acid residues of Tom22 are important for binding to Tim21. Here we suggest a mechanism for the TOM-TIM interaction.

Amino Acid Sequence↗

Dodecin sequesters FAD in closed conformation from the aqueous solution.

Both extensive theoretical calculations and experimental data obtained during several decades leave little doubt that flavin adenine dinucleotide (FAD) exists in an open as well as in a closed conformation in aqueous solution. However, the knowledge about the intramolecularly stacked complex of FAD is constructed on indirect methods while direct structural evidence is lacking. Recently, dodecin was reported as an unspecific flavin binding protein which exhibits the unique binding mode of incorporating stacked dimers of flavins into a single binding pocket. Here, we show that FAD is not bound in this manner, but in monomers of intramolecularly stacked conformation. As resulting from the dodecin ligand binding characteristic, this FAD stacked conformation suggests to be directly sequestered from the aqueous solution and thus to be the first X-ray structural view on a FAD solution-stacked form. Moreover, in extraordinary FAD binding, dodecin serves as a model for studying bound monomeric (FAD) versus bound dimeric (e.g. riboflavin) flavin properties.

Binding Sites↗

Expression, crystallization and preliminary X-ray analysis of the periplasmic stress sensory protein RseB from Escherichia coli.

Sensing external stress in the bacterial periplasm and signal transduction to the cytoplasm are important functions of the CpxAR, Bae and sigma(E) signalling pathways. In Escherichia coli, the sigma(E) pathway can be activated through degradation of the antisigma factor RseA by DegS and YaeL. The periplasmic protein RseB plays an important role in this pathway by exerting a direct or indirect negative effect on YaeL cleavage efficiency. RseB from E. coli, missing the periplasmic signal sequence (RseB(DeltaN)), was cloned, expressed, purified and crystallized. Crystals were obtained in two different forms belonging to space group P42(1)2 (form I) and C222(1) (form II) and diffracted to 2.8 and 2.4 A resolution, respectively. In crystal form I two copies of the protein were located in the asymmetric unit according to heavy-atom analysis, while crystal form II contained three copies.

Crystallization↗

Expression, crystallization and preliminary X-ray crystallographic studies of the outer membrane protein OmpW from Escherichia coli.

OmpW is an eight-stranded 21 kDa molecular-weight beta-barrel protein from the outer membrane of Gram-negative bacteria. It is a major antigen in bacterial infections and has implications in antibiotic resistance and in the oxidative degradation of organic compounds. OmpW from Escherichia coli was cloned and the protein was expressed in inclusion bodies. A method for refolding and purification was developed which yields properly folded protein according to circular-dichroism measurements. The protein has been crystallized and crystals were obtained that diffracted to a resolution limit of 3.5 angstroms. The crystals belong to space group P422, with unit-cell parameters a = 122.5, c = 105.7 angstroms. A homology model of OmpW is presented based on known structures of eight-stranded beta-barrels, intended for use in molecular-replacement trials.

Bacterial Outer Membrane Proteins↗

High resolution crystal structures and molecular dynamics studies reveal substrate binding in the porin Omp32.

The porin Omp32 is the major outer membrane protein of the bacterium Delftia acidovorans. The crystal structures of the strongly anion-selective porin alone and in complex with the substrate malate were solved at 1.5 and 1.45 A resolution, respectively, and revealed a malate-binding motif adjacent to the channel constriction zone. Binding is mediated by interaction with a cluster of two arginine residues and two threonines. This binding site is specific for Omp32 and reflects the physiological adaptation of the organism to organic acids. Structural studies are combined with a 7-ns unbiased molecular dynamics simulation of the trimeric channel in a model membrane. Molecular dynamics trajectories show how malate ions are efficiently captured from the surrounding bulk solution by the electrostatic potential of the channel, translocated to the binding site region, and immobilized in the constriction zone. In accordance with these results, conductance measurements with Omp32 inserted in planar lipid membranes revealed binding of malate. The anion-selective channel Omp32 is the first reported example of a porin with a 16-stranded beta-barrel and proven substrate specificity. This finding suggests a new view on the correlation of porin structure with substrate binding in specific channels.

Anions↗

Dodecins: a family of lumichrome binding proteins.

