PubMed Health⌕ Search

Biomedical subjects

Kousaku Ohkawa

Publications and source records attributed to Kousaku Ohkawa.

11 recordsLinked to original sources
PubMed2006

Chain conformations of poly(gamma-benzyl-L-glutamate) pre and post an electrospinning process.

In order to reveal mechanisms for the electrospinning of proteins, this study focuses on the polymer chain conformation, which is considered to be a critical factor for successful electrospinning. Poly(gamma-benzyl-L-glutamate) (PBLG) is employed and the relationships between the chain conformations of the pre-spun PBLG molecules and the morphologies of the post-spun PBLG fibers are investigated. By combining viscosity measurements, and circular dichroism and FT-IR spectroscopies, chain conformations of the pre- and post-spun PBLG are characterized. The chain conformations of the pre-spun PBLG changes from an alpha-helix to a random coil upon changing the solvent ratios of dichloromethane (CH(2)Cl(2)) and trifluoroacetic acid (CF(3)COOH) from 100:0 to 0:100. In an alpha-helix conformation, the morphology of PBLG fibers is relatively thick, while that of the random coil is thin and homogenous. The mean fiber diameters decrease when the chain conformations change from an alpha-helix to a random coil. FT-IR spectroscopy and wide-angle X-ray diffraction measurements reveal that electrospinning predominantly induces an alpha-helical conformation in post-spun PBLG fibers, and more highly crystallized fibers are generated as the alpha-helical content in the pre-spun solution increases.

Electrochemistry↗
PubMed2006

Random and sequential copolypeptides containing O-phospho-L-threonine and L-aspartic acid; roles in CaCO3 biomineralization.

The present study describes the synthesis of novel polypeptides containing O-phospho-L-threonine [Thr(PO(3)H(2))] and L-aspartic acid. Random copolypeptides copoly[Thr(PO(3)H(2))(X)Asp(Y)] (X:Y = 25:75, 50:50, 75:25), were conventionally prepared by copolymerization of Thr(PO(3)Ph(2)) N-carboxyanhydride (NCA) and Asp(OBzl) NCA followed by deprotection of the phenyl and benzyl groups by catalytic hydrogenolysis over PtO(2). Polycondensation of the protected peptide p-nitrophenyl esters [Thr(PO(3)Ph(2))](Z)-Asp(OBzl)-ONp and subsequent deprotection yielded the sequential polypeptides poly[Thr(PO(3)H(2))(Z)-Asp] (Z = 1-4). By using the synthetic polypeptides, their effects on the growth of CaCO(3) crystals were examined. In the poly[Thr(PO(3)H(2))(Z)-Asp]/CaCO(3) systems, brushlike calcite and spherical vaterite were formed, with the former being found at [Ca(2+)]/[Res] ratios of > or =180, > or =140, > or =120, and > or =100 for Z = 1, 2, 3, and 4, respectively. These results indicate that an increase of Thr(PO(3)H(2)) residues in the repetitive unit induces the characteristic brushlike calcite, a fact indicating that Thr(PO(3)H(2)) residues can modify the CaCO(3) crystal morphology.

Amino Acid Sequence↗
PubMed2005

Alkaline phosphatase encapsulated in gellan-chitosan hybrid capsules.

Alkaline phosphatase (ALP) was encapsulated in gellan-chitosan polyion complex (PIC) capsules using a convenient procedure. The recovery of ALP was about 50% when the capsules were prepared by dropping a solution of ALP and gellan mixture (ALP/gellan) into a chitosan solution. When p-nitrophenyl phosphate (p-NPP) and 5-bromo-4-chloro-3-indolyl phosphate (BCIP) were incubated with ALP/gellan-chitosan capsules as substrates for ALP, the transparent colorless capsules changed to yellow and blue, respectively. The encapsulation of ALP into the PIC capsules was also confirmed by SDS-PAGE and immunoblot analyses. The ALP and polypeptides of more than 30 kDa remained without release even after incubation at 4 degrees C for 14 d. The biochemical properties of the encapsulated ALP activity were similar to those of the intact enzyme. When the solution containing p-NPP was loaded on a column packed with ALP/gellan-chitosan capsules at 27 degrees C, approximately 75% of p-NPP was hydrolyzed by passing through the column. No significant leakage of ALP was observed during the procedure, indicating that the capsules were resistant to pressure in the chromatographic operation. Furthermore, 70% of the hydrolytic activity of the packed capsules remained after storage at 4 degrees C for one month. These results suggest that the polyion complex capsules could be useful materials for protein fixation without chemical modification. [Diagram: see text] Encapsulation of ALP into PIC capsules and the morphological changes seen in the absence of the ALP substrate and in the presence of p-NPP and BICP.

