Biomedical subjects

Krishnan B Chandran

Publications and source records attributed to Krishnan B Chandran.

10 recordsLinked to original sources

PubMed2006

An experimentally derived stress resultant shell model for heart valve dynamic simulations.

In order to achieve a more realistic and accurate computational simulation of native and bioprosthetic heart valve dynamics, a finite shell element model was developed. Experimentally derived and uncoupled in-plane and bending behaviors were implemented into a fully nonlinear stress resultant shell element. Validation studies compared the planar biaxial extension and three-point bending simulations to the experimental data and demonstrated excellent fidelity. Dynamic simulations of a pericardial bioprosthetic heart valve with the developed shell element model showed significant differences in the deformation characteristics compared to the simulation with an assumed isotropic bending model. The new finite shell element model developed in the present study can also incorporate various types of constitutive models and is expected to help us to understand the complex dynamics of native and bioprosthetic heart valve function in physiological and pathological conditions.

Animals↗

PubMed2006

Plaque development, vessel curvature, and wall shear stress in coronary arteries assessed by X-ray angiography and intravascular ultrasound.

The relationships among vascular geometry, hemodynamics, and plaque development in the coronary arteries are complex and not yet well understood. This paper reports a methodology for the quantitative analysis of in vivo coronary morphology and hemodynamics, with particular emphasis placed on the critical issues of image segmentation and the automated classification of disease severity. We were motivated by the observation that plaque more often developed at the inner curvature of a vessel, presumably due to the relatively lower wall shear stress at these locations. The presented studies are based on our validated methodology for the three-dimensional fusion of intravascular ultrasound (IVUS) and X-ray angiography, introducing a novel approach for IVUS segmentation that incorporates a robust, knowledge-based cost function and a fully optimal, three-dimensional segmentation algorithm. Our first study shows that circumferential plaque distribution depends on local vessel curvature in the majority of vessels. The second study analyzes the correlation between plaque distribution and wall shear stress in a set of 48 in vivo vessel segments. The results were conclusive for both studies, with a stronger correlation of circumferential plaque thickness with local curvature than with wall shear stress. The inverse relationship between local wall shear stress and plaque thickness was significantly more pronounced (p<0.025) in vessel cross sections exhibiting compensatory enlargement (positive remodeling) without luminal narrowing than when the full spectrum of disease severity was considered. The inverse relationship was no longer observed in vessels where less than 35% of vessel cross sections remained without luminal narrowing. The findings of this study confirm, in vivo, the hypothesis that relatively lower wall shear stress is associated with early plaque development.

Computer Simulation↗

PubMed2006

Dynamic simulation pericardial bioprosthetic heart valve function.

While providing nearly trouble-free function for 10-12 years, current bioprosthetic heart valves (BHV) continue to suffer from limited long-term durability. This is usually a result of leaflet calcification and/or structural degeneration, which may be related to regions of stress concentration associated with complex leaflet deformations. In the current work, a dynamic three-dimensional finite element analysis of a pericardial BHV was performed with a recently developed FE implementation of the generalized nonlinear anisotropic Fung-type elastic constitutive model for pericardial BHV tissues (W. Sun and M.S. Sacks, 2005, [Biomech. Model. Mechanobiol., 4(2-3), pp. 190-199]). The pericardial BHV was subjected to time-varying physiological pressure loading to compute the deformation and stress distribution during the opening phase of the valve function. A dynamic sequence of the displacements revealed that the free edge of the leaflet reached the fully open position earlier and the belly region followed. Asymmetry was observed in the resulting displacement and stress distribution due to the fiber direction and the anisotropic characteristics of the Fung-type elastic constitutive material model. The computed stress distribution indicated relatively high magnitudes near the free edge of the leaflet with local bending deformation and subsequently at the leaflet attachment boundary. The maximum computed von Mises stress during the opening phase was 33.8 kPa. The dynamic analysis indicated that the free edge regions of the leaflets were subjected to significant flexural deformation that may potentially lead to structural degeneration after millions of cycles of valve function. The regions subjected to time varying flexural deformation and high stresses of the present study also correspond to regions of tissue valve calcification and structural failure reported from explanted valves. In addition, the present simulation also demonstrated the importance of including the bending component together with the in-plane material behavior of the leaflets towards physiologically realistic deformation of the leaflets. Dynamic simulations with experimentally determined leaflet material specification can be potentially used to modify the valve towards an optimal design to minimize regions of stress concentration and structural failure.

