Biomedical subjects

Kozo Ogawa

Publications and source records attributed to Kozo Ogawa.

8 recordsLinked to original sources

PubMed2004

Molecular and crystal structures of chitosan/HI type I salt determined by X-ray fiber diffraction.

The three-dimensional structure of chitosan/HI type I salt was determined by the X-ray fiber diffraction technique and linked-atom least-squares refinement method. Two polymer chains and four iodide ions (I(-)) crystallized in a monoclinic unit cell with dimensions a = 9.46(2), b = 9.79(2)], c (fiber axis)=10.33(2)A, beta = 105.2(2) degrees and a space group P2(1). Chitosan chains adopted an extended twofold helical conformation that was stabilized by O-3...O-5 hydrogen bonds, and the O-6 atom adopted nearly gt orientation. Polymer chains zigzag along the b-axis and directly connect to each other by N-2...O-6 hydrogen bonds. Two columns of iodide ions were shown to pack at the bending points of the zigzag sheets, and their locations are closely related to those of water columns in the hydrated chitosan. The iodide ions stabilized the salt structure by forming hydrogen bonds with the N-2 and O-6 atoms of the polymer chains together with an electrostatic interaction between N-2 and the iodide ions.

Animals↗

PubMed2004

Plausible molecular and crystal structures of chitosan/HI type II salt.

Chitosan/HI type II salt prepared from crab tendon was investigated by X-ray fiber diffraction. Two polymer chains and 16 iodide ions (I(-)) crystallized in a tetragonal unit cell with lattice parameters of a = b = 10.68(3), c (fiber axis) = 40.77(13) A, and a space group P4(1). Chitosan forms a fourfold helix with a 40.77 A fiber period having a disaccharide as the helical asymmetric unit. One of the O-3... O-5 intramolecular hydrogen bonds at the glycosidic linkage is weakened by interacting with iodide ions, which seems to cause the polymer to take the 4/1-helical symmetry rather than the extended 2/1-helix. The plausible orientations of two O-6 atoms in the helical asymmetric unit were found to be gt and gg. Two chains are running through at the corner and the center of the unit cell along the c-axis. They are linked by hydrogen bonds between N-21 and O-61 atoms. Two out of four independent iodide ions are packed between the corner chains while the other two are packed between the corner and center chains when viewing through the ab-plane. The crystal structure of the salt is stabilized by hydrogen bonds between these iodide ions and N-21, N-22, O-32, O-61, O-62 of the polymer chains.

Animals↗

PubMed2004

Three D structures of chitosan.

Crystal structures of two polymorphs of chitosan, tendon (hydrated) and annealed (anhydrous) polymorphs, have been reported. In both crystals, chitosan molecule takes up similar conformation (Type I form) to each other, an extended two-fold helix stabilized by intramolecular O3-O5 hydrogen bond, which is also similar to the conformation of chitin or cellulose. Three chitosan conformations other than Type I form have been found in the crystals of chitosan-acid salts. In the salts with acetic and some other acids, called Type II salts, chitosan molecule takes up a relaxed two-fold helix composed of asymmetric unit of tetrasaccharide. This conformation seems to be unstable because no strong intramolecular hydrogen bond like Type I form. Type II crystal changes to the annealed polymorph of chitosan by a spontaneous water-removing action of the acid. Chitosan molecule in its hydrogen iodide salt prepared at low temperature takes a 4/1 helix with asymmetric unit of disaccharide. The fourth chitosan conformation was found to be a 5/3 helix in chitosan salts with medical organic acids having phenyl group such as salicylic or gentisic acids. Similar conformation of chitosan molecule in the aspirin (acetylsalicylic acid) salt was suggested by a solid-sate NMR measurement.

Chitosan↗

PubMed2003

Two different molecular conformations found in chitosan type II salts.

The type II structure of chitosan acidic salts prepared from crab tendon in solid state was studied using an X-ray fiber diffraction technique together with the linked-atom least-squares (LALS) technique. The cylindrical Patterson method was applied to confirm the molecular conformation of the chitosan. It was shown that there are two different helical conformations for type II salts. One is the relaxed twofold helix having a tetrasaccharide as an asymmetric unit as found in chitosan.HCl salt, which was previously reported as a conformation of chitosan.HCOOH salt. The other is the fourfold helix having a disaccharide as an asymmetric unit newly found in chitosan.HI salt.

Carbohydrate Conformation↗

PubMed2003

Fourth 3D structure of the chitosan molecule: conformation of chitosan in its salts with medical organic acids having a phenyl group.

Chitosan salts with two medical organic acids having phenyl groups (salicylic and gentisic acids) exhibited fiber diffraction patterns of a new type of crystal which does not compare with known types I and II. The crystals, called type III salts, showed a fiber repeat of 2.550 nm and a meridional reflection at the 5th layer line. These results coupled with a conformational analysis indicate the chain conformation of chitosan with the salts to be a 5/3 helix, this helix differing from those of type I (an extended two-fold helix) and type II (a relaxed two-fold helix or a 4/1 helix). The fiber patterns of all the type III salts were similar. This observation has also been found with type II salts and is an indication that the acid ions are not arranged in regular positions in the crystals. A comparison of solid-state 13C-NMR spectra of the gentisic acid salt and the aspirin salt, which could not be crystallized, suggests that, in the latter salt, the chitosan molecules also formed a 5/3 helix.

Acids↗

PubMed2003

Dependence of the mechanical properties of a pullulan film on the preparation temperature.

The mechanical properties of pullulan films prepared at various temperatures were investigated. The films prepared at high temperatures (40 degrees C and 60 degrees C; H-films) did not show any clear plastic deformation in tensile test, indicating that they were brittle. In contrast, those prepared at low temperatures (4 degrees C, 13 degrees C, and 25 degrees C; L-films) showed such deformation. The latter films had higher values for both tensile strength and elastic modulus than the former, indicating that the L-films were stiffer and more flexible than the H-films. Stretching the L-films clearly showed a shear deformation band inclined at 45 degrees to the stretching direction, indicating that they were amorphous.

Elasticity↗

PubMed2002

X-ray structure analysis of the sodium salt of beijeran.

The three-dimensional structure of the sodium salt of beijeran has been determined by X-ray fiber diffraction analysis. The acidic polysaccharide forms an extended twofold helix. Two chains are nestled tightly in a monoclinic unit cell of dimensions a=12.72, b=11.41, c (fiber axis)=24.62 A and gamma=123.7 degree in an antiparallel fashion. In the crystalline lattice, helices are stacked tightly to form a thick sheet along the vertical plane passing through the short diagonal of the basal net. Adjacent sheets associate via a network of sodium ions and water molecules embedded between them. The morphology of sodium beijeran in the solid state is consistent with its observed rheological properties.

Azotobacter↗

PubMedDate not supplied

Effect of addition of water-soluble chitin on amylose film.

Amylose films blended with chitosan, which were free from additives such as acid, salt, and plasticizer, were prepared by casting mixtures of an aqueous solution of an enzymatically synthesized amylose and that of water-soluble chitin (44.1% deacetylated). The presence of a small amount of chitin (less than 10%) increased significantly the permeability of gases (N2, O2, CO2, C2H4) and improved the mechanical parameters of amylose film; particularly, the elastic modulus and elongation of the blend films were larger than those of amylose or chitin films. No antibacterial activity was observed with either amylose or water-soluble chitin films. But amylose films having a small amount of chitin showed strong antibacterial action, suggesting a morphological change in water-soluble chitin on the film surface by blending with amylose molecule. These facts suggested the presence of a molecular complex of amylose and chitosan.

Acetylation↗