PubMed Health⌕ Search

Biomedical subjects

L Hellemans

Publications and source records attributed to L Hellemans.

13 recordsLinked to original sources
PubMed2000

Aging of human skin: review of a mechanistic model and first experimental data.

The physical, chemical, and biochemical factors that accelerate skin aging have been proposed to activate a self-maintained microinflammatory process, one of the expected end results of which is an imbalance in the turnover of macromolecules in the dermis. Surface peroxides are recognized as controllable factors of skin aging, and their accumulation is attributed to environmentally induced impairment of defense enzymes. Topical application of antioxidants decreases the rate at which skin elasticity and skin thickness are modified.

Adolescent↗
PubMed2000

Evidence of chemical bonding at biomaterial-hard tissue interfaces.

For many years, glass-polyalkenoate cements have been described as possessing the unique properties of self-adherence to human hard tissues, such as bones or teeth. However, direct experimental evidence to prove the existence of chemical bonding has not been advanced. X-ray Photoelectron Spectroscopy (XPS) was used to analyze the chemical interaction of a synthesized polyalkenoic acid with enamel and synthetic hydroxyapatite. For both enamel and hydroxyapatite, the peak representing the carboxyl groups of the polyalkenoic acid was detected to have significantly shifted to a lower binding energy. De-convolution of this shifted peak disclosed two components with a peak representing unreacted carboxyl groups and a peak suggesting chemical bonding to hydroxyapatite. On average, 67.5% of the carboxyl groups of the polyalkenoic acid were measured to have bonded to hydroxyapatite. XPS of hydroxyapatite also disclosed its surface to be enriched in calcium and decreased in phosphorus, indicating that phosphorus was extracted at a relatively higher rate than calcium. Analysis of these data supports the mechanism in which carboxylic groups replace phosphate ions (PO4(3-)) of the substrate and make ionic bonds with calcium ions of hydroxyapatite. It is concluded that an ultrathin layer of a polyalkenoic acid can be prepared on a hydroxyapatite-based substrate by careful removal of non-bonded molecules. With this specimen-processing method, XPS not only provided direct evidence of chemical bonding, but also enabled us to quantify the percentages of functional groups of the polyalkenoic acids that bonded to calcium of hydroxyapatite.

Binding Sites↗
PubMed1999

A novel approach to AFM characterization of adhesive tooth-biomaterial interfaces.

A novel approach is proposed for studying tooth-biomaterial interactions with high resolution. Thus far, polished interfaces examined by AFM have not disclosed much detail, mainly due to the destruction of soft surface texture and the smearing of polishing debris across the interface that obscures the actual ultra-structure. Therefore the practical utility of diamond-knife microtomy as a sample preparation technique for imaging tooth-biomaterial interfaces by AFM with high resolution was tested in this study and compared to that of ultra-fine mechanical polishing techniques. The AFM images clearly demonstrated the enhanced potential of diamond-knife microtomy for nondestructively producing clean cross-sections through interfaces that allow the interfacial ultra-structure to be imaged by AFM with a resolution equaling that of TEM. This novel approach opens the field to the full range of scanning probe microscopy, including physical and chemical surface characterization of interfaces with a mix of soft and hard substrates.

Dental Cements↗
PubMed1999

Hybridization effectiveness of a two-step versus a three-step smear layer removing adhesive system examined correlatively by TEM and AFM.

PURPOSE: The objectives of this study were (1) to compare the hybridization effectiveness of two adhesive systems that are applied in respectively three and two steps, and (2) to determine the best resin-dentin interface preparation technique for atomic force microscopy (AFM). MATERIALS AND METHODS: The resin-dentin interface produced by the three-step OptiBond Dual-Cure (Kerr) and its simplified two-step successor OptiBond Solo (Kerr) was ultramorphologically examined using transmission electron microscopy (TEM) and AFM. Four different methods were used to prepare interface specimens for AFM: (1) polishing to a 0.1-micron finish with a silicon oxide suspension, (2) polishing to a 0.05-micron finish with an aluminum oxide suspension, (3) argon-ion etching, and (4) sectioning with a diamond knife. RESULTS: Both TEM and AFM demonstrated that some collapse of the exposed collagen fibril network, due to gentle postconditioning air-drying of the dentin surface, may not have been totally recovered through hybridization by the two-step adhesive formulation as opposed to the three-step precursor. From the four interface preparation methods, only diamond-knife sectioning revealed sufficient ultramorphologic detail and high resolution that can capitalize on the high resolution offered by AFM. CONCLUSION: First, the findings suggest that simplifying the application procedure of adhesives by combining the primer and adhesive resin into a single application step may reduce hybridization effectiveness. Future research should confirm this effect for other two- versus three-step adhesive systems. Second, diamond-knife sectioning should be used for future topographic imaging and physicomechanical testing of resin-dentin interfaces by AFM.

