PubMed Health⌕ Search

Biomedical subjects

L Goetsch

Publications and source records attributed to L Goetsch.

At least 37 records · Page 2Linked to original sources

MIF2 is required for mitotic spindle integrity during anaphase spindle elongation in Saccharomyces cerevisiae.

The function of the essential MIF2 gene in the Saccharomyces cerevisiae cell cycle was examined by overepressing or creating a deficit of MIF2 gene product. When MIF2 was overexpressed, chromosomes missegregated during mitosis and cells accumulated in the G2 and M phases of the cell cycle. Temperature sensitive mutants isolated by in vitro mutagenesis delayed cell cycle progression when grown at the restrictive temperature, accumulated as large budded cells that had completed DNA replication but not chromosome segregation, and lost viability as they passed through mitosis. Mutant cells also showed increased levels of mitotic chromosome loss, supersensitivity to the microtubule destabilizing drug MBC, and morphologically aberrant spindles. mif2 mutant spindles arrested development immediately before anaphase spindle elongation, and then frequently broke apart into two disconnected short half spindles with misoriented spindle pole bodies. These findings indicate that MIF2 is required for structural integrity of the spindle during anaphase spindle elongation. The deduced Mif2 protein sequence shared no extensive homologies with previously identified proteins but did contain a short region of homology to a motif involved in binding AT rich DNA by the Drosophila D1 and mammalian HMGI chromosomal proteins.

Alleles↗

Requirement for ESP1 in the nuclear division of Saccharomyces cerevisiae.

Mutations in the ESP1 gene of Saccharomyces cerevisiae disrupt normal cell-cycle control and cause many cells in a mutant population to accumulate extra spindle pole bodies. To determine the stage at which the esp1 gene product becomes essential for normal cell-cycle progression, synchronous cultures of ESP1 mutant cells were exposed to the nonpermissive temperature for various periods of time. The mutant cells retained viability until the onset of mitosis, when their viability dropped markedly. Examination of these cells by fluorescence and electron microscopy showed the first detectable defect to be a structural failure in the spindle. Additionally, flow cytometric analysis of DNA content demonstrated that massive chromosome missegregation accompanied this failure of spindle function. Cytokinesis occurred despite the aberrant nuclear division, which often resulted in segregation of both spindle poles to the same cell. At later times, the missegregated spindle pole bodies entered a new cycle of duplication, thereby leading to the accumulation of extra spindle pole bodies within a single nucleus. The DNA sequence predicts a protein product similar to those of two other genes that are also required for nuclear division: the cut1 gene of Schizosaccharomyces pombe and the bimB gene of Aspergillus nidulans.

Amino Acid Sequence↗

Characterization of four B-type cyclin genes of the budding yeast Saccharomyces cerevisiae.

The previously described CLB1 and CLB2 genes encode a closely related pair of B-type cyclins. Here we present the sequences of another related pair of B-type cyclin genes, which we term CLB3 and CLB4. Although CLB1 and CLB2 mRNAs rise in abundance at the time of nuclear division, CLB3 and CLB4 are turned on earlier, rising early in S phase and declining near the end of nuclear division. When all possible single and multiple deletion mutants were constructed, some multiple mutations were lethal, whereas all single mutants were viable. All lethal combinations included the clb2 deletion, whereas the clb1 clb3 clb4 triple mutant was viable, suggesting a key role for CLB2. The inviable multiple clb mutants appeared to have a defect in mitosis. Conditional clb mutants arrested as large budded cells with a G2 DNA content but without any mitotic spindle. Electron microscopy showed that the spindle pole bodies had duplicated but not separated, and no spindle had formed. This suggests that the Clb/Cdc28 kinase may have a relatively direct role in spindle formation. The two groups of Clbs may have distinct roles in spindle formation and elongation.

Amino Acid Sequence↗

Anti-tumoral activity of L and D isomers of aspartic acid beta-hydroxamate on L5178Y leukemia.

D and L isomers of aspartic acid beta-hydroxamate (respectively DAH and LAH) were compared for their in vitro and in vivo activity against the murine leukemia L5178Y and their tolerance in vivo in DBA/2 mice. DAH and LAH displayed comparable cytotoxic activity against L5178Y leukemia in vitro. Death of leukemia cells was observed at concentrations above 1.2 mM for both DAH and LAH. High concentrations of L-asparagine partially reversed the growth-inhibitory effects of DAH and LAH on L5178Y cells for concentrations of DAH and LAH lower than 0.6 mM. Intraperitoneal administration of DAH and LAH to mice showed that the LD10, LD50 and LD90 of DAH was 3- to 4-fold greater for DAH than for LAH. DAH was able to eradicate L5178Y tumors in mice without inducing toxic deaths, whereas LAH at comparable doses killed all the animals treated.

Animals↗

MPS1 and MPS2: novel yeast genes defining distinct steps of spindle pole body duplication.

