PubMed Health⌕ Search

Biomedical subjects

L Bocquet

Publications and source records attributed to L Bocquet.

At least 19 recordsLinked to original sources

Slippage of water past superhydrophobic carbon nanotube forests in microchannels.

We present in this Letter an experimental characterization of liquid flow slippage over superhydrophobic surfaces made of carbon nanotube forests, incorporated in microchannels. We make use of a particle image velocimetry technique to achieve the submicrometric resolution on the flow profile necessary for accurate measurement of the surface hydrodynamic properties. We demonstrate boundary slippage on the Cassie superhydrophobic state, associated with slip lengths of a few microns, while a vanishing slip length is found in the Wenzel state when the liquid impregnates the surface. Varying the lateral roughness scale L of our carbon nanotube forest-based superhydrophobic surfaces, we demonstrate that the slip length varies linearly with L in line with theoretical predictions for slippage on patterned surfaces.

Journal Article↗

Probing the nanohydrodynamics at liquid-solid interfaces using thermal motion.

We report on a new method to characterize nanohydrodynamic properties at the liquid-solid interface relying solely on the measurement of the thermal motion of confined colloids. This equilibrium measurement of surface properties--equivalent in spirit to the passive microrheology technique used for bulk properties--is able to achieve nanometric resolution on the slip length measurement. Exploring the "zero shear rate" limit, it rules out shear rate threshold to slip effects and extends the range over which slip lengths are shown to be flow independent. Avoiding the nucleation of gas pockets (nanobubbles) through external forcing, it validates the theoretical picture for intrinsic liquid-solid interfaces, reporting nanometric slip lengths (b=18+/-5 nm) only in nonwetting situations, opening the route to quantitative study on more complex surfaces with combined effects of nonwettability and roughness.

Journal Article↗

Nucleation in hydrophobic cylindrical pores: a lattice model.

We consider the nucleation process associated with capillary condensation of a vapor in a hydrophobic cylindrical pore (capillary evaporation). The liquid-vapor transition is described within the framework of a simple lattice model. The phase properties are characterized both at the mean-field level and with Monte Carlo simulations. The nucleation process for the liquid to vapor transition is then specifically considered. Using umbrella sampling techniques, we show that nucleation occurs through the condensation of an asymmetric vapor bubble at the pore surface. Even for highly confined systems, good agreement is found with macroscopic considerations based on classical nucleation theory. The results are discussed in the context of recent experimental work on the extrusion of water in hydrophobic pores.

Journal Article↗

Dynamics of simple liquids at heterogeneous surfaces: molecular-dynamics simulations and hydrodynamic description.

In this paper we consider the effect of surface heterogeneity on the slippage of fluid, using two complementary approaches. First, MD simulations of a corrugated hydrophobic surface have been performed. A dewetting transition, leading to a super-hydrophobic state, is observed for pressure below a "capillary" pressure. Conversely, a very large slippage of the fluid on this composite interface is found in this super-hydrophobic state. Second, we propose a macroscopic estimate of the effective slip length on the basis of continuum hydrodynamics, in order to rationalize the previous MD results. This calculation allows to estimate the effect of a heterogeneous slip length pattern at the composite interface. Comparison between the two approaches shows that they are in good agreement at low pressure, but highlights the role of the exact shape of the liquid-vapor interface at higher pressure. These results confirm that small variations in the roughness of a surface can lead to huge differences in the slip effect. On the basis of these results, we propose some guidelines to design highly slippery surfaces, motivated by potential applications in microfluidics.

Journal Article↗

The interplay between screening properties and colloid anisotropy: towards a reliable pair potential for disc-like charged particles.

The electrostatic potential of a highly charged disc (clay platelet) in an electrolyte is investigated in detail. The corresponding non-linear Poisson-Boltzmann (PB) equation is solved numerically, and we show that the far-field behaviour (relevant for colloidal interactions in dilute suspensions) is exactly that obtained within linearized PB theory, with the surface boundary condition of a uniform potential. The latter linear problem is solved by a new semi-analytical procedure and both the potential amplitude (quantified by an effective charge) and potential anisotropy coincide closely within PB and linearized PB, provided the disc bare charge is high enough. This anisotropy remains at all scales; it is encoded in a function that may vary over several orders of magnitude depending on the azimuthal angle under which the disc is seen. The results allow to construct a pair potential for discs interaction, that is strongly orientation dependent.

Aluminum Silicates↗

Elastic consequences of a single plastic event: a step towards the microscopic modeling of the flow of yield stress fluids.

With the eventual aim of describing flowing elasto-plastic materials, we focus here on the elementary process of such a flow, a plastic event, and compute the long-range perturbation it elastically induces in a medium submitted to a global shear strain. We characterize the effect of a nearby wall on this perturbation, and quantify the importance of finite-size effects. Although most of our explicit formulae refer to 2D situations, our statements hold for 3D situations as well.

Journal Article↗

Intrusion and extrusion of water in hydrophobic mesopores.

We present experimental and theoretical results on intrusion-extrusion cycles of water in hydrophobic mesoporous materials, characterized by independent cylindrical pores. The intrusion, which takes place above the bulk saturation pressure, can be well described using a macroscopic capillary model. Once the material is saturated with water, extrusion takes place upon reduction of the externally applied pressure. Our results for the extrusion pressure can only be understood by assuming that the limiting extrusion mechanism is the nucleation of a vapor bubble inside the pores. A comparison of calculated and experimental nucleation pressures shows that a proper inclusion of line tension effects is necessary to account for the observed values of nucleation barriers. Negative line tensions of order 10(-11) J m(-1) are found for our system, in reasonable agreement with other experimental estimates of this quantity.

Journal Article↗

A study of the static yield stress in a binary Lennard-Jones glass.

The stress-strain relations and the yield behavior of a model glass (a 80:20 binary Lennard-Jones mixture) is studied by means of molecular dynamics simulations. In a previous paper it was shown that, at temperatures below the glass transition temperature, Tg, the model exhibits shear banding under imposed shear. It was also suggested that this behavior is closely related to the existence of a (static) yield stress (under applied stress, the system does not flow until the stress sigma exceeds a threshold value sigmay). A thorough analysis of the static yield stress is presented via simulations under imposed stress. Furthermore, using steady shear simulations, the effect of physical aging, shear rate and temperature on the stress-strain relation is investigated. In particular, we find that the stress at the yield point (the "peak"-value of the stress-strain curve) exhibits a logarithmic dependence both on the imposed shear rate and on the "age" of the system in qualitative agreement with experiments on amorphous polymers, and on metallic glasses. In addition to the very observation of the yield stress which is an important feature seen in experiments on complex systems like pastes, dense colloidal suspensions and foams, further links between our model and soft glassy materials are found. An example is the existence of hysteresis loops in the system response to a varying imposed stress. Finally, we measure the static yield stress for our model and study its dependence on temperature. We find that for temperatures far below the mode coupling critical temperature of the model (Tc = 0.435 in Lennard-Jones units), sigmay decreases slowly upon heating followed by a stronger decrease as Tc is approached. We discuss the reliability of results on the static yield stress and give a criterion for its validity in terms of the time scales relevant to the problem.

Journal Article↗

Where does a cohesive granular heap break?

In this paper, we consider the effect of cohesion on the stability of a granular heap and compute the maximum angle of stability of the heap as a function of the cohesion. We show that the stability is strongly affected by the dependence of the cohesion on the local pressure. In particular, this dependence is found to determine the localization of the failure plane. While for a constant adhesion force, slip occurs deep inside the heap, surface failure is obtained for a linear variation of the cohesion on the normal stress. Such a transition allows to interpret some recent experimental results on cohesive materials.

Journal Article↗

Shear localization in a model glass.

Using molecular dynamics simulations, we show that a simple model of a glassy material exhibits the shear localization phenomenon observed in many complex fluids. At low shear rates, the system separates into a fluidized shear band and an unsheared part. The two bands are characterized by a very different dynamics probed by a local intermediate scattering function. Furthermore, a stick-slip motion is observed at very small shear rates. Our results, which open the possibility of exploring complex rheological behavior using simulations, are compared to recent experiments on various soft glasses.

Journal Article↗

Granular shear flow dynamics and forces: experiment and continuum theory.

We analyze the main features of granular shear flow through experimental measurements in a Couette geometry and a comparison to a locally Newtonian, continuum model of granular flow. The model is based on earlier hydrodynamic models, adjusted to take into account the experimentally observed coupling between fluctuations in particle motion and mean-flow properties. Experimentally, the local velocity fluctuations are found to decrease more slowly with distance from the shear surface than the velocity. This can be explained by an effective viscosity that diverges more rapidly as the random-close-packing density is approached than is predicted by Enskog theory for dense hard-sphere systems. Experiment and theory are in good agreement, especially for the following key features of granular flow: The flow is confined to a small shear band, fluctuations decay approximately exponentially away from the sheared wall, and the shear stress is approximately independent of the shear velocity. The functional forms of the velocity and fluctuation profiles predicted by the model agree with the experimental results.

Journal Article↗

Particle dynamics in sheared granular matter

The particle dynamics and shear forces of granular matter in a Couette geometry are determined experimentally. The normalized tangential velocity V(y) declines strongly with distance y from the moving wall, independent of the shear rate and of the shear dynamics. Local rms velocity fluctuations deltaV(y) scale with the local velocity gradient to the power 0.4+/-0.05. These results agree with a locally Newtonian, continuum model, where the granular medium is assumed to behave as a liquid with a local temperature [deltaV(y)](2) and density dependent viscosity.

Journal Article↗

Metastability and nucleation in capillary condensation

This paper is devoted to thermally activated dynamics of capillary condensation. On the basis of a simple model we identify the critical nucleus involved in the transition mechanism and calculate the nucleation barrier from which we obtain information on the nucleation time. Close to the condensation point, the theory predicts extremely large energy barriers leading to strong metastabilities, long time dependencies, and large hysteresis in agreement with experimental observations in mesoporous media. The validity of the model is assessed using a numerical simulation of a time-dependent Ginzburg-Landau model for the confined system.

Journal Article↗

[Fibro-osseous pseudo-tumor of the fingers. A little known entity. A case of an 11 year-old girl].

The authors report a case of fibro-osseous pseudo-tumour affecting a long finger. This is a rare tumour difficult to diagnose. Complete excision of the tumour was delayed till two years after its appearance as it's true nature had not been recognised at the time of the initial histopathologic examination. It is a benign tumour with a good prognosis as it does not undergo malignant degeneration and does not recur locally if excision has been complete. Errors in interpretation of the histopathologic picture have, in the past, led to unwarranted amputations of the involved fingers.

Child↗

[Radiographic and histologic observations of autoclaved and non autoclaved allografts in the distal femoral metaphysis in dogs].

PURPOSE OF THE STUDY: A canine experimental work was performed, to study osseointegration of cortico-cancellous bone allografts implanted in the lower femoral metaphysis. Particular attention was focused on observing the effects of autoclaving, used as a sterilizing method, on the osseointegration of bone allografts. MATERIAL AND METHODS: Eighteen dogs were operated on and three groups were formed according to the type of graft: the first group included 4 autoclaved autografts and one animal, in which no graft was implanted. The second group included 11 frozen allografts in which 4 had been autoclaved. The third group included 2 animals, who received autoclaved allografts and were sacrificed at 10 months. In the first two groups, all animals were treated with the same protocol: graft stabilization using a plate, and specimen harvest at 4 months after surgery. In the third group, graft stabilization was obtained by press-fit only, and no plate was used. RESULTS: Overall roentgenographic results were satisfactory, suggesting graft fusion with the host. Histological results were inferior to roentgenographic results, and showed graft resorption, but only some signs of bone formation at the periphery of the graft. DISCUSSION: Roentgenographic results appeared optimistic, when compared to histological results. This suggests that roentgenographic results should not be considered as a reliable criteria for graft osseointegration. Despite favorable experimental conditions (cortico-cancellous graft implanted in the metaphyseal region, in a loaded segment of the skeleton, optimum graft stabilization using lateral plating), histological results were poor. New bone formation was observed at the periphery of the graft, but the major part of the graft remained fibrous. No difference was found between autoclaved and non autoclaved allografts in this small series. CONCLUSION: These preliminary results suggest that autoclaving does not impair osseointegration of frozen bone allografts, which anyway remains incomplete.

Animals↗