Dodecin is a small dodecameric flavoprotein from Halobacterium salinarum that contains two flavins stacked between two tryptophan residues to form an aromatic tetrade. The functional properties of heterologously expressed dodecin were investigated by fluorescence spectroscopy, which allowed the determination of dissociation constants for a number of protein-ligand complexes. The values obtained were in the nanomolar to micromolar range and correlate positively with the ligand size. These data were supplemented by X-ray crystal structures of the apododecin and holocomplexes with lumichrome, lumiflavin, riboflavin and FMN at resolutions between 1.55 to 1.95 A to unravel a gating mechanism as the structural basis for the preferential binding of the small ligands lumichrome and lumiflavin. The detailed analysis of the dodecin manifold for preferential binding of lumichrome and lumiflavin provides insight on a subatom level into a protein's strategy to gain selectivity for low molecular mass compounds by steric restrictions rather than specific interactions. Investigations on the ligand composition of a wild-type dodecin crystal (1.32 A resolution) support conclusions of functional and structural investigations on heterologously expressed dodecin, and strongly suggest that lumichrome, a molecule associated with the flavin metabolism, is a ligand of dodecin in vivo. Studies on mutant protein and a Halorhodospira halophila homologue spread the idea of a lumichrome binding system as a possible "waste"-trapping device, widely distributed in prokaryotes.

Amino Acid Sequence↗

Purification of the YadA membrane anchor for secondary structure analysis and crystallization.

Non-fimbrial adhesins, such as Yersinia YadA, Moraxella UspA1 and A2, Haemophilus Hia and Hsf, or Bartonella BadA, represent an important class of molecules by which pathogenic proteobacteria adhere to their hosts. They form trimeric surface structures with a head-rod-anchor architecture. Whereas their head and rod domains may be of heterologous origin, their anchor domains are homologous and display the properties of autotransporters. Conflicting topology models exist for these membrane anchors. Here, we describe the expression and purification of the membrane anchor of YadA from Yersinia enterocolitica for structural biology experiments. We expressed YadA-M in the Escherichia coli outer membrane. After solubilization and purification, it is a trimer of extreme stability. Using protein FTIR and secondary structure analysis, we show that the anchor is a beta-barrel, but contains a helical part at its N-terminus. We have crystallized the protein under various conditions and present X-ray data to 3.8 A resolution.

Adhesins, Bacterial↗

Structure of a halophilic nucleoside diphosphate kinase from Halobacterium salinarum.

Nucleoside diphosphate kinase from the halophilic archaeon Halobacterium salinarum was crystallized in a free state and a substrate-bound form with CDP. The structures were solved to a resolution of 2.35 and 2.2A, respectively. Crystals with the apo-form were obtained with His6-tagged enzyme, whereas the untagged form was used for co-crystallization with the nucleotide. Crosslinking under different salt and pH conditions revealed a stronger oligomerization tendency for the tagged protein at low and high salt concentrations. The influence of the His6-tag on the halophilic nature of the enzyme is discussed on the basis of the observed structural properties.

Crystallization↗

Iron-oxo clusters biomineralizing on protein surfaces: structural analysis of Halobacterium salinarum DpsA in its low- and high-iron states.

The crystal structure of the Dps-like (Dps, DNA-protecting protein during starvation) ferritin protein DpsA from the halophile Halobacterium salinarum was determined with low endogenous iron content at 1.6-A resolution. The mechanism of iron uptake and storage was analyzed in this noncanonical ferritin by three high-resolution structures at successively increasing iron contents. In the high-iron state of the DpsA protein, up to 110 iron atoms were localized in the dodecameric protein complex. For ultimate iron storage, the archaeal ferritin shell comprises iron-binding sites for iron translocation, oxidation, and nucleation. Initial iron-protein interactions occur through acidic residues exposed along the outer surface in proximity to the iron entry pore. This narrow pore permits translocation of ions toward the ferroxidase centers via two discrete steps. Iron oxidation proceeds by transient formation of tri-iron ferroxidase centers. Iron storage by biomineralization inside the ferritin shell occurs at two iron nucleation centers. Here, a single iron atom provides a structural seed for iron-oxide cluster formation. The clusters with up to five iron atoms adopt a geometry that is different from natural biominerals like magnetite but resembles iron clusters so far known only from bioinorganic model compounds.