It is crucial to the eucaryotic cell cycle that the centrosome undergo precise duplication to generate the two poles of the mitotic spindle. In the budding yeast Saccharomyces cerevisiae, centrosomal functions are provided by the spindle pole body (SPB), which is duplicated at the time of bud emergence in G1 of the cell cycle. Genetic control of this process has previously been revealed by the characterization of mutants in CDC31 and KAR1, which prevent SPB duplication and lead to formation of a monopolar spindle. Newly isolated mutations described here (mps1 and mps2, for monopolar spindle) similarly cause monopolar mitosis but their underlying effects on SPB duplication are unique. The MPS1 gene is found by electron microscopy to be essential for proper formation of the site at which the new SPB normally arises adjacent to the existing one. By contrast, a mutation in MPS2 permits duplication to proceed, but the newly formed SPB is structurally defective and unable to serve as a functional spindle pole. Distinct temporal requirements for the CDC31, MPS1, and MPS2 gene functions during the SPB duplication cycle further demonstrate the individual roles of these genes in the morphogenetic pathway.

Cell Cycle↗

The HOP1 gene encodes a meiosis-specific component of yeast chromosomes.

The HOP1 gene in Saccharomyces cerevisiae is important for meiotic chromosomal pairing, because hop1 diploids fail to form synaptonemal complex during meiosis and are defective in crossing over between, but not within, chromosomes. We demonstrate here that the HOP1 gene is transcriptionally regulated during sporulation and that the HOP1 protein is situated along the lengths of meiotic chromosomes. Furthermore, the HOP1 protein contains a Cys2/Cys2 zinc finger motif. A mutation within this motif that changes a cysteine to serine results in the hop1 phenotype, consistent with the possibility that the HOP1 gene product acts in chromosome synapsis by directly interacting with DNA. These observations demonstrate that HOP1 encodes a component of meiotic chromosomes, perhaps serving as a constituent of the synaptonemal complex.

Amino Acid Sequence↗

A yeast gene essential for regulation of spindle pole duplication.

In eucaryotic cells, duplication of spindle poles must be coordinated with other cell cycle functions. We report here the identification in Saccharomyces cerevisiae of a temperature-sensitive lethal mutation, esp1, that deregulates spindle pole duplication. Mutant cells transferred to the nonpermissive temperature became unable to continue DNA synthesis and cell division but displayed repeated duplication of their spindle pole bodies. Although entry into this state after transient challenge by the nonpermissive temperature was largely lethal, rare survivors were recovered and found to have become increased in ploidy. If the mutant cells were held in G0 or G1 during exposure to the elevated temperature, they remained viable and maintained normal numbers of spindle poles. These results suggest dual regulation of spindle pole duplication, including a mechanism that promotes duplication as cells enter the division cycle and a negative regulatory mechanism, controlled by ESP1, that limits duplication to a single occurrence in each cell division cycle. Tetrad analysis has revealed that ESP1 resides at a previously undescribed locus on the right arm of chromosome VII.

Cell Cycle↗

Reversible pachytene arrest of Saccharomyces cerevisiae at elevated temperature.

The temperature sensitivity of sporulation in a well-characterized yeast strain lacking any known temperature sensitive genes has been investigated. Cytological observations by electron microscopy demonstrate that cells incubated in sporulation medium at a temperature inhibitory to sporulation became arrested in meiotic prophase. The stage of arrest was identified as pachytene by the presence of duplicated (but unseparated) spindle pole bodies and synaptonemal complex. Transfer of the arrested culture to lower temperature permitted resumption of meiosis and sporulation; transfer to vegetative medium resulted in reversion to mitotic division. Genetic analysis of cells that had reverted to mitosis revealed that commitment to intragenic recombination had occurred by the time of arrest. Prolonged incubation at the elevated temperature resulted in the enhancement of intragenic recombination above normal levels, suggesting that some aspect of recombination continued to occur during the pachytene arrest. Evidence is presented that DNA replication, although depressed overall in the arrested cultures, had occurred to completion in many arrested cells.

DNA Replication↗

Meiotic cytology of Saccharomyces cerevisiae in protoplast lysates.

This report describes cytological features of meiosis in Saccharomyces cerevisiae prepared for electron microscopy by lysis of protoplasts or nuclei on an aqueous surface. Whereas the chromatin of cells lysed before or after meiotic prophase was widely dispersed, pachytene bivalents appeared as discrete, elongate masses of compact chromatin. These bivalents were of nearly uniform thickness; they ranged in length from about 0.6 micrograms to 4.0 micrograms, with a median of 1.6-1.8 micrograms. Enzymatic digestion of chromosomal DNA removed the chromatin to reveal the underlying synaptonemal complex. The lysis of partially purified nuclei was less disruptive and thereby revealed the regular association of the telomeres with fragments of the nuclear envelope. In tetraploid cells, pachytene lysates contained quadrivalents characterized by the close apposition of chromatin masses of similar length. One or more points of intimate association appear to represent sites of exchange between pairing partners. The departure of the diploid cells from pachytene was accompanied by the renewed association of spindle microtubules with the chromosomes shortly before the diplotene chromosomes decondensed. Later, the successive meiotic divisions were identified by the appearance of a single spindle for meiosis I and of two spindles for meiosis II.

Chromatin↗

The role of spindle pole bodies and modified microtubule ends in the initiation of microtubule assembly in Saccharomyces cerevisiae.