Animals↗

PubMed2006

Coronary arteries: imaging, reconstruction, and fluid dynamic analysis.

Atherosclerosis is the underlying cause of most cardiovascular-related deaths in industrialized nations. Determining the etiology of atherosclerosis and detecting lesions in the early stages of the disease for possible pharmacological or mechanical intervention have been challenges facing cardiovascular researchers. In addition to genetic and environmental factors, the formation and growth of atheroma have been linked to the complex fluid dynamics and mass transport in these arterial segments. This article reviews the current state of affairs in imaging modalities and image processing techniques that allow the visualization and morphologically realistic reconstruction of coronary arterial geometry to aid in the diagnosis and treatment of coronary artery disease (CAD). In addition, studies pertaining to our current understanding of the complex flow dynamics in the coronary arteries and the relationship between fluid-induced stresses on the initiation and growth of the atherosclerotic lesions are also reviewed. The article concludes with a brief discussion on possible future directions of research that will advance our knowledge of this challenging problem.

Animals↗

PubMed2005

Regional material property alterations in porcine femoral arteries with atheroma development.

We have developed a novel methodology that permits assessment of regional vascular mechanical property alterations in the presence of atheroma in vivo employing a Yucatan miniswine model with induced lesions. Femoral arteries were imaged with intravascular ultrasound. Image data were segmented and, following three-dimensional reconstruction, underwent finite element and sensitivity analysis with optimization to identify regions with altered vascular mechanical properties. All regions were compared to histological analysis. In 12 animals with 8 weeks of endothelial cell denudation and high cholesterol diet (induced atherosclerosis), the elastic modulus initially decreased with early lesion development and then increased with increasing fibrosis-(elastic modulus-all values x10(4)Pa-mean+/-SEM) histologically normal (non-denuded control segment) elements 9.73+/-0.01, fatty elements 9.53+/-0.01, fibrofatty elements 9.41+/-0.03, and fibrous elements 9.68+/-0.02 (all p<0.001 vs. normal elements). Wall thickness, however, increased with atheroma formation. These data demonstrate decreasing vascular material properties with early lesions, followed by an increase as lesions progress. This methodology permits determination of areas with early atheroma development, follow atheroma progression, and potentially evaluate interventions aimed at decreasing atheroma load and normalizing vascular material properties.

Animals↗

PubMed2005

Porcine carotid arterial material property alterations with induced atheroma: an in vivo study.

OBJECTIVE: A novel methodology has been developed to evaluate regional alterations in arterial wall material properties with induced atheroma in an animal model. METHODS: Atheromatous lesions (fatty, fibro-fatty, and fibrous) were induced in the carotid arteries of a Yucatan miniswine model by endothelial cell denudation and high cholesterol diet. The images at base line and 8 weeks after denudation were obtained using intravascular ultrasound (IVUS) imaging along with hemodynamic data. Finite element analysis (FEA) along with optimization was employed to assess regional alterations in elastic modulus in the presence of atheroma confirmed by histology. RESULTS: In animals with 8 weeks of induced atherosclerosis, the elastic modulus increased-(elastic modulus-all values x 10(4) Pa, mean+/-S.D.) normal elements (9.34+/-0.36) compared to abnormal elements (9.52+/-0.36) (p<0.05 versus normal elements). Wall thickness increased with atheroma formation. These data demonstrate stiffening vascular wall elastic modulus with lesion progression. This is different from the behavior of femoral arteries, where the elastic modulus decreases with early stages of atheroma development followed by an increase as lesions progress. CONCLUSIONS: This methodology permits determination of areas with early atheroma development, follow atheroma progression, and potentially evaluate interventions aimed at decreasing atheroma load and normalizing vascular material properties.

Animals↗

PubMed2004

Alteration in fluid mechanics in porcine femoral arteries with atheroma development.