Amino Acid Sequence↗

Expression, crystallization and crystallographic analysis of DegS, a stress sensor of the bacterial periplasm.

Regulated proteolysis is a key event in transmembrane signalling between intercellular compartments. In Escherichia coli, a protein DegS has been identified as being a periplasmic stress sensor for unfolded or misfolded outer membrane proteins (OMPs). Activation of DegS initiates a proteolytic cascade which results in the transcription of periplasmic genes under sigmaE control, most importantly chaperones and proteases. DegS has been cloned and expressed as full-length protein and in an N-terminally truncated form. Both proteins were tested for crystallization and two forms of well diffracting crystals of the truncated form were obtained. Crystals of form I diffract to 3.5 A and belong to space group P2(1)3, while crystals of form II diffract to 2.2 A and belong to space group I23. Crystals of form II were soaked with a consensus peptide representing the C-termini of outer membrane proteins and data to 2.4 A resolution were collected. Molecular-replacement trials using a homologous protease domain indicate the presence of two molecules in the asymmetric unit of crystal form I. The correctness of the molecular-replacement solution was verified by identifying radiation-damage-induced structural changes.

Crystallization↗

Structural analysis of DegS, a stress sensor of the bacterial periplasm.

Regulated proteolysis is a key event in transmembrane signalling between intracellular compartments. In Escherichia coli the membrane-bound protease DegS has been identified as the periplasmic stress sensor for unfolded outer membrane proteins (OMPs). DegS inititates a proteolytic cascade resulting in the release of sigmaE the transcription factor of periplasmic genes. The crystal structure of DegS protease reported at 2.2 A resolution reveals a trimeric complex with the monomeric protease domain in an inhibited state followed by the inhibitory PDZ domain. Noteably, domain architecture and communication of DegS are remarkably to homologous proteins known to date. Here the domain interface is mechanically locked by three intradomain salt bridges. Co-crystallisation trials in the presence of a 10-residue activating peptide did not result in significant structural intradomain shifts nor distortions in the crystal packing. These observations imply a mode of activation indicative of peptide-induced structural shifts imposed to the protease domain rather than disturbing the PDZ-protease interface.

Amino Acid Sequence↗

Substrate recognition by the AAA+ chaperone ClpB.

The AAA+ protein ClpB cooperates with the DnaK chaperone system to solubilize and refold proteins from an aggregated state. The substrate-binding site of ClpB and the mechanism of ClpB-dependent protein disaggregation are largely unknown. Here we identified a substrate-binding site of ClpB that is located at the central pore of the first AAA domain. The conserved Tyr251 residue that lines the central pore contributes to substrate binding and its crucial role was confirmed by mutational analysis and direct crosslinking to substrates. Because the positioning of an aromatic residue at the central pore is conserved in many AAA+ proteins, a central substrate-binding site involving this residue may be a common feature of this protein family. The location of the identified binding site also suggests a possible translocation mechanism as an integral part of the ClpB-dependent disaggregation reaction.

Adenosine Triphosphatases↗

AAA+ proteins and substrate recognition, it all depends on their partner in crime.

Members of the AAA+ superfamily have been identified in all organisms studied to date. They are involved in a wide range of cellular events. In bacteria, representatives of this superfamily are involved in functions as diverse as transcription and protein degradation and play an important role in the protein quality control network. Often they employ a common mechanism to mediate an ATP-dependent unfolding/disassembly of protein-protein or DNA-protein complexes. In an increasing number of examples it appears that the activities of these AAA+ proteins may be modulated by a group of otherwise unrelated proteins, called adaptor proteins. These usually small proteins specifically modify the substrate recognition of their AAA+ partner protein. The occurrence of such adaptor proteins are widespread; representatives have been identified not only in Escherichia coli but also in Bacillus subtilis, not to mention yeast and other eukaryotic organisms. Interestingly, from the currently known examples, it appears that the N domain of AAA+ proteins (the most divergent region of the protein within the family) provides a common platform for the recognition of these diverse adaptor proteins. Finally, the use of adaptor proteins to modulate AAA+ activity is, in some cases, an elegant way to redirect the activity of an AAA+ protein towards a particular substrate without necessarily affecting other activities of that AAA+ protein while, in other cases, the adaptor protein triggers a complete switch in AAA+ activity.

