PubMed Health⌕ Search

Biomedical subjects

Kyösti Kontturi

Publications and source records attributed to Kyösti Kontturi.

At least 19 recordsLinked to original sources
PubMed2006

Stability and electrostatics of mercaptoundecanoic acid-capped gold nanoparticles with varying counterion size.

The solubility of charged nanoparticles is critically dependent on pH. However, the concentration range available with bases such as NaOH is quite narrow, since the particles precipitate due to compression of the electric double layer when the ionic strength is increased. The stability of mercaptoundecanoic acid-capped Au nanoparticles is studied at a set pH using the hydroxide as base and different cations of various sizes. The counterions used are sodium (Na(+)), tetramethylammonium (TMA(+)), tetraethylammonium (TEA(+)), and tetrabutylammonium (TBA(+)). The particles precipitate in the 70-90 mM range with Na(+) as the counterion, but with quaternary ammonium hydroxides the particles are stable even in concentrations exceeding 1 M. The change in solubility is linked to a strongly adsorbed layer on the surface of the ligand shell of the nanoparticles. The increased concentration range obtained with TEAOH is further used to facilitate thiol exchange which occurs at a greater extent than would be achieved in NaOH solution.

Cations↗
PubMed2006

Improving membrane activity of oligonucleotides by cetylpyridinium chloride: an electrochemical study.

The interaction of phospholipid membranes and oligonucleotides complexed with a positively charged surfactant is reported. Phospholipid membranes were assembled at the interface between an immobilized organic phase and an aqueous phase using the Langmuir-Blodgett (L-B) technique. The interaction and adsorption of the naked oligonucleotides and oligonucleotides complexed with cetylpyridinium chloride (CP) was studied electrochemically using cyclic voltammetry (CV) and ac-voltammetry. Interfacial capacitance, obtained indirectly from ac-voltammetry as a function of interfacial potential, was fitted to the theory based on the solution of the Poisson-Boltzmann equation. It was shown that both types of naked oligonucleotides (phosphoromonothioates and phosphodiesters) adsorb on the lipid monolayers poorly. The introduction of CP to the system increases the adsorption efficiency significantly. However, one phosphoromonothioate appeared to form a compact globule with CP instead of adsorbing to the lipid membrane. These results demonstrate that electrochemical methods are a powerful tool for probing the behavior of drugs in the vicinity of model cell membranes.

Adsorption↗
PubMed2006

Formation of stable Ag-nanoparticle aggregates induced by dithiol cross-linking.

Aggregation of thiol-stabilized silver nanoparticles induced by 1,6-hexane dithiol was studied in situ by dynamic light scattering. The aggregates were observed to reach a finite size in the 100-200 nm range depending on the applied conditions. Growth kinetics were shown to be linked to the dynamics of the thiol-exchange reaction. A model for the aggregation process was developed on the basis of a simple diffusion-kinetic approach assuming an elementary kinetic reaction at the surfaces and a spherical diffusion field surrounding the aggregates. The rate constant for the thiol exchange reaction was found to vary between 0.6 and 4.0 x 10(-4) s(-1), and the activation energy was 46 +/- 10 kJ mol(-1).

Journal Article↗
PubMed2005

Electrochemical study of interfacial composite nanostructures: polyelectrolyte/gold nanoparticle multilayers assembled on phospholipid/dextran sulfate monolayers at a liquid-liquid interface.

The build up and electrochemical characterization of interfacial composite nanostructures containing a cationic polyelectrolyte and negatively charged mercaptosuccinic acid stabilized gold nanoparticles (AuNPs) is reported. The nanostructures were formed at the interface between two immiscible electrolyte solutions in which the organic phase is an immobilized 2-nitrophenyl octyl ether/PVC gel. The growth of the multilayer was verified with UV-vis spectra, and approximately a linear increase in UV-vis absorbance with increasing number of layers was observed. The interfacial capacitance of the multilayers was measured as a function of the potential and a theoretical model was developed to explain the results. The excellent agreement between theoretical and experimental capacitance curves allows us to conclude that nanocomposites behave similarly to polyelectrolyte multilayers, with the outmost layer determining the alternating sign of the outer surface charge density. Cyclic voltammograms were used to evaluate the transfer rate constant across the multilayers of a model drug, metoprolol, and the standard probe tetraethylammonium cation. The apparent rate constants were slightly larger than in other studies in the literature and decrease with the increasing number of layers.

