PubMed Health⌕ Search

Biomedical subjects

Kyu-Sung Jeong

Publications and source records attributed to Kyu-Sung Jeong.

11 recordsLinked to original sources
PubMed2005

Oligoindole-based foldamers with a helical conformation induced by chloride.

As a new type of foldamers, oligoindoles containing 4, 6, and 8 indole rings were synthesized, and their folding properties were characterized by a combination of 1H NMR techniques and UV/visible titration experiments. When chloride was added, the NH signals of the oligoindoles were downfield shifted as a result of hydrogen-bond formation, and the aromatic signals were upfield shifted by stacking between two indoles. Moreover, the ROESY experiment provided definitive NOE evidence for the helical stacking in the presence of chloride. Finally, the UV/visible titration experiments demonstrated that the oligoindoles formed 1:1 complexes with chloride, and the association constants greatly increased with increasing the number of the indole NHs. These observations are all consistent with the fact that oligoindoles adopt a helical conformation when complexed with chloride by hydrogen-bonding interactions.

Journal Article↗
PubMed2004

Reversible control of assembly and disassembly of interlocked supermolecules.

Two kinds of interlocked supramolecular complexes that display stimulus-responsive assembly and disassembly have been described. One is a pseudorotaxane driven by hydrogen-bonding interactions between rings 2a and 2b and rods 1a and 1b. The rods contain a binding site for the ring as well as a stimulus-responsive diazo group, both of which are conformationally constrained in parallel by connecting them to a rigid xanthene skeleton. The trans isomer of 1a bearing a rigid binding site cannot form the pseudorotaxanes with the rings 2a and 2b because the neighboring diazophenyl group sterically shields the binding site. However, when trans-1a was converted to the corresponding cis-1a by UV light, the pseudorotaxanes are immediately formed with association constants of 70 +/- 10 M(-1) and (1.1 +/- 0.1) x 10(3) M(-1) for 2a and 2b, respectively, in CDCl3 at 24 +/- 1 degrees C. The pseudorotaxanes are completely disassembled into their molecular component when heated at 80-85 degrees C for 20 min. The assembly and disassembly processes can be reversibly cycled by repeating irradiation and heating alternatively. In the case of the rod 1b that possesses a flexible binding site, both cis and trans isomers can form the corresponding pseudorotaxanes with association constants of (2.0 +/- 0.3) x 10(2) M(-1) for 2a and trans-1b and of (7.4 +/- 0.5) x 10(2) M(-1) for 2a and cis-1b in CDCl3 at 24 +/- 1 degrees C. In this system, therefore, external stimuli can modulate the relative distribution of the pseudorotaxane and its components. Finally, the work was extended to the construction of a kinetically more stable molecular machine based on a rotaxane-like complex 10.11 between a metallocycle 11 and a dumbbell 10. In this system, the complex and its components showed separate sets of the signals, not the averaged, in 1H NMR spectroscopy as expected by the increased kinetic stability.

Journal Article↗
PubMed2004

Self-assembled metallocycles with two interactive binding domains.

Five metallocycles 1 a-e have been self-assembled from S-shaped bispyridyl ligands 2 a-e and a palladium complex, [Pd(dppp)(OTf)(2)] (dppp=1,3-bis(diphenylphosphanyl)propane), and have been characterized by elemental analysis and various spectroscopic methods including (1)H NMR spectroscopy and electrospray ionization (ESI) mass spectrometry. These metallocycles all are monocyclic compounds, but can fold to generate two binding domains bearing hydrogen-bonding sites based on pyridine-2,6-dicarboxamide units. The binding properties of the metallocycles with N,N,N',N'-tetramethylterephthalamide (G) have been probed by means of ESI mass spectrometry and (1)H NMR spectroscopy. The results both in the gas phase and in solution are consistent with the fact that the metallocycles accommodate two molecules of the guest G. Thus, the ESI mass spectra clearly show fragments corresponding to the 1:2 complexes in all cases. (1)H NMR studies on 1 a and G support the formation of a 1:2 complex in solution; the titration curves are nicely fitted to a 1:2 binding isotherm, but not to a 1:1 binding isotherm. In addition, a Job plot also suggests a 1:2 binding mode between 1 a and G, showing maximum complexation at approximately 0.33 mol fraction of the metallocycle 1 a in CDCl(3). The binding constants K(1) and K(2) are calculated to be 1600 and 1400 M(-1) (+/-10 %), respectively, at 25 degrees C in CDCl(3), indicative of positively cooperative binding. This positive cooperativity was confirmed by the Hill equation, affording a Hill coefficient of n = 1.6. Owing to insufficient solubility in CDCl(3), for comparison purposes the binding properties of the metallocycles 1 b-e were investigated in a more polar medium, 3 % CD(3)CN/CDCl(3). (1)H NMR titrations revealed that the metallocycles all bind two molecules of the guest G with Hill coefficients ranging from 1.4 to 1.8. This positive cooperativity may be attributed to a structural reorganization of the second binding cavity when the first guest binds to either one of the subcavities present in the metallocycles.

Hydrogen Bonding↗
PubMed2004

Self-assembly of interlocked supramolecular dendrimers.

Interlocked supramolecular dendrimers were spontaneously self-assembled from molecular components, metallocycles, and dumbbells bearing benzyl ether repeating units. Here, the metallocycles were in situ self-assembled from L-shaped ligands with dendritic branches, 2,3-dimethyl-2-butene and osmium tetraoxide. The supramolecular dendrimers were stabilized by hydrogen-bonding interactions between the pyridine-2,6-dicarboxamide unit in the metallocycle and the adipamide unit in the dumbbell.