ATP-Dependent Proteases↗

Crystallization and preliminary X-ray analysis of the Escherichia coli adaptor protein ClpS, free and in complex with the N-terminal domain of ClpA.

Protein degradation in Escherichia coli is accomplished by a handful of large oligomeric complexes. In most cases, these proteolytic machines are comprised of a chaperone (e.g. ClpA) that is required to prepare the substrate for degradation by the peptidase (e.g. ClpP). Recently, it was shown that the substrate recognition of the chaperone ClpA could be modified by the adaptor protein ClpS. To investigate the structural implications of this change in substrate specificity, ClpS was crystallized alone and in complex with the N-terminal domain of ClpA (ClpA(N)). Crystals of ClpS diffract to 2.9 A resolution and belong to space group P2(1)2(1)2(1), with unit-cell parameters a = 82.63, b = 145.67, c = 152.31 A. Two different crystal forms of the ClpA(N)-ClpS complex were characterized. Crystal form I (CFI) belongs to the orthorhombic space group P2(1)2(1)2, with unit-cell parameters a = 91.63, b = 112.47, c = 38.47 A; data to 1.92 A resolution were collected. Crystals of form II (CFII) belong to space group P4(1/3)2(1)2, with unit-cell parameters a = b = 93.57, c = 78.77 A, and diffract to 1.85 A resolution. Data sets collected from heavy-atom derivatives of CFI indicated the incorporation of Pt and Hg atoms. Structure solution using MIR and MAD methods is currently under way.

Adenosine Triphosphatases↗

Structural analysis of the adaptor protein ClpS in complex with the N-terminal domain of ClpA.

In Escherichia coli, protein degradation is performed by several proteolytic machines, including ClpAP. Generally, the substrate specificity of these machines is determined by chaperone components, such as ClpA. In some cases, however, the specificity is modified by adaptor proteins, such as ClpS. Here we report the 2.5 A resolution crystal structure of ClpS in complex with the N-terminal domain of ClpA. Using mutagenesis, we demonstrate that two contact residues (Glu79 and Lys 84) are essential not only for ClpAS complex formation but also for ClpAPS-mediated substrate degradation. The corresponding residues are absent in the chaperone ClpB, providing a structural rationale for the unique specificity shown by ClpS despite the high overall similarity between ClpA and ClpB. To determine the location of ClpS within the ClpA hexamer, we modeled the N-terminal domain of ClpA onto a structurally defined, homologous AAA+ protein. From this model, we proposed a molecular mechanism to explain the ClpS-mediated switch in ClpA substrate specificity.

Adenosine Triphosphatases↗

The crystal structure of the L1 intermediate of halorhodopsin at 1.9 angstroms resolution.

The mutant T203V of the light driven chloride pump halorhodopsin from Halobacterium salinarum was crystallized and the X-ray structure was solved at 1.6 angstroms resolution. The T203V structure turned out to be nearly identical to the wild type protein with a root mean square deviation of 0.43 angstroms for the carbon alpha atoms of the protein backbone. Two chloride binding (CB) sites were demonstrated by a substitution of chloride with bromide and an analysis of anomalous difference Fourier maps. The CB1 site was found at the same position as in the wild type structure. In addition, a second chloride binding site CB2 was identified around Q105 due to higher resolution in the mutant crystal. As T203V showed a 10 times slower decay of its photocycle intermediate L, this intermediate could be trapped with an occupancy of 60% upon illumination at room temperature and subsequent cooling to 120 degrees K. Fourier transform infrared spectroscopy clearly identified the crystal to be trapped in the L1 intermediate state and the X-ray structure was solved to 1.9 angstroms resolution. In this intermediate, the chloride moved by 0.3 angstroms within binding site CB1 as indicated by peaks in difference Fourier density maps. The chloride in the second binding site CB2 remained unchanged. Thus, intraproteinous chloride translocation from the extracellular to the cytoplasmic part of the protein must occur in reaction steps following the L1 intermediate in the catalytic cycle of halorhodopsin.

Amino Acid Substitution↗