Alkaline Phosphatase↗
PubMed2004

Synthesis of enzymatically crosslinkable peptide-poly(L-lysine) conjugate and creation of bio-inspired hybrid fibers.

Poly(L-lysine)s having an Nepsilon-substituted tetrapeptide, Lys-Gly-Tyr-Gly, were synthesized by the coupling of the protected tetrapeptide active ester, Boc-Lys(Z)-Gly-Tyr(Bzl)-Gly (4-hydroxyphenyl)dimethylsulfonium methylsulfate and Nepsilon-group of the poly(L-lysine) side chain. The Nepsilon-substituted tetrapeptide functions as the substrate of tyrosinase and is responsible for the enzyme-mediated interpolymer cross-linking. The degree of Nepsilon-substitution (DS) was mostly controlled by changing the stoichiometry between the Nepsilon-amino groups of the parent poly(L-lysine) and the protected tetrapeptide active ester. Two kinds of samples having DS values of 8.6 and 18 mol-% were prepared. The resulting cationic Nepsilon-(Lys-Gly-Tyr-Gly)-poly(L-lysine) (abbreviated as PLL(GYGK)) was spun into hybrid fibers with the anionic polysaccharide gellan via a polyionic complexation reaction at the interface between aqueous solutions of the two polymers. The mechanical strengths of the PLL(GYGK)-gellan hybrid fibers were superior to those of the original poly(L-lysine)-gellan fibers. The mechanical strength of the hybrid fibers further increased upon the tyrosinase-mediated cross-linking reaction of the PLL(GYGK). This result indicates that the covalent cross-bridge formation between the Nepsilon-substituted peptides significantly contributed to reinforcement of the hybrid fibers. The present study affords a new methodology for reinforcement inspired by a biological process.

Biomimetic Materials↗
PubMed2004

A glycosylated byssal precursor protein from the green mussel Perna viridis with modified dopa side-chains.

Foot tissue of the green mussel Perna viridis contains a variety of byssal precursor proteins with the unusual redox-active amino acid, Dopa (-beta-3,4-dihydroxyphenyl-alpha-alanine). Eight proteins were detectable in acidic extracts of the Perna foot by a redox cycling assay with nitroblue tetrazolium. In one of these, however, P. viridis foot protein-1 (Pvfp-1), activity was not due to Dopa, but to another redox-active derivative. Based on specific colorimetric derivatization with Arnow's reagent, ninhydrin and phenylisothiocyanate (Edman), mass spectrometry, the redox-active derivative in Pvfp-1 is not consistent with any known modification. Another uncommon modification of Pvfp-1 involves O-glycosylation of threonine by mannose, glucose or fucose. As in previously characterized fp-1s, the primary sequence of the Pvfp-1 (apparent mass 89 kDa) has two consensus decapeptide motifs; one is APPKPX1TAX2K and the other is APPPAX1TAX2K, where P is Pro/Hyp, and X1 and X2 are difucosylated threonine and a redox sensitive derivative of tyrosine or Dopa, respectively. Of these two unusual residues, X2 is unique to Pvfp-1, whereas O-glycosylated Thr has been previously detected in freshwater mussel fp-1. The sequence homology of Pvfp-1 with the common structural motifs of the fp-1 protein family strongly suggests that the Pvfp-1 functions as the byssal coating (lacquer) protein.

Adhesiveness↗
PubMed2003

Green mussel Perna viridis L.: attachment behaviour and preparation of antifouling surfaces.

The green mussel Perna viridis LINNE can be kept in simulated seawater for more than 6 months in good condition. The mussel forms many threads by secreting an adhesive protein from the foot, and attaches with more than 50 byssal threads, which makes most mussels clump together. In order to investigate the preparation of the antifouling surfaces toward green mussels, the attachment of mussels was tested using glass surfaces modified with silane coupling agents, together with non-treated material surfaces such as glass and silicone. The correlation between the attachment percentage and the mean number of the secreted byssus was highly significant, indicating that the mussel selects a favorable surface prior to the secretion of byssus. The relationships between the mussel attachment and the surface chemical parameters (surface free energy (sfe) and its dispersion and polar components) were examined based on a working hypothesis, which we have previously reported. The result of statistical regression test indicated that a certain correlation was found between the dispersion component and the mussel attachment, while the polar component did not correlate to the mussel attachment. The present surface chemical approach provided an additional clue for the preparation of ecologically clean antifouling materials that takes into account the combination of the wettability of both the marine adhesive proteins (MAP) and the modified surfaces.

