PubMed Health⌕ Search

Biomedical subjects

L Baldassarri

Publications and source records attributed to L Baldassarri.

At least 19 recordsLinked to original sources

Clonality among Enterococcus faecium clinical isolates.

In the course of a survey to determine the epidemiology of enterococcal infections in Italy, a sudden increment, in a 1-year time, was noted in the number of glycopeptide resistant Enterococcus faecium isolated from different wards of the University Hospital in Rome, Italy. The isolates were characterized for clonal relatedness by comparing SmaI gel electropherotypes, presence of vancomycin-resistance genes, and expression of virulence factors. PFGE identified in a single pulsed type all the glycopeptide-resistant isolates but one. Resistance to high levels of aminoglycosides was expressed by these same isolates, which also included a majority of non biofilm-forming strains. Two esp gene-carrying strains were also identified in different PFGE types. Data indicates that a specific clone acquired, in the clinical setting, the genetic determinant for glycopeptide resistance, thus improving environmental adaptation and favoring its persistence and spread.

Drug Resistance, Multiple, Bacterial↗

Analysis of virulence factors in cases of enterococcal endocarditis.

Eleven isolates of Enterococcus faecalis causing endocarditis were screened for possible virulence factors with PCR and phenotypic assays. The gene coding for the enterococcal surface protein (esp) was detected in one isolate only, and haemolysin was produced by two isolates. Aggregation substance, biofilm formation and gelatinase were present in seven, nine and eight isolates, respectively. Predisposing factors, particularly hospitalisation and multiple antibiotic therapy, appeared to be more relevant to the development of enterococcal endocarditis following bloodstream infections than the pattern of virulence factors.

Adult↗

Antibiotic resistance and genotypic characterization by PFGE of clinical and environmental isolates of enterococci.

Fifty-four Enterococcus faecalis and 20 Enterococcus faecium isolates from clinical and non-human sources in Rome, Italy, were characterized by antibiotic resistance and pulsed field gel electrophoresis (PFGE). Resistance to vancomycin, teicoplanin, ampicillin, and ciprofloxacin was more frequent in E. faecium than in E. faecalis, whereas high-level resistance to aminoglycoside was found primarily in E. faecalis. Multi-resistance was found primarily among clinical isolates, but was also observed among environmental isolates. Common genotypes shared among clinical and environmental isolates were observed, however, the majority of isolates occurred as unique, source-specific clones. Several PFGE types were associated with shared features in their antibiotic resistance patterns; evidences of clonal spread between and within wards were also noted. This is the first report indicating clonal relatedness between human and environmental enterococci isolated in Italy.

Anti-Bacterial Agents↗

Effect of iron limitation on slime production by Staphylococcus aureus.

The aim of this study was to examine the effect of growth conditions on slime production by Staphylococcus aureus clinical isolates. The addition of glucose to the medium enhanced slime production in the majority of Staphylococcus aureus isolates cultured from infections associated with orthopaedic prostheses. Iron limitation also stimulated this ability even in the absence of the additional carbohydrate source. Staphylococcus aureus isolates were classified as Group 1 [strains producing slime only in trypticase soy broth supplemented with 1% glucose (TSBG) or in iron-limited trypticase soy broth (TSB/Fe-)]; Group 2 (slime + only in TSB/Fe-); or Group 3 (slime+ only in TSBG). Seven repeatedly slime-negative strains were stimulated to produce slime by subpassaging in iron-limited medium. Low iron levels, usually found in vivo, could stimulate slime production by Staphylococcus aureus and support chronic infections associated with orthopaedic prostheses.

Bacterial Proteins↗

Enterococcus spp. produces slime and survives in rat peritoneal macrophages.