Catalysis↗
PubMed2005

Channel flow configuration for studying the kinetics of surfactant-polyelectrolyte binding.

A novel channel flow configuration was developed and utilized for studying the poly(styrenesulfonate)-cetylpyridinium ion interaction kinetics. The surfactant solution was continuously injected into a flow of polyelectrolyte solution, and the extent of the association reaction was probed at an ion-selective detector electrode. The system was modeled within an analytical approximation, which was tested by a finite-element simulation of the full convective mass transport problem including the homogeneous complexation reaction. The results show that association kinetics can be resolved and that the initial steps of the reaction are not influenced by intermolecular interactions between the bound surfactants. The presented methodology is general, and further development should enable the study of complex cooperative kinetics of surfactant-polyelectrolyte systems.

Cetylpyridinium↗
PubMed2005

Interfacial interaction between dextran sulfate and lipid monolayers: an electrochemical study.

The interaction between dextran sulfate (DS) with zwitterionic dipalmitoylphosphatidylcholine (DPPC) and negatively charged dipalmitoylphosphatidic acid monolayers at different surface pressures at air-liquid and liquid-liquid interfaces was studied using Langmuir-Blodgett (LB) and electrochemical techniques. The negatively charged DS can bind to phospholipids via calcium ions. To investigate the mechanism of the adsorption of DS on lipid monolayers, compression isotherms (pi-A) and capacitance-potential curves were measured, and a theoretical model was developed to interpret the capacitance data. The compression of lipid monolayers in the presence of DS led to a more condensed hybrid layer, removing the LE-LC phase transition of DPPC. Lower surface pressures improved the binding of DS on the lipid monolayers via calcium bridges due to the electrostatic attraction. Alternating current voltammetry and cyclic voltammetry were used to monitor the transfer of a cationic beta-blocker (metoprolol) across lipid monolayers in the absence and presence of the polyelectrolyte and to compare with the transfer of the standard probe, tetraethylammonium cation. Results showed a strong dependence on (i) the surface pressure, (ii) the applied potential, and, (iii) in the case of the hybrid layer, the charge of the phospholipid headgroup. Finally, results were also confirmed by attenuated total reflection Fourier transform infrared spectroscopy, performed after transferring lipid multilayers onto a solid substrate by the LB method.

1,2-Dipalmitoylphosphatidylcholine↗
PubMed2004

Reductive desorption of thiolate from monolayer protected gold clusters.

The "electrochemical potential window" of monolayer-protected gold cluster (MPC) nanoelectrodes is probed where the electrified liquid-liquid interface is used as the detector. The first observation of the reductive desorption of thiolate at negative MPC core charge is reported.

Journal Article↗
PubMed2004

Electron transport in two-dimensional arrays of gold nanocrystals investigated by scanning electrochemical microscopy.

This article reports the use of the scanning electrochemical microscope (SECM) to investigate the electronic properties of Langmuir monolayers of alkane thiol protected gold nanocrystals (NCs). A substantial increase in monolayer conductivity upon mechanical compression of the Au NC monolayer is reported for the first time. This may be the room temperature signature of the insulator to metal transition previously reported for comparable silver NC monolayers. Factors influencing the conductivity of the monolayer NC array are discussed.

Journal Article↗
PubMed2004

Amperometric method for determining the degree of complexation of polyelectrolytes with cationic surfactants.