Animals↗
PubMed2002

Preparation and characterization of DNA films induced by UV irradiation.

Large amounts of DNA-enriched materials, such as salmon milts and shellfish gonads, are discarded as industrial waste. We have been able to convert the discarded DNA to a useful material by preparing novel DNA films by UV irradiation. When DNA films were irradiated with UV light, the molecular weight of DNA was greatly increased. The reaction was inhibited by addition of the radical scavenger galvinoxyl suggesting that the DNA polymerization with UV irradiation proceeded by a radical reaction. Although this UV-irradiated DNA film was water-insoluble and resistant to hydrolysis by nuclease, the structure of the DNA film in water was similar to non-irradiated DNA and maintained B-form structure. In addition, the UV-irradiated DNA film could effectively accumulate and condense harmful DNA-intercalating compounds, such as ethidium bromide and acridine orange, from diluted aqueous solutions. The binding constant and exclusion number of ethidium bromide for UV-irradiated DNA were determined to be 6.8 +/- 0.3 x 10(4) M(-1) and 1.6 +/- 0.2, respectively; these values are consisted with reported results for non-irradiated DNA. The UV-irradiated DNA films have potential uses as a biomaterial filter for the removal of harmful DNA intercalating compounds.

Acridine Orange↗
PubMed2002

UV-irradiated DNA matrixes selectively bind endocrine disruptors with a planar structure.

DNA has unique chemical properties and is readily purified from salmon milts and shellfish gonads. DNA has few commercial uses and is generally discarded as an industrial waste. Recently, we prepared water-insoluble and nuclease-resistant DNA-films by UV irradiation. The DNA-films removed DNA-intercalating compounds. Here, we immobilized double-stranded DNA onto porous glass beads by UV irradiation and prepared DNA-immobilized glass bead columns. The DNA-immobilized columns effectively accumulated more DNA-intercalating materials than the DNA-films. The DNA-immobilized columns bound endocrine disruptors with a planar structure, such as dioxin-derivatives, polychlorobiphenyl (PCB)-derivatives, and benzo[a]pyrene. Bisphenol A and diethylstilbestrol, which lack a planar structure, did not bind to the DNA-immobilized columns. These results suggest that DNA-immobilized glass bead columns could selectively remove chemical compounds with a planar structure by intercalation into the double-stranded DNA. DNA-immobilized glass beads and DNA-films prepared by UV irradiation have the potential to serve as useful biomaterials for medical, engineering, and environmental applications.

Binding Sites↗
PubMedDate not supplied

Quinone cross-linked polysaccharide hybrid fiber.

The present article describes the synthesis of the N-(Lys-Gly-Tyr-Gly)-chitosan using the water-soluble active ester method, the preparation of the N-(Lys-Gly-Tyr-Gly)-chitosan-gellan hybrid fibers, and the reinforcement of the hybrid fibers by enzymatic cross-linking between the N-grafted peptides chains of chitosan. The cationic polysaccharide chitosan was treated with Boc-Lys(Z)-Gly-Tyr(Bzl)-Gly (4-hydroxyphenyl)dimethylsulfonium methyl sulfate ester in DMF-0.15 M acetic acid to incorporate the peptides into the side chain amino groups of chitosan followed by the acidic removals of the Z and Bzl groups. The degrees of N substitution were estimated to be 2.0 and 10 molar % by changing the molar ratios of the amino groups of the parent chitosan and the active ester. The resulting cationic N-(Lys-Gly-Tyr-Gly)-chitosan was spun into the hybrid fibers with the anionic polysaccharide gellan in water. The tensile strengths of the N-(Lys-Gly-Tyr-Gly)-chitosan hybrid fibers were superior to those of the original chitosan-gellan fibers. The mechanical strengths of the hybrid fibers further increased upon enzymatic oxidation using tyrosinase. Based on these results, we concluded that the covalent cross-linking due to the enzyme oxidation between the grafted peptides significantly contributed to reinforcement of the polysaccharide hybrid fibers. The present results afford a new methodology for the reinforcement achieved by the polymer modification inspired by a biological process.

Benzoquinones↗