Enterococcal clinical isolates were investigated for the ability to form biofilm on inert surfaces, as a measure of slime production, in an attempt to find new possible virulence factors for these microorganisms. This property was commonly found among Enterococcus faecalis. Also E. faecium isolates were able to form biofilm, although to a lesser extent; for this species, however, biofilm formation seemed more frequently associated with isolates from infection rather than with environmental strains or isolates from healthy individuals. Biofilm formation was strongly affected by the presence of an additional carbohydrate source in the medium, or by iron deprivation, indicating a role of slime for survival in stressful conditions. Slime-producing E. faecalis were able to survive inside peritoneal macrophages for extended periods compared to slime-negative strains or to slime-positive bacteria grown in conditions depressing slime production. In particular, slime-producing and slime-negative cells showed a decrease of 1 and 2 log units, respectively, at 1 h after infection; slime-negative cells were then rapidly killed, with clearance of bacterial cells at 24 h. Slime-producing bacteria persisted up to 48 h, which was the last time point examined, as after that time viability of both infected and non-infected macrophages started to decline. Scanning electron microscopy observations showed the presence of abundant amorphous extracellular material, of possible polysaccharide nature, embedding bacterial cells to form a multilayered biofilm. Even in conditions not supporting biofilm formation, bacterial cells appeared capsulated, suggesting that capsule and slime might represent different structures. Genes belonging to the epa locus or to a putative icaA homolog did not seem to be involved in synthesis and export of slime.

Animals↗

Phenotypic and genotypic markers of Staphylococcus epidermidis virulence.

OBJECTIVES: To analyze Staphylococcus epidermidis strains, previously tested for their virulence in a mouse model of subcutaneous infection, for various phenotypic traits (biofilm density, extracellular polysaccharide, slime-associated antigen (SAA)) and for the presence of the ica gene cluster, to determine which of these phenotypic and genotypic methods best correlates with virulence in the mouse model. METHODS: The quantitative biofilm assay was performed on 10 strains of S. epidermidis, comprising (1) RP62A (ATCC 35984), (2) the strongest and weakest biofilm producers in our collection, (3) a pair of phenotypic variants, and (4) a strain whose biofilm density was enhanced in iron-limited media. Biofilm density was measured after growth at 37 degrees C and at ambient temperature, in trypticase soy broth (TSB) with and without glucose supplementation and using both chemical and heat fixation. Strains were assayed for SAA using a double immunodiffusion method. Extracellular polysaccharide was detected by transmission electron microscopy (TEM). A 546-base-pair segment of the ica gene cluster was amplified by PCR. RESULTS: Biofilm formation in TSB, glucose-enriched TSB, extracellular polysaccharide (observed by TEM), expression of SAA and presence of the ica gene predicted virulence of nine, nine, nine, eight and eight of 10 strains, respectively. The phenotypic expression of biofilm and related properties was medium and temperature dependent. We encountered one ica-positive strain that failed to express biofilm in standard TSB at 37 degrees C, but was virulent in a mouse model, and another strain that lacked ica, produced biofilm and was virulent in the model. CONCLUSIONS: Mouse virulence in our model can be predicted by any of the phenotypic or genotypic methods examined for > or = 80% of strains. Medium and incubation conditions affect the expression of phenotypic markers by some strains. For the remaining strains, possible reasons for inconsistencies between the presence of the ica gene, phenotypic markers and mouse virulence include (1) dependence of biofilm on genes other than ica, (2) sequence differences in ica, (3) dependence of biofilm expression in vivo on strain characteristics and media used to prepare inocula for in vivo studies.

Animals↗

Activities of bismuth thiols against staphylococci and staphylococcal biofilms.

Indwelling medical devices are associated with infectious complications. Incorporating antimicrobials into indwelling materials may reduce bacterial colonization. Bismuth thiols are antibiofilm agents with up to 1,000-fold-greater antibacterial activity than other bismuth salts. Staphylococci are particularly sensitive, as determined by agar diffusion and broth dilution susceptibility testing. Bismuth-ethanedithiol inhibited 10 methicillin-resistant Staphylococcus epidermidis strains at 0.9 to 1.8, Staphylococcus aureus ATCC 25923 at 2.4, and S. epidermidis ATCC 12228 at 0.1 microM Bi(3+). Antiseptic-resistant S. aureus was sensitive to bismuth-2-3-dimercaptopropanol (BisBAL) at < or = 7 microM Bi(3+). Hydrogel-coated polyurethane rods soaked in BisBAL inhibited S. epidermidis for 39 days (inhibitory zone diameter in agar, > or = 30 mm for > 25 days). Slime from 16 slime-producing S. epidermidis strains was inhibited significantly by bismuth-3,4-dimercaptotoluene (BisTOL), but not by AgNO3, at subinhibitory concentrations. In conclusion, bismuth-thiols are bacteriostatic and bactericidal against staphylococci, including resistant organisms, but are also inhibitors of slime at subinhibitory concentrations. At subinhibitory concentrations, BisTOL may be useful in preventing the colonization and infection of indwelling intravascular lines, since staphylococci are important pathogens in this setting.

