Label-free biosensing with hydrogel microlenses.
Explore the source record for details and available documents.
Biocompatible Materials↗
Biomedical subjects
L Andrew Lyon
Publications and source records attributed to L Andrew Lyon.
1H NMR investigation of thermally triggered insulin release from poly(N-isopropylacrylamide) microgels.
We describe investigations of insulin release from thermoresponsive microgels using variable temperature (1)H NMR. Microgel particles composed of poly(N-isopropylacrylamide) were loaded with the peptide via a swelling technique, and this method was compared to simple equilibrium partitioning. Variable temperature (1)H NMR studies suggest that the swelling loading method results in enhanced entrapment of the peptide versus equilibrium partitioning. A centrifugation-loading assay supports this finding. Pseudo-temperature jump (1)H NMR measurements suggest that the insulin release rate is partially decoupled from microgel collapse. These types of direct release investigations could prove to be useful methods in the future design of controlled macromolecule drug delivery devices.
Acetone↗
Soft nanotechnology with soft nanoparticles.
The last decade of research in the physical sciences has seen a dramatic increase in the study of nanoscale materials. Today, "nanoscience" has emerged as a multidisciplinary effort, wherein obtaining a fundamental understanding of the optical, electrical, magnetic, and mechanical properties of nanostructures promises to deliver the next generation of functional materials for a wide range of applications. While this range of efforts is extremely broad, much of the work has focused on "hard" materials, such as Buckyballs, carbon nanotubes, metals, semiconductors, and organic or inorganic dielectrics. Meanwhile, the soft materials of current interest typically include conducting or emissive polymers for "plastic electronics" applications. Despite the continued interest in these established areas of nanoscience, new classes of soft nanomaterials are being developed from more traditional polymeric constructs. Specifically, nanostructured hydrogels are emerging as a promising group of materials for multiple biotechnology applications as the need for advanced materials in the post-genomic era grows. This review will present some of the recent advances in the marriage between water-swellable networks and nanoscience.
Journal Article↗
Bioresponsive hydrogel microlenses.
We report investigations of bioresponsive hydrogel microlenses as a new protein detection technology. Stimuli-responsive poly(N-isopropylacrylamide-co-acrylic acid) (pNIPAm-co-AAc) microgels have been synthesized via free-radical precipitation polymerization. These hydrogel microparticles were then functionalized with biotin via EDC coupling. Hydrogel microlenses were prepared from the particles via Coulombic assembly onto a silane-modified glass substrate. Arrays containing both pNIPAm-co-AAc microgels (as an internal control) and biotinylated pNIPAm-co-AAc microgels were then used to detect multivalent binding of both avidin and polyclonal anti-biotin. Protein binding was determined by monitoring the optical properties of the microlenses using a brightfield optical microscopy technique. The microlens method is shown to be very specific for the target protein, with no detectable interference from nonspecific protein binding. Finally, the reversibility of the hydrogel microlens assay has been studied in the case of anti-biotin to determine the potential application of the microlens assay technology in a displacement-type assay. These results suggest that the microlens method may be an appropriate one for label-free detection of proteins or small molecules via displacement of tethered protein--ligand pairs.
Acrylamides↗
Photoswitchable microlens arrays.
Explore the source record for details and available documents.
Journal Article↗
Ligand-functionalized core/shell microgels with permselective shells.
Explore the source record for details and available documents.
Journal Article↗
Folate-mediated cell targeting and cytotoxicity using thermoresponsive microgels.
We describe the design of fluorescent, thermoresponsive microgels surface-functionalized with folic acid. Incubation of these particles with KB cells grown in folate-free medium results in efficient endocytosis of the particles via a receptor-mediated pathway. Laser scanning confocal microscopy and flow cytometry show efficient uptake of folate-modified particles over cationic control particles. Staining of the cells with Lysotracker red, followed by confocal imaging, shows anticorrelation between the particle and endosome fluorescence, which is taken as evidence of particle escape from the endosomes to the cytosol. Finally, the strong dependence of particle swelling on temperature was used to induce particle collapse and aggregation following uptake, which causes significant cytotoxicity. Thus, we have developed polymeric nanoparticles that may display antitumor activity, as they effectively target cancer cells and undergo endosomal escape to the cytosol, and they can then be triggered to cause cell death.
