PubMed Health⌕ Search

Biomedical subjects

L K Tamm

Publications and source records attributed to L K Tamm.

13 recordsLinked to original sources
PubMed1992

Insertion and folding of the amino-terminal amphiphilic signal sequences of the mannitol and glucitol permeases of Escherichia coli.

Peptides which correspond to the NH2-terminal 23 or 22 residues of the mannitol and glucitol permeases (enzymes IImtl and IIgut of the bacterial phosphotransferase system; mtl-23 and gut-22) and which are believed to function in envelope targeting were synthesized chemically, and their interactions with lipid model membranes were studied. Both wild-type peptides penetrated phospholipid monolayers up to high surface pressures, and partition constants of 8.0 x 10(4) M-1 and 4.2 x 10(4) M-1, respectively, were derived from the incorporation isotherms of mtl-23 and gut-22 with monolayers of 1-palmitoyl-2-oleoyl-3-sn-phosphatidylcholine at 32 mN/m or bilayers of the same lipid. The mtl-23 peptide was highly alpha-helical in trifluoroethanol, sodium dodecyl sulfate, lysolecithin, or vesicles of 1-palmitoyl-2-oleoyl-3-sn-phosphatidylglycerol, with estimated percentages of alpha-helix ranging between 60 and 85%. The interactions with model membranes of several single site mutants (S3P, D4P, and D4K) of mtl-23 which were defective in properly assembling the mannitol permease in the cytoplasmic membrane of Escherichia coli were also studied. The contents of alpha-helix of these peptides in detergent micelles or phospholipid bilayers were not significantly changed compared with those of the wild type, suggesting that the amphiphilic NH2-terminal membrane-targeting domain could still be formed in these mutants. However, the mutants which contained a proline in positions 3 or 4, i.e. NH2-terminal to the proposed amphiphilic alpha-helix, partitioned into phospholipid monolayers with partition constants that were 2 or 4 times smaller than those of the wild type. Based on these data, a model of the amphiphilic structure of the NH2-terminal domain of the mannitol permease is discussed. This domain may interact physiologically with amphiphilic interfaces of lipids and/or proteins during membrane insertion.

Amino Acid Sequence↗
PubMed1992

Formation of supported planar bilayers by fusion of vesicles to supported phospholipid monolayers.

A technique for the production of supported phospholipid bilayers by adsorption and fusion of small unilamellar vesicles to supported phospholipid monolayers on quartz is described. The physical properties of these supported bilayers are compared with those of supported bilayers which are prepared by Langmuir-Blodgett deposition or by direct vesicle fusion to plain quartz slides. The time courses of vesicle adsorption, fusion and desorption are followed by total internal reflection fluorescence microscopy and the lateral diffusion of the lipids in the adsorbed layers by fluorescence recovery after photobleaching. Complete supported bilayers can be formed with phosphatidylcholine vesicles at concentrations as low as 35 microM. However, the adsorption, fusion and desorption kinetics strongly depend on the used lipid, NaCl and Ca2+ concentrations. Asymmetric negatively charged supported bilayers can be produced by incubating a phosphatidylcholine monolayer with vesicles composed of 80% phosphatidylcholine and 20% phosphatidylglycerol. Adsorbed vesicles can be removed by washing with buffer. The measured fluorescence intensities after washing are consistent with single supported bilayers. The lateral diffusion experiments confirm that continuous extended bilayers are formed by the monolayer-fusion technique. The measured lateral diffusion coefficient of NBD-labeled phosphatidylethanolamine is (3.6 +/- 0.5) x 10(-8) cm2/s in supported phosphatidylcholine bilayers, independent of the method by which the bilayers were prepared.

Calcium↗
PubMed1991

Membrane insertion and lateral mobility of synthetic amphiphilic signal peptides in lipid model membranes.

Amphiphilic signal sequences with the potential to form alpha-helices with a polar, charged face and an apolar face are common in proteins which are imported into mitochondria, in the PTS permeases of bacteria, and in bacterial rhodopsins. Synthetic