The spindle poles of the budding yeast, Saccharomyces cerevisiae, have been removed from mitotic and meiotic cells by osmotic lysis of spheroplasts. The spindle pole bodies (SPBs)--diskoidal structures also termed 'spindle plaques'--have been analysed for their ability to potentiate the polymerization of microtubules in vitro. Free SPBs were completely deprived of any detectable native microtubules by incubation in the absence of added tubulin and were then challenged with chick neurotubulin, which had been rendered partially defective in self-initiation of repolymerization. Electron microscopy revealed that these SPBs served as foci for the initiation of microtubule polymerization in vitro. Because the attached microtubules elongated linearly with time but did not increase in numbers after the first stage of the reaction, it is apparent that there are a limited number of sites for initiation. The initiating potential of the SPBs was found to be inhibited by enzymic hydrolysis of protein but not of DNA. The microtubule end proximal to the site of initiation on the SPB is distinguished by a 'closed' appearance because of a terminal component which is continuous with the microtubule wall, whereas the distal end has the 'open' appearance characteristic of freely repolymerized neurotubules. SPBs which were partially purified on sucrose gradients retained their ability to initiate the assembly of microtubules with the same structural differentiation of their ends. The occurrence of closed proximal ends on native yeast microtubules suggests that closed ends may play a role in the initiation of microtubule polymerization in vivo, as well as in vitro.

Cell Differentiation↗

Electron microscopic observations on the meiotic karyotype of diploid and tetraploid Saccharomyces cerevisiae.

Certain strains of Saccharomyces cerevisiae contain visible segments of synaptonemal complex which are apparent components of bivalents in pachytene of meiotic prophase. The synaptonemal complex has the typical width in the frontal plane but is unusually thin in the sagittal plane, thus accounting for its poor visibility. Amorphous densities situated adjacent to the central element occur at intervals suggesting their coincidence with sites of crossing over. Reconstruction of the synaptonemal complex from serial sections has permitted karyotypic analysis. The number of segments of synaptonemal complex and the distribution of their legths is consistent with the genetic map. Two, possibly three, segments enter the nucleolus as if bearing sequences encoding ribosomal RNA. Reconstruction of tetraploid nuclei reveals an approximate doubling of the diploid chromosome number and confirms the pattern of nucleolar entry. Quadrivalent pairing is evident between the pairs of synaptonemal complex segments in the tetraploid nuclei.

Cell Nucleus↗

Behavior of spindles and spindle plaques in the cell cycle and conjugation of Saccharomyces cerevisiae.

The interdependence of spindle plaque with other aspects of cell division and conjugation in Saccharomyces cerevisiae has been investigated. Three forms of the spindle plaque appear sequentially before the formation of the complete, intranuclear spindle. The single plaque is present initially in the mitotic cycle; it becomes transformed into a satellite-bearing single plaque during the latter part of G1. Subsequently, plaque duplication yields the double plaque characteristic of the early phase of budding, which coincides with the period of chromosome replication (S). The eventual separation of these plaques to form a complete spindle, with a single plaque at each pole, is nearly coincident with the completion of S. The form of the plaque differs in two independent cases of G1 arrest: the single plaque is found in a cell in stationary arrest of growth, whereas a cell arrested by mating factors in preparation for conjugation contains a satellite-bearing single plaque. The latter form is retained during zygote formation, where it serves as the initial site of fusion of each prezygotic nuceus with the other. This fusion results in the formation of a single zygotic nucleus with a satellite-bearing single plaque, which is subsequently transformed into a double plaque as the zygote buds. The double plaque is situated adjacent to the site of bud emergence in both vegetative cells and zygotes.

Cell Division↗

Stability and CTL-activity of P40/ELA melanoma vaccine candidate.

The decapeptide ELA (ELAGIGILTV), a Melan-A/MART-1 antigen immunodominant peptide analogue, is an interesting melanoma vaccine candidate alone or in combination with other tumour antigens. P40, the recombinant outer membrane protein A of Klebsiella pneumoniae (kpOmpA), was recently shown to target dendritic cells and to induce peptide-specific CTLs. Here we investigated the adjuvant role of P40 mixed or chemically conjugated to ELA. This compound is an N-terminal glutamic acid-containing peptide. However, it has been reported that the amino group and the gamma-carboxylic group of glutamic acids easily condense to form pyroglutamic derivatives. Usually, to overcome this stability problem, peptides of pharmaceutical interest were developed with a pyroglutamic acid instead of N-terminal glutamic acid, without loss of pharmacological properties. Unfortunately, the pyroglutamic acid derivative (PyrELA) as well as the N-terminal acetyl capped derivative (AcELA) failed to elicit CTL activity when mixed with P40 adjuvant protein. Despite the apparent minor modifications introduced by PyrELA and AcELA, these two derivatives have probably lower affinity than ELA for the class I Major Histocompatibility Complex. Furthermore, this stability problem is worse in the case of clinical grade ELA, produced as an acetate salt, like most of the pharmaceutical grade peptides. We report here that the hydrochloride shows a higher stability than the acetate and may be suitable for use in man.

Animals↗