The complexation of sodium polystyrene sulfonate with monovalent cationic surfactants at a microsized liquid/liquid interface has been studied using electrochemistry. The method is based on measurement of surfactant ion transfer across the interface between two immiscible electrolyte solutions (ITIES). The complexation of various cationic surfactants (alkylpyridinium- and trimethylammonium-) with oligosized polystyrene sulfonate was measured. Binding isotherms were used to determine the degree of binding as a function of the surfactant chain length and type of head group. It was found that the hydrophobicity of the surfactant was the predominant factor. The effect of the polyelectrolyte chain length on the binding mechanism was studied using cetylpyridinium chloride as a complexing agent. It was found that binding affinity, as well as cooperativity of the binding process, decreases with decreasing polyelectrolyte chain length. Thermodynamics of surfactant binding was measured using titration microcalorimetry. The thermodynamic data obtained show that the enthalpy of surfactant binding is not dependent on polymer chain length, but an increase in chain length makes the binding process entropically more favorable.

Calorimetry↗
PubMed2004

Drug permeation in biomembranes: in vitro and in silico prediction and influence of physicochemical properties.

In the past decades, it has become increasingly apparent that in addition to therapeutic effect, drugs need to exhibit favourable absorption, distribution, metabolism and excretion (ADME) characteristics to produce a desirable response in vivo. As the recent progress in drug discovery technology enables rapid synthesis of vast numbers of potential drug candidates, robust methods are required for the effective screening of compounds synthesized within such programs, so that compounds with poor pharmacokinetic properties can be rejected at an early stage of drug development. Furthermore, a viable in silico method would save resources by enabling virtual screening of drug candidates already prior to synthesis. This review gives a general overview of the approaches aimed at predicting biological permeation, one of the cornerstones behind the ADME behaviour of drugs. The most important experimental and computational models are reviewed. Physicochemical factors underlying the permeation process are discussed.

Algorithms↗
PubMed2004

Electrochemical and calorimetric study of oligonucleotide complexation with cetylpyridinium chloride.

The complexation of oligonucleotides and antisense drugs with a cationic surfactant, cetylpyridinium chloride (CPC), has been studied using electrochemistry at a micrometer sized liquid/liquid interface. This method can be used to investigate the effect of chemical and structural modifications on the complexation behaviour of oligonucleotides. For the interaction between CPC and oligonucleotides the effect of phosphorothioate derivatisation upon binding characteristics has been examined. Phosphoromonothioate modification causes the onset of binding to occur at a lower free surfactant concentration. Calorimetric studies show that surfactants are strongly bound to oligonucleotides and the binding is driven by entropy. The enthalpy change for the formation of oligonucleotide-surfactant complex is negative in all cases at 25 degrees C indicating exothermic reaction.

Calorimetry↗
PubMed2003

Membrane activity of biotechnological peptide drugs.

Charged Langmuir-Blodgett monolayers deposited at an immobilised liquid-liquid interface have been used as a simple model for a biological membrane to investigate the membrane activity of biotechnological oligopeptide drugs.

Biotechnology↗
PubMed2003

Drug adsorption in human skin: a streaming potential study.

The objective of this study was to investigate the drug adsorption process in human skin using in vitro streaming potential measurements. Streaming potential is an electrokinetic phenomenon, which reflects both the charge density and the pore size of a membrane. Thus, the adsorption of charged solutes on the pore walls can be detected as a change of streaming potential, viz., as a change in the slope deltaE/deltaP. In these streaming potential measurements, hydrophilic nadolol and luteinizing hormone-releasing hormone, and lipophilic propranolol and Nafarelin were used as model drugs. As could be expected, the hydrophilic drugs did not change the slope. The more lipophilic propranolol and Nafarelin, instead, changed the slope. Propranolol changed the slope gradually from negative to positive when the concentration was increased from 1 to 10 mM. With Nafarelin, a straight line with a slope of about 0 was obtained at pH 7.3 and an ascending curve at pH 4.2. These results indicate that the negative charges on the pore walls of human skin are blocked by adsorption of the lipophilic cations. The adsorption of lipophilic cations in the skin alters the permselectivity of the skin, which, in turn, may lead to the inhibition of electroosmotic flow across the skin during iontophoresis and to the shut down of transdermal drug permeation of higher molecular weight drugs.

Diffusion Chambers, Culture↗
PubMed2003

Influence of the presence of a gel in the water phase on the electrochemical transfer of ionic forms of beta-blockers across a large water 1,2-dichloroethane interface.