Although the relationship between the local wall shear stresses (WSS) and atheroma development has been previously studied, the effect of variable regional wall distensibility with early atherosclerotic lesions and its effect on local hemodynamics have not been well investigated. We induced early atherosclerotic lesion development in one femoral artery in a Yucatan miniswine model with the contralateral artery serving as control. Eight weeks following atheroma formation, hemodynamic and intravascular ultrasound image data were obtained. Using the measured regional arterial distension as the moving boundary condition, unsteady laminar incompressible computational analysis was performed on the reconstructed arterial segments. With the development of early atherosclerotic lesions, there was increased wall distensibility and an increase in the computed normalized wall shear stress amplitude (NWSA). Alterations in the local fluid mechanics and mass transport at these sites may need to be considered in our understanding of the continued growth of these lesions.

Aging↗

PubMed2004

Three-dimensional fluid-structure interaction simulation of bileaflet mechanical heart valve flow dynamics.

The wall shear stress induced by the leaflet motion during the valve-closing phase has been implicated with thrombus initiation with prosthetic valves. Detailed flow dynamic analysis in the vicinity of the leaflets and the housing during the valve-closure phase is of interest in understanding this relationship. A three-dimensional unsteady flow analysis past bileaflet valve prosthesis in the mitral position is presented incorporating a fluid-structure interaction algorithm for leaflet motion during the valve-closing phase. Arbitrary Lagrangian-Eulerian method is employed for incorporating the leaflet motion. The forces exerted by the fluid on the leaflets are computed and applied to the leaflet equation of motion to predict the leaflet position. Relatively large velocities are computed in the valve clearance region between the valve housing and the leaflet edge with the resulting relatively large wall shear stresses at the leaflet edge during the impact-rebound duration. Negative pressure transients are computed on the surface of the leaflets on the atrial side of the valve, with larger magnitudes at the leaflet edge during the closing and rebound as well. Vortical flow development is observed on the inflow (atrial) side during the valve impact-rebound phase in a location central to the leaflet and away from the clearance region where cavitation bubbles have been visualized in previously reported experimental studies.

Blood Flow Velocity↗

PubMed2003

Two-dimensional fluid-structure interaction simulation of bileaflet mechanical heart valve flow dynamics.

BACKGROUND AND AIM OF THE STUDY: Mechanical heart valve implantation requires long-term anticoagulation because of thromboembolic complications. Recent studies have indicated that the relatively high wall shear stresses and negative pressure transients developed during the valve closing phase may be dominant factors inducing thrombus initiation. The study aim was a two-dimensional (2D) functional simulation of flow past bileaflet heart valve prosthesis during the closing phase, incorporating the fluid-structure interaction analysis to induce motion of the leaflets. METHODS: The fluid-structure interaction model used was based on unsteady 2D Navier-Stokes equations with the arbitrary Lagrangian-Eulerian method for moving boundaries, coupled with the dynamic equation for leaflet motion. Parametric analysis of the effect of valve size, leaflet density, and the coefficient of resilience at the instant of impact of the leaflet with the housing were also performed. RESULTS: Comparing the predicted motion of the leaflet with previous experimental results validated the simulation. The results showed the presence of negative pressure transients near the inflow side of the leaflet at the instant of valve closure, and the negative pressure transients were augmented during the leaflet rebound process. Relatively high velocities and wall shear stresses, detrimental to the formed elements in blood were present in the clearance region between the leaflet and valve housing at the instant of valve closure. CONCLUSION: The simulation can be potentially applied to analyze the effects of valve geometry and dimensions, and the effect of leaflet material on the flow dynamics past the valve prosthesis during the opening and closing phases for design improvements in minimizing problems associated with thromboembolic complications.

Biomechanical Phenomena↗

PubMed2002

A numerical simulation of mechanical heart valve closure fluid dynamics.

A computational fluid dynamics model for the analysis of the bileaflet mechanical heart valve closure process is presented. The objective of the study is to demonstrate the ability of the numerical model to simulate the leaflet motion during the closing phase in order to investigate the closure fluid dynamics and to evaluate the effect of alterations in the leaflet tip geometry. The model has been applied to six different combinations of the leaflet tip geometry and the gap width between the leaflet tip and the housing. The results show that the negative pressure quickly develops on the atrial side of the leaflet tip. The pressure becomes more negative as the leaflet closure progresses and the lowest pressure is reached before the leaflet comes to a stop in the closed position. The flow dynamics at the instant of valve closure is strongly dependent on the leaflet velocity during the closing phase. Decrease of the tip velocity by a factor of three in the last four degrees of leaflet motion leads to a 50% reduction in the negative pressure magnitude.

Biomechanical Phenomena↗