PubMed Health⌕ Search

Biomedical subjects

L Haumesser

Publications and source records attributed to L Haumesser.

3 recordsLinked to original sources

Contact phase modulation method for acoustic nonlinear parameter measurement in solid.

In this work, a new method to measure in contact the nonlinearity parameter beta of solid plates is presented. A high frequency (HF) tone-burst signal of 20 MHz is inserted in the material by a contact-transducer (with a suitable coupling). A low frequency (LF) pulse (2.5 MHz) is applied to the other face, in the opposite direction, so that the nonlinear interaction of the two waves takes place during the back propagation toward the HF transducer. This collinear interaction creates a phase modulation of the HF tone-burst which is proportional to the beta coefficient and the particle velocity of the LF wave. To determine this particle velocity, in time domain, an extended self-reciprocity calibration of the contact LF transducer is used. A numeric phase demodulation is then performed, giving the beta coefficient of the sample. The proposed method is validated by nonlinearity parameter measurements in Fused Silica. The nonlinear parameter of Fused Silica measured is found to be in good agreement with the literature, and specially the negative sign of this parameter.

Journal Article↗

Behavior of first guided wave on finite cylindrical shells of various lengths: experimental investigation.

Acoustic backscattering from elastic cylindrical shells of finite lengths, immersed in water, is investigated. These objects, characterized by the ratio of length over diameter (L/2a = 9.76, 4.88, 2.44, a: outer radius), are excited by an obliquely incident plane acoustic wave. In the three cases studied here, the radii ratio b/a (b: inner radius) is fixed at 0.97. The investigated dimensionless frequency range extends over 10 k1a < or = 50 (k1 : wave number in water). The first guided wave, T0, is of particular interest here. The influence of the shell's length on the backscattered pressure is experimentally observed in the time-angle and frequency-angle representations. In support of this experimental study, a time-domain representation is used by extending a theoretical model that provides a geometrical description of the helical propagation of the surface waves around the shell [Bao, J. Acoust. Soc. Am. 94, 1461-1466 (1993)]. Theoretical results on cylindrical shells considered as infinitely long, with identical characteristics, are compared with both experimental representations.

Journal Article↗

Analysis of the acoustic scattering at variable incidences from an extra thin cylindrical shell bounded by hemispherical endcaps

Through an experimental approach, in this paper we investigate the acoustic wave scattering processes involved in the acoustic backscattering at variable incidences from an air-filled submerged cylindrical shell with hemispherical endcaps. Given the 1% shell thickness and the explored low frequency domain, the wave types studied are the circumferential or helical S0 wave and the helical T0 wave only. Between the axial (in the direction of the main axis of the object) and the normal incidences (normal to the main axis), two distinct angular zones can be observed depending on hemispherical or cylindrical excitation. In these zones, after a pressure wave excitation, different series of echoes on the echo wave forms are identified by their arrival times and related wave types. From results in the time domain and those obtained in the frequency domain, each acoustic response from the target corresponding to the two zones of excitation is compared with the acoustic response of canonical objects (spherical shell for axial excitation and tube for normal excitation). This analysis of the acoustic response from the target at various incidences, highlights the influence of both the endcaps and the finite length for a cylindrical shell on scattering. The study is intended to make a contribution to the knowledge of the identification of such geometrically complex objects.

Journal Article↗