The transfer of ionic species of three beta-blockers (propranolol, sotalol and timolol) has been studied by cyclic voltammetry at a macroscopic water 1,2-dichloroethane (1,2-DCE) interface. The aqueous solution has been gellified in order to study the effect of the gel on the transport properties of the drugs. The gelling agent also stabilizes the interface overcoming mechanical instability. The standard potential and standard Gibbs energy of transfer across the interface, the partition coefficient and the diffusion coefficient of each drug were determined in the presence of a gelled interface. The diffusion coefficients were shifted relative to those obtained at normal water 1,2-DCE interfaces (free of gel).

Adrenergic beta-Antagonists↗
PubMed2003

Dissolution testing of acetylsalicylic acid by a channel flow method-correlation to USP basket and intrinsic dissolution methods.

A new modification of the channel flow dissolution method is introduced together with the theoretical basis to extract the solubility and mass transfer parameters from the dissolution experiments. Correlation of drug dissolution profiles in the channel flow apparatus was evaluated with respect to USP basket and intrinsic dissolution methods at pH 1.2 or 6.8. Acetylsalicylic acid (ASA) was studied as a pure drug substance and as three simple tablet compositions with microcrystalline cellulose (MCC) and/or lactose as excipients. The channel flow measurements of 100% ASA tablets correlated well with the results of intrinsic dissolution tests. In the channel flow method as well as in the USP basket method the release of ASA was fastest from the tablet compositions containing lactose, while the slowest dissolution rate was observed with the composition containing MCC as the only excipient. As presumed, the dissolution rate of the weak acid was decreased as the pH of the medium was lowered, which was clearly confirmed also by the three dissolution methods. MCC forms matrix tablets and in the USP basket method the dissolution profiles followed square root of time kinetics indicating that diffusion was the rate-controlling step of ASA dissolution. Also the channel flow results indicated that the dissolution of ASA was controlled by mass transfer. The swelling behaviour of the tablets is different in the channel flow method as compared to the basket method: only one tablet surface is exposed to the dissolution medium in the channel flow system. The contact between the tablet surface and the dissolution medium is more similar between the channel flow and intrinsic dissolution methods.

Algorithms↗
PubMed2002

Interfacial reactivity of monolayer-protected clusters studied by scanning electrochemical microscopy.

Solutions of monodisperse monolayer-protected clusters (MPCs) of gold can be used as multivalent redox mediators in electrochemical experiments due to their quantized double-layer charging properties. We demonstrate their use in scanning electrochemical microscopy (SECM) experiments wherein the species of interest (up to 2-electron reduction or 4-electron oxidation from the native charge-state of the MPCs) is generated at the tip electrode, providing a simple means to adjust the driving force of the electron transfer (ET). Approach curves to perfectly insulating (Teflon) and conducting (Pt) substrates are obtained. Subsequently, heterogeneous ET between MPCs in 1,2-dichloroethane and an aqueous redox couple (Ce(IV), Fe(CN)63-/4-, Ru(NH3)63+, and Ru(CN)64-) is probed with both feedback and potentiometric mode of SECM operation. Depending on the charge-state of the MPCs, they can accept/donate charge heterogeneously at the liquid-liquid interface. However, this reaction is very slow in contrast to ET involving MPCs at the metal-electrolyte interface.

Journal Article↗
PubMed2002

Disk-generation/ring-collection scanning electrochemical microscopy: theory and application.

The potential of ring-disk ultramicroelectrodes (RD UMEs) as probes for scanning electrochemical microscopy (SECM) was investigated both theoretically and experimentally. In particular, the disk-generation/ring-collection (DG/RC) mode of operation was considered. In this case, the interaction of two species with the substrate under investigation can be followed simultaneously from single tip current-distance measurement (approach curve) to the substrate. Theoretical approach curves for DG/RC were calculated by numerical methods. Such approach curves to both insulating and conducting substrates indicate a strong tip response dependence on the ring radius while the response was relatively insensitive to ring thickness and overall tip radius. The RD tip was characterized by fitting experimental approach curves recorded at insulating and conducting substrates to simulated curves for a given tip geometry. DG/RC SECM was then applied to investigate the partitioning of iodine across a liquid-liquid interface.

Journal Article↗