Carrier Proteins↗
Hydrogel microparticles as dynamically tunable microlenses.
Tunable micro-optical elements were prepared by aqueous free-radical polymerization and electrostatic self-assembly techniques. Stimuli-responsive poly(N-isopropylacrylamide-co-acrylic acid) (pNIPAm-AAc) microgels were used as lenses to generate dynamically tunable optical elements. By using optical microscopy to investigate the micrometer-scale dynamics of the self-assembled microlenses, we demonstrate focal length tuning through modulation of the solution pH and/or temperature.
Journal Article↗
Microlens formation in microgel/gold colloid composite materials via photothermal patterning.
We report on the nature of photothermally patterned regions inside self-assembled hydrogel nanoparticle materials containing coassembled colloidal Au. These composite materials are prepared from approximately 226-nm diameter particles composed of the environmentally responsive polymer, poly(N-isopropylacrylamide) (pNIPAm). Upon centrifugation to achieve a proper volume fraction, these close-packed assemblies display a sharp Bragg diffraction peak in the midvisible region of the spectrum and can be reversibly converted into a nondiffracting glassy material as the temperature is raised above the characteristic phase transition temperature of the polymer. The addition of 16-nm colloidal Au prior to centrifugation allows the homogeneous distribution of metal nanoparticles throughout the close-packed material. Localized heating is then possible upon excitation of the Au plasmon absorption with a frequency doubled Nd:YAG laser (lambda = 532 nm). Such localized heating events lead to patterned regions of ordered crystalline phases inside of bulk glassy phases. We illustrate that the nature of the locally patterned area results in the formation of a microlens due to density/refractive index gradient in the patterned crystalline region. The Gaussian power distribution of the incident beam is thought to be a contributing factor in the microlens formation. Microlens formation is shown by observing interference patterns similar to Newton's rings, which change over time as the region is formed. A true hallmark of the lens is also demonstrated by focusing an image through the patterned structure.
Journal Article↗
Photothermal patterning of microgel/gold nanoparticle composite colloidal crystals.
We present a new method for laser direct writing in self-assembled hydrogel microparticle colloidal crystals via photothermal excitation of co-assembled colloidal Au particles. Close-packed colloidal crystals are assembled from approximately 224 nm diameter, thermoresponsive, poly-N-isopropylacrylamide hydrogel microparticles (microgels); these crystals display sharp Bragg diffraction peaks in the mid-visible region of the spectrum due to the periodic dielectric function of the assembly. Raising the temperature of the crystal above the characteristic volume phase transition temperature of the microgel particles results in a reversible melting of the crystalline material due to the particle-based deswelling event. This transition can be used either to anneal defects from the crystalline material or to controllably and reversibly convert the assembly from the colored, crystalline state to a nondiffracting glassy material. Crystal-to-glass transitions are similarly accomplished via photothermal excitation when 16 nm diameter colloidal Au particles are co-assembled with the responsive microgels. Excitation of the colloidal Au plasmon absorption with a frequency doubled Nd:YAG laser (lambda = 532 nm) results in optically directed conversion of either glasses to crystals or crystals to glasses, depending on the initial state of the assembly and the illumination time. These results represent a fundamentally new method for the patterning of self-assembled photonic materials.
Journal Article↗
In-lens cryo-high resolution scanning electron microscopy: methodologies for molecular imaging of self-assembled organic hydrogels.
The micro- and nanoarchitectures of water-swollen hydrogels were routinely analyzed in three dimensions at very high resolution by two cryopreparation methods that provide stable low-temperature specimens for in-lens high magnification recordings. Gemini surfactants (gS), poly-N-isopropylacrylamides (p-NIP Am), and elastin-mimetic di- (db-E) and triblock (tb-E) copolymer proteins that form hydrogels have been routinely analyzed to the sub-10-nm level in a single day. After they were quench or high pressure frozen, samples in bulk planchets were subsequently chromium coated and observed at low temperature in an in-lens field emission SEM. Pre-equilibrated planchets (4-40 degrees C) that hold 5-10 microl of hydrogel facilitate dynamic morphological studies above and below their transition temperatures. Rapidly frozen samples were fractured under liquid nitrogen, low-temperature metal coated, and observed in-lens to assess the dispersion characteristics of micelles and fragile colloidal assemblies within bulk frozen water. Utilizing the same planchet freezing system, the cryoetch-HRSEM technique removed bulk frozen water from the hydrogel matrix by low-temperature, high-vacuum sublimation. The remaining frozen solid-state sample faithfully represented the hydrogel matrix. Cryo- and cryoetch-HRSEM provided vast vistas of hydrogels at low and intermediate magnifications whereas high magnification recordings and anaglyphs (stereo images) provided a three-dimensional prospective and measurements on a molecular level.
Journal Article↗
Doxorubicin uptake and release from microgel thin films.
We report investigations on the thermally regulated uptake and release of the chemotherapeutic drug doxorubicin from microgel thin films. A spin coating, layer-by-layer (scLbL) assembly approach was used to prepare thin films composed of thermoresponsive poly(N-isopropylacrylamide-co-acrylic acid) (pNIPAm-AAc) microgels by alternatively exposing a 3-aminopropyltrimethoxysilane (APTMS) functionalized glass substrate to polyanionic pNIPAm-AAc microgels and polycationic poly(allylamine hydrochloride) (PAH). Using this method, 10, 20, and 30 microgel layer films were constructed with uniform layer buildup, as confirmed by quartz crystal microgravimetry (QCM). The films were subsequently loaded with doxorubicin by cycling the temperature of the film in an aqueous doxorubicin solution between 25 and 50 degrees C. Release characteristics were then examined using UV-vis spectroscopy, which revealed temperature-dependent release properties.
Doxorubicin↗
Thermally modulated insulin release from microgel thin films.
We describe investigations of thermally triggered insulin release from poly(N-isopropylacrylamide-co-acrylic acid) microgel thin films prepared by layer-by-layer (LbL) polyelectrolyte assembly. The thermoresponsivity of these films was confirmed using light scattering techniques. Simultaneous monitoring of film collapse and insulin release kinetics shows that deswelling of the films is partially decoupled from macromolecule release and that release is mainly governed by partitioning effects. We hypothesize, however, that film thermoresponsivity plays an important role in that subjection to many thermal cycles enables the embedded peptide to solubilize and subsequently partition through film layers. Direct pulsatile and extended release studies confirm the capability of these films to release bursts of insulin over many cycles, and confirm that the magnitude of the release can be controlled based on film thickness. These insulin-impregnated films are extremely stable with the potential to release constant pulses of peptide for more than 1 month at a time.
Gels↗
Phase transition behavior, protein adsorption, and cell adhesion resistance of poly(ethylene glycol) cross-linked microgel particles.
Thermoresponsive poly(N-isopropylacrylamide) (pNIPAm) microgel particles cross-linked with various concentrations of PEG diacrylates of 3 different PEG chain lengths were synthesized via free-radical precipitation polymerization in order to investigate the phase transition and protein adsorption behavior as the hydrophilicity of the network is increased. Photon correlation spectroscopy (PCS) reveals that, as the concentration of PEG cross-linker incorporated into the particles is increased, an increase in the temperature and breadth of the phase transition occurs. Qualitative differences in particle density using isopycnic centrifugation confirm that higher PEG concentrations result in denser networks. The efficient incorporation of PEG cross-linker was confirmed with (1)H NMR, and variable temperature NMR studies suggest that, in the deswollen state, the longer PEG cross-links protrude from the dense globular network. This behavior apparently manifests itself as a decrease in nonspecific protein adsorption with increasing PEG length and content. Furthermore, when electrostatically attached to a glass surface, the particles containing the longer chain lengths exhibited enhanced nonfouling behavior and were resistant to cell adhesion in serum-containing media. The excellent performance of these particulate films and the simplicity with which they are assembled suggests that they may be applicable in a wide range of applications where nonfouling coatings are required.
Adsorption↗