PubMed Health⌕ Search

Biomedical subjects

L Forró

Publications and source records attributed to L Forró.

At least 19 recordsLinked to original sources
PubMed2006

Magnetic fullerenes inside single-wall carbon nanotubes.

C(59)N magnetic fullerenes were formed inside single-wall carbon nanotubes by vacuum annealing functionalized C(59)N molecules encapsulated inside the tubes. A hindered, anisotropic rotation of C(59)N was deduced from the temperature dependence of the electron spin resonance spectra near room temperature. Shortening of the spin-lattice relaxation time T(1) of C(59)N indicates a reversible charge transfer toward the host nanotubes above approximately 350 K. Bound C(59)N-C(60) heterodimers are formed at lower temperatures when C(60) is coencapsulated with the functionalized C(59)N. In the 10-300 K range, T(1) of the heterodimer shows a relaxation dominated by the conduction electrons on the nanotubes.

Journal Article↗
PubMed2006

Exploring the mechanical properties of single vimentin intermediate filaments by atomic force microscopy.

Intermediate filaments (IFs), together with actin filaments and microtubules, compose the cytoskeleton. Among other functions, IFs impart mechanical stability to cells when exposed to mechanical stress and act as a support when the other cytoskeletal filaments cannot keep the structural integrity of the cells. Here we present a study on the bending properties of single vimentin IFs in which we used an atomic force microscopy (AFM) tip to elastically deform single filaments hanging over a porous membrane. We obtained a value for the bending modulus of non-stabilized IFs between 300 MPa and 400 MPa. Our results together with previous ones suggest that IFs present axial sliding between their constitutive building blocks and therefore have a bending modulus that depends on the filament length. Measurements of glutaraldehyde-stabilized filaments were also performed to reduce the axial sliding between subunits and therefore provide a lower limit estimate of the Young's modulus of the filaments. The results show an increment of two to three times in the bending modulus for the stabilized IFs with respect to the non-stabilized ones, suggesting that the Young's modulus of vimentin IFs should be around 900 MPa or higher.

Aluminum Oxide↗
PubMed2006

Separation of orbital contributions to the optical conductivity of BaVS(3).

The correlation-driven metal-insulator transition (MIT) of BaVS(3) was studied by polarized infrared spectroscopy. In the metallic state two types of electrons coexist at the Fermi energy: the quasi-1D metallic transport of A(1g) electrons is superimposed on the isotropic hopping conduction of localized E(g) electrons. The "bad-metal" character and the weak anisotropy are the consequences of the large effective mass m(eff) approximately 7 m(e) and scattering rate Gamma > or = 160 meV of the quasiparticles in the A(1g) band. There is a pseudogap above T(MI) = 69 K, and in the insulating phase the gap follows the BCS-like temperature dependence of the structural order parameter with Delta(ch) approximately 42 meV in the ground state. The MIT is described in terms of a weakly coupled two-band model.

Journal Article↗
PubMed2006

Growth of single-crystalline KNbO3 nanostructures.

This communication reports on the growth of highly uniform KNbO3 nanowires exhibiting a narrow diameter distribution around 60 nm and a length-to-width ratio up to 100. The nanowires were prepared by a hydrothermal route, which enables simple, gram-scale production. A systematic study of the synthesized nanowires in terms of the morphological and chemical characteristics was carried out by varying the temperature-pressure conditions and the composition of the starting mixture. The results indicate that highly uniform single-crystalline nanowires form within a narrow window of the ternary phase diagram of KOH-Nb2O5-H2O.

Crystallization↗
PubMed2006

Carbon nanotube linear bearing nanoswitches.

We exploit the remarkable low-friction bearing capabilities of multiwalled carbon nanotubes (MWNTs) to realize nanoelectromechanical switches. Our switches consist of two open-ended MWNT segments separated by a nanometer-scale gap. Switching occurs through electrostatically actuated sliding of the inner nanotube shells to close the gap, producing a conducting ON state. For double-walled nanotubes in particular, a gate voltage can restore the insulating OFF state. Acting as a nonvolatile memory element capable of several switching cycles, our devices are straightforward to implement, self-aligned, and do not require complex fabrication or geometries, allowing for convenient scalability.