Journal Article↗
PubMed2004

Efficient modulation of hydrogen-bonding interactions by remote substituents.

[structure: see text] A series of tetralactam macrocycles having different substituents were prepared, and their binding affinities for an adipamide guest were investigated in CDCl3 by 1H NMR titrations. The association constants strongly depend on the substituents, varying up to DeltaDeltaG = 3.4 kcal/mol; electron-donating substituents (OMe, NMe2) decrease the binding affinity, while electron-withdrawing groups (Cl, NO2) increase it. These large substituent effects have been rationalized by secondary repulsions and partial perturbations of intramolecular hydrogen bonds.

Journal Article↗
PubMed2003

m-Phenylene ethynylene sequences joined by imine linkages: dynamic covalent oligomers.

Imine metathesis between m-phenylene ethynylene oligomers of various lengths was performed in acetonitrile, a solvent in which oligomers containing eight or more repeat units adopt a compact helical conformation. The equilibrium constants and corresponding free energy change for the imine metathesis reactions were estimated. The results showed that the magnitude of equilibrium shifting measured by the free energy change for the formation of imine-containing oligomers increases linearly below a critical product chain length and grows asymptotically above it. The linear region is ascribed to the constant increase in contact area between monomer units of adjacent helical turns as the product chain grows to the 12-mer. Once the ligation product is 12 units in length, full contact is made between adjacent helical turns. On the other hand, for imine metathesis between oligomers leading to products having more than 12 units, the driving force is the difference between the folding energy of products and that of reactants. The additional stabilizing energy is roughly constant, regardless of the chain length, since the contact area between adjacent helical turns is unchanged. Consistent with the notion that the imine bond only minimally destabilizes the helical conformation, the position of the imine bond in the ligation product has been observed to have no significant effect on the folding stability. The magnitudes of equilibrium shifting are similar for ligation products of the same length but having the imine at various positions along the sequence. This suggests that the imine bond is compatible with the m-phenylene ethynylene backbone, regardless of the position in the sequence. Imine metathesis of m-phenylene ethynylene oligomers could allow a quick access to an unbiased, dynamic library of oligomer sequences joined by imine linkages.

Journal Article↗
PubMed2003

Synthesis and characterization of a metallocycle-based molecular shuttle.

Kinetically stable metallocycle-based molecular shuttles of [2]rotaxanes 4a and 4b, along with [3]rotaxanes 5a and 5b, have been prepared using the rhenium(I)-bridged metallocycle 2 and the dumbbell components containing two stations, 3a and 3b. The rotaxanes were self-assembled by hydrogen bonding interactions upon heating a Cl(2)CHCHCl(2) solution containing their components at 70 degrees C. Each rotaxane was isolated in pure form by silica gel chromatography under ordinary laboratory conditions and fully characterized by elemental analysis and various spectroscopic methods. The (1)H NMR signals for the amide NH and the methylene -(CH(2))(4)- of the station were considerably changed when occupied by the metallocycle. In [2]rotaxane 4b, which has a larger naphthyl spacer, the occupied and unoccupied stations gave widely separated signals in the (1)H NMR spectroscopy at room temperature, but averaged signals of two stations were observed in [2]rotaxane 4a, which has a smaller phenyl spacer. This is attributed to the shuttling of the metallocycle between two stations. The coalescence temperature experiment gave a shuttling rate of approximately 670 s(-)(1) at 19 degrees C in CDCl(3), corresponding to an activation free energy (DeltaG()) of 13.3 kcal/mol. With respect to the relative position of the chloride in the rhenium(I) center, two diastereomers are possible in the [2]rotaxane and three diastereomers are possible in the [3]rotaxane. In fact, the rotaxanes exist as diastereomeric mixtures in nearly equal amounts of all possible diastereomers on the basis of the amide NH signals of the station in the (1)H NMR spectroscopy.

Journal Article↗
PubMed2003

Quantitative comparison of kinetic stabilities of metallomacrocycle-based rotaxanes.

Four mononuclear metallomacrocycles with identical cavities but different transition metals (Os(VI), Pd(II), Pt(II), and Re(I)) were prepared. With these metallomacrocycles, the corresponding rotaxanes 2-Os, 2-Pd, 2-Pt, and 2-Re were self-assembled by hydrogen-bonding interactions. The kinetic stabilities of the rotaxanes were determined quantitatively and compared with each other by (1)H NMR spectroscopic techniques, including two-dimensional exchange spectroscopy (2D-EXSY) experiments. The activation free energies (DeltaG( not equal )) for the exchange between the rotaxanes 2-Os, 2-Pd and 2-Pt and their free components were determined to be 15.5, 16.0, and 16.4 kcal mol(-1), respectively. These magnitudes imply that the rotaxanes 2-Os, 2-Pd and 2-Pt are kinetically labile at room temperature and exist only as equilibrium mixtures with free components in solution. In contrast, the rotaxane 2-Re is kinetically stable enough to be isolated in pure form by silica gel chromatography under ordinary laboratory conditions. However, at higher temperatures (>60 degrees C) 2-Re was slowly disassembled into its components until the equilibrium was established. The rate constants were measured at three different temperatures, and the Eyring plot yielded the activation enthalpy DeltaH(not equal)=35 kcal mol(-1) and the activation entropy DeltaS(not equal)=27 eu for the disassembly of the rotaxane 2-Re in Cl(2)CDCDCl(2). These thermodynamic parameters gave the activation free energy DeltaG(not equal)(off)=27.1 kcal mol(-1) at 25 degrees C. Consequently, 2-Re is one example of a novel metallomacrocycle-based rotaxane that contains a coordination bond with enough strength to allow both for isolation in pure form around room temperature and for self-assembly at higher temperatures.

Journal Article↗