Bisphenol A-Glycidyl Methacrylate↗
PubMed1998

Strong enhancement of nonlinear optical properties through supramolecular chirality

A new approach to second-order nonlinear optical (NLO) materials is reported, in which chirality and supramolecular organization play key roles. Langmuir-Blodgett films of a chiral helicene are composed of supramolecular arrays of the molecules. The chiral supramolecular organization makes the second-order NLO susceptibility about 30 times larger for the nonracemic material than for the racemic material with the same chemical structure. The susceptibility of the nonracemic films is a respectable 50 picometers per volt, even though the helicene structure lacks features commonly associated with high nonlinearity. Susceptibility components that are allowed only by chirality dominate the second-order NLO response.

Journal Article↗
PubMed1996

Imaging red blood cells with the atomic force microscope.

A novel technique for the reproduction of ultramorphological images and details of the surface of normal and pathological red blood cells (RBC) was investigated. The atomic force microscope (AFM) provided high-resolution images of cell surfaces. The RBC dimensions obtained by this technique revealed differences between native red cells in smears and glutaraldehyde-fixed red cells. It was shown that fixed red blood cells were best suited for the ultramorphological imaging of the cell surface.

Erythrocytes↗
PubMed1995

Immobilizing and imaging microtubules by atomic force microscopy.

Microtubules isolated from pig brains have been immobilized on an inorganic substrate for use in AFM studies. The method employs 4-aminobutyldimethylmethoxysilane and glutaraldehyde to activate a silicon wafer for binding the biopolymer. The covalent bond ensures the positional stability of the tubules on the substrate, and allows reproducible scanning probe experiments. Microtubules have been imaged both by atomic force and scanning tunneling microscopy, yielding results very similar to electron microscopy. The average apparent height of the tubules is smaller than observed with transmission electron microscopy (25 nm) and is smaller in buffer solution (10 nm) than in air (15 nm). The biopolymer surface is softer under buffer than in air. The highest resolution was obtained with the tapping mode where surface features as small as 10 nm in X and Y have been resolved. Gold-coated tubules bound on silicon have been successfully imaged by STM, while images of uncertain origin were generated for tubules deposited on graphite. It is shown that artefacts imaged on a blank graphite surface can easily be confounded with collapsed tubules.

Animals↗
PubMed1988

Scanning probe microscopy of biological samples and other surfaces.

Scanning probe microscopes derived from the scanning tunnelling microscope (STM) offer new ways to examine surfaces of biological samples and technologically important materials. The surfaces of conductive and semiconductive samples can readily be imaged with the STM. Unfortunately, most surfaces are not conductive. Three alternative approaches were used in our laboratory to image such surfaces. 1. Crystals of an amino acid were imaged with the atomic force microscope (AFM) to molecular resolution with a force of order 10(-8) N. However, it appears that for most biological systems to be imaged, the atomic force microscope should be able to operate at forces at least one and perhaps several orders of magnitude smaller. The substitution of optical detection of the cantilever bending for the measurement by electron tunnelling improved the reliability of the instrument considerably. 2. Conductive replicas of non-conductive surfaces enabled the imaging of biological surfaces with an STM with a lateral resolution comparable to that of the transmission electron microscope. Unlike the transmission electron microscope, the STM also measures the heights of the features. 3. The scanning ion conductance microscope scans a micropipette with an opening diameter of 0.04-0.1 micron at constant ionic conductance over a surface covered with a conducting solution (e.g., the surface of plant leaves in saline solution).

Crystallization↗
PubMed1978

New electric field methods in chemical relaxation spectrometry.

New stationary relaxation methods for the investigation of ionic and dipolar equilibria are presented. The methods are based on the measurement of non-linearities in conductance and permittivity under high electric field conditions. The chemical contributions to the nonlinear effects are discussed in their static as well as their dynamic behavior. A sampling of experimental results shows the potential and range of possible applications of the new techniques. It is shown that these methods will become useful in the study of nonlinear responses to perturbation, in view of the general applicability of the experimental principles involved.

Electrochemistry↗