Electrochemistry↗
PubMed2005

Ballistic phonon thermal transport in multiwalled carbon nanotubes.

We report electrical transport experiments, using the phenomenon of electrical breakdown to perform thermometry, that probe the thermal properties of individual multiwalled carbon nanotubes. Our results show that nanotubes can readily conduct heat by ballistic phonon propagation. We determine the thermal conductance quantum, the ultimate limit to thermal conductance for a single phonon channel, and find good agreement with theoretical calculations. Moreover, our results suggest a breakdown mechanism of thermally activated C-C bond breaking coupled with the electrical stress of carrying approximately 10(12) A/m2. We also demonstrate a current-driven self-heating technique to improve the conductance of nanotube devices dramatically.

Journal Article↗
PubMed2005

Scaling law in carbon nanotube electromechanical devices.

We report a method for probing electromechanical properties of multiwalled carbon nanotubes (CNTs). This method is based on atomic force microscopy measurements on a doubly clamped suspended CNT electrostatically deflected by a gate electrode. We measure the maximum deflection as a function of the applied gate voltage. Data from different CNTs scale into an universal curve within the experimental accuracy, in agreement with a continuum model prediction. This method and the general validity of the scaling law constitute a very useful tool for designing actuators and in general conducting nanowire-based nanoelectromechanical systems.

Journal Article↗
PubMed2005

Direct observation of nondiffusive motion of a Brownian particle.

The thermal position fluctuations of a single micron-sized sphere immersed in a fluid were recorded by optical trapping interferometry with nanometer spatial and microsecond temporal resolution. We find, in accord with the theory of Brownian motion including hydrodynamic memory effects, that the transition from ballistic to diffusive motion is delayed to significantly longer times than predicted by the standard Langevin equation. This delay is a consequence of the inertia of the fluid. On the shortest time scales investigated, the sphere's inertia has a small, but measurable, effect.

Journal Article↗
PubMed2005

Growth kinetics of one-dimensional KNbO3 nanostructures by hydrothermal processing routes.

The growth kinetics of one-dimensional single-crystalline KNbO(3) nanostructures (nanowires and nanofingers, the latter understood as defective nanowires) prepared by hydrothermal processing routes has been theoretically studied. A model taking into account the cube-based morphology of the nanostructures, their defects as the KOH proportion in the starting solution increases, and the partial depletion of species in the solution at the kink regions is proposed. Such a model allows the morphological evolution of the nanostructures to be successfully reproduced, shedding light on the origin of their highly anisotropic growth.

Journal Article↗
PubMed2005

Electron delocalization and dimerization in solid C59N doped C60 fullerene.

Electron spin resonance and ab initio electronic structure calculations show an intricate relation between molecular rotation and chemical bonding in the dilute solid solution. The unpaired electron of C59N is delocalized over several C60 molecules above 700 K, while at lower temperatures it remains localized within short range. The data suggest that below 350 K rigid C59N-C60 heterodimers are formed in thermodynamic equilibrium with dissociated rotating molecules. The structural fluctuations between heterodimers and dissociated molecules are accompanied by simultaneous electron spin transfer between C60 and C59N molecules. The calculation confirms that in the C59N-C60 heterodimer the spin density resides mostly on the C60 moiety, while it is almost entirely on C59N in the dissociated case.

Journal Article↗
PubMed2004

Determination of the intershell conductance in multiwalled carbon nanotubes.

We report on the intershell electron transport in multiwalled carbon nanotubes (MWNTs). To do this, local and nonlocal four-point measurements are used to study the current path through the different shells of a MWNT. For short electrode separations less, similar 1 mum the current mainly flows through the two outer shells, described by a resistive transmission line with an intershell conductance per length of approximately (10 kOmega)(-1)/microm. The intershell transport is tunnel type and the transmission is consistent with the estimate based on the overlap between pi orbitals of neighboring shells.

Journal Article↗
PubMed2004

Reinforcement of single-walled carbon nanotube bundles by intertube bridging.