Anti-Bacterial Agents↗

Presence of icaA and icaD genes and slime production in a collection of staphylococcal strains from catheter-associated infections.

Both Staphylococcus epidermidis and Staphylococcus aureus are important causes of infections associated with catheters and other medical devices. It has recently been shown that not only S. epidermidis but also S. aureus can produce slime and carries the ica operon responsible for slime production. In the operon, coexpression of icaA and icaD is required for full slime synthesis. In this study, the presence of icaA and icaD was determined in a collection of 91 staphylococcal (68 S. epidermidis and 23 S. aureus) strains from intravenous catheter-associated infections, in 10 strains from the skin and mucosa of healthy volunteers, and in two reference strains by a PCR method. Slime-forming ability was tested on Congo red agar plates; 49% of S. epidermidis strains from catheters and, surprisingly, 61% of S. aureus strains were icaA and icaD positive and slime forming. All the saprophytic strains turned out to be negative for both icaA and icaD and also non-slime forming. Two S. aureus and one S. epidermidis strain from catheters, detected as icaA and icaD positive by PCR analysis and as slime forming (black colonies) at 24 h on Congo red agar, at 48 h exhibited tiny red spikes at the center of black colonies. The onset of these variants could not be ascribed to a mutagenic potential of Congo red, which, in the Ames test, was devoid of mutagenicity. PCR analysis showed that these red variants were negative for both icaA and icaD and even lacking the entire icaADBC operon. The data reported indicate an important role of ica genes as a virulence marker in staphylococcal infections from intravenous catheters.

Biofilms↗

Adhesion of a Staphylococcus aureus strain to biomaterials does not select methicillin-resistant mutants.

Bacterial adhesion to polymethylmethacrylate and to silicon elastomer, materials frequently used in clinical applications, has been investigated to assess whether adhesion selects methicillin-resistant mutants in the bacterial population in contact with the materials. The methicillin susceptibility of a susceptible Staphylococcus aureus (ATCC 25923) was measured by a modification of plate antibiogram Kirby-Bauer method, which allows optimised detection of small variations in antibiotic susceptibility. In both adherent and non-adherent bacterial subpopulations, the presence of mecA gene, which encodes for the protein PBP 2a responsible for methicillin resistance was searched for by Polymerase Chain Reaction (PCR). The contact with the two polymers did not induce in the bacteria population any phenotypic increase in methicillin resistance, or the selection of mutants carrying the mecA gene.

Bacterial Adhesion↗

Alteration of organized structure of biofilm formed by Staphylococcus epidermidis on soft contact lenses.

The effect of a nonsteroidal antiinflammatory drug commercially available in eye drop form (sodium diclofenac) was assayed for its ability to affect biofilms formed by clinical Staphylococcus epidermidis isolates. Biofilms produced by one strain positive for a slime-associated antigen, suggested to be expressed by more virulent strains, was not affected by sodium diclofenac treatment. On the other hand, biofilm produced by the slime-positive, antigen-negative strain showed dramatic alterations already after short treatments with sodium diclofenac as reported for salicylate and other nonsteroidal drugs. Such results suggest further investigation of the possible use of sodium diclofenac drops in the treatment of ophthalmic infections in soft contact lens wearers.

Anti-Bacterial Agents↗

Presence and expression of collagen adhesin gene (cna) and slime production in Staphylococcus aureus strains from orthopaedic prosthesis infections.

Prosthesis-associated infections still represent one of the most serious complications in the clinical use of biomaterials. The most frequent causes are Staphylococcus aureus and Staphylococcus epidermidis. Several studies have been devoted to identify adhesion mechanisms for these bacteria. Slime in particular has been extensively investigated. Recently, in Staphylococcus aureus species, considerable attention has been given to the host protein receptors that have been shown in in vitro assays to serve as substrates for bacterial adhesion. Collagen-rich tissues, as bone and cartilage, that are the preferential sites of staphylococcal infections, are also the tissues that harbour orthopaedic implants. These can be easily coated in vivo by collagen and thus become prone to adhesion of Staphylococci strains which carry the collagen adhesin gene (cna). In this study the frequency of cna was determined within a collection of 35 Staphylococcus aureus strains from orthopaedic prosthesis infections by a PCR method. Also the collagen-binding ability and slime forming capacity was evaluated. 29% of the strains were cna-positive and also able to bind collagen in vitro. 83% of the strains were slime forming. The results indicate that in the examined bacterial population slime-positive strains predominate over the cna-positive strains, with a striking association of the two adhesion mechanisms in cna-positive strains.

Adhesins, Bacterial↗

Slime production and expression of the slime-associated antigen by staphylococcal clinical isolates.

The ability to produce slime and to express a slime-associated antigen was examined in a collection of staphylococcal clinical isolates. Slime-producing strains were found among coagulase-negative staphylococci in percentages comparable to those reported in other studies; surprisingly, a high percentage of Staphylococcus aureus strains also were able to produce this extracellular material. In the latter case, this ability was strongly dependent on the presence of an additional carbohydrate source in the growth medium. Expression of the slime-associated antigen appeared to be species specific and confined to the Staphylococcus epidermidis sensu stricto isolates; its strong association with the ability of these strains to produce thicker biofilms indicated slime-associated antigen as a possible virulence marker for S. epidermidis.

Antigens, Bacterial↗

Detection of fibronectin-binding protein genes in staphylococcal strains from peri-prosthesis infections.

Several studies have been devoted to identify the adhesion mechanisms of Staphylococcus aureus and Staphylococcus epidermidis, which are the most frequent causes of prosthesis-associated infections. Recently, in particular for Staphylococcus aureus, considerable attention has been given to the host protein receptors as mediators for bacterial adherence. Fibronectin, in important matrix protein, seems to be a major ligand for bacterial adherence in the early stages of infection. To determine the importance of the fibronectin adhesin as virulence factor in Staphylococcus-induced prosthesis infection, a simple and reliable method using a polymerase chain reaction (PCR) was devised to identify fibronectin adhesin genes (fnbA and fnbB). Results obtained by this method were in accordance with those obtained by the in vitro phenotypic characterization of binding ability to fibronectin of Staphylococcus strains.

Adhesins, Bacterial↗

Slime production by Staphylococci isolated from prosthesis-associated infections.

Clinical isolates of Staphylococcus epidermidis are frequently referred to produce a biofilm, known as slime, involved in adherence to medical devices and in resistance to host defences. A high frequency of slime producing Staphylococcus aureus strains was never reported, at least in the case of human isolates. In the present study the production of slime by clinical isolates of S. aureus and S. epidermidis from catheter associated infections and from post-surgical infections was studied by a sensitive method based on culturing the isolates on Congo red agar. The study demonstrates that in nosocomial surgical infections, considered separately from catheter-associated infections, S. aureus emerges as a more prevalent etiologic agent than S. epidermidis, with a proportion of slime producing strains markedly high.

Biofilms↗

A polymerase chain reaction (PCR) method for the identification of collagen adhesin gene (CNA) in Staphylococcus-induced prosthesis infections.

Staphylococci are well-recognized pathogens of foreign body-associated infections. The pathogenesis of such infections involves an initial step of contact between the colonizing bacterium and the biomaterial, with subsequent colony formation. Several studies have been devoted to identify adhesion mechanisms for these bacteria. Slime in particular has been extensively investigated. Recently, considerable attention has been given to the host protein receptors that have been shown in in vitro assays to serve as substrates for bacterial adherence. To determine the importance of the collagen adhesin as virulence factor in Staphylococcus-induced prosthesis infection, a simple and reliable method using a polymerase chain reaction (PCR) was devised to identify collagen adhesin gene (cna). By using lysates of ten strains from orthopedic prostheses (5 Staphylococcus aureus and 5 Staphylococcus epidermidis) and two 20-oligonucleotides as primers, a 192-bp region of the cna gene was amplified by PCR and detected by agarose gel electrophoresis. Results obtained by this method were in accordance with those obtained by the in vitro phenotypic characterization of binding ability to collagen of Staphylococcus strains.

Adhesins, Bacterial↗

Expression of slime interferes with in vitro detection of host protein receptors of Staphylococcus epidermidis.

We hypothesized that slime may mask bacterial molecules important in the attachment of Staphylococcus epidermidis to inanimate surfaces. In support of this hypothesis, we found that slime-negative strains attached significantly better to fibrinogen or fibronectin than the parent strains and exhibited greater surface hydrophobicity. Comparable results were obtained with 53 clinical isolates.

Antigens, Bacterial↗