During their production, single-walled carbon nanotubes form bundles. Owing to the weak van der Waals interaction that holds them together in the bundle, the tubes can easily slide on each other, resulting in a shear modulus comparable to that of graphite. This low shear modulus is also a major obstacle in the fabrication of macroscopic fibres composed of carbon nanotubes. Here, we have introduced stable links between neighbouring carbon nanotubes within bundles, using moderate electron-beam irradiation inside a transmission electron microscope. Concurrent measurements of the mechanical properties using an atomic force microscope show a 30-fold increase of the bending modulus, due to the formation of stable crosslinks that effectively eliminate sliding between the nanotubes. Crosslinks were modelled using first-principles calculations, showing that interstitial carbon atoms formed during irradiation in addition to carboxyl groups, can independently lead to bridge formation between neighbouring nanotubes.

Beta Particles↗
PubMed2004

Geometrical dependence of high-bias current in multiwalled carbon nanotubes.

We have studied the high-bias transport properties of the different shells that constitute a multiwalled carbon nanotube. The current is shown to be reduced as the shell diameter is decreased or the length is increased. We assign this geometrical dependence to the competition between the electron-phonon scattering process and Zener tunneling.

Journal Article↗
PubMed2004

Oscillation modes of microtubules.

Microtubules are long, filamentous protein complexes which play a central role in several cellular physiological processes, such as cell division transport and locomotion. Their mechanical properties are extremely important since they determine the biological function. In a recently published experiment [Phys. Rev. Lett. 89 (2002) 248101], microtubule's Young's and shear moduli were simultaneously measured, proving that they are highly anisotropic. Together with the known structure, this finding opens the way to better understand and predict their mechanical behavior under a particular set of conditions. In the present study, we modeled microtubules by using the finite elements method and analyzed their oscillation modes. The analysis revealed that oscillation modes involving a change in the diameter of the microtubules strongly depend on the shear modulus. In these modes, the correlation times of the movements are just slightly shorter than diffusion times of free molecules surrounding the microtubule. It could be therefore speculated that the matching of the two timescales could play a role in facilitating the interactions between microtubules and MT associated proteins, and between microtubules and tubulins themselves.

Animals↗
PubMed2002

Nanomechanics of microtubules.

We have determined the mechanical anisotropy of a single microtubule by simultaneously measuring the Young's and the shear moduli in vitro. This was achieved by elastically deforming the microtubule deposited on a substrate tailored by electron-beam lithography with a tip of an atomic force microscope. The shear modulus is 2 orders of magnitude lower than the Young's, giving rise to a length-dependent flexural rigidity of microtubules. The temperature dependence of the microtubule's bending stiffness in the (5-40) degrees C range shows a strong variation upon cooling coming from the increasing interaction between the protofilaments.

Anisotropy↗
PubMed2002

Observation of an unconventional metal-insulator transition in overdoped CuO2 compounds.

The electron dynamics in the normal state of Bi(2)Sr(2)CaCu(2)O(8+delta) is studied by inelastic light scattering over a wide range of doping. A strong anisotropy of the electron relaxation is found which cannot be explained by single-particle properties alone. The results strongly indicate the presence of an unconventional quantum-critical metal-insulator transition where "hot" (antinodal) quasiparticles become insulating while "cold" (nodal) quasiparticles remain metallic. A phenomenology is developed which allows a quantitative understanding of the Raman results and provides a scenario which links single- and many-particle properties.

Journal Article↗
PubMed2001

Anisotropy of superconducting MgB2 as seen in electron spin resonance and magnetization data.

We observed the conduction electron spin resonance (CESR) in fine powders of MgB2 both in the superconducting and normal states. The Pauli susceptibility is chi(s) = 2.0 x 10(-5) emu/mole in the temperature range of 450 to 600 K. The spin relaxation rate has an anomalous temperature dependence. The CESR measured below T(c) at several frequencies suggests that MgB2 is a strongly anisotropic superconductor with the upper critical field, H(c2), ranging between 2 and 16 T. The high-field reversible magnetization data of a randomly oriented powder sample are well described assuming that MgB2 is an anisotropic superconductor with H(ab)(c2)/H(c)(c2) approximately 6-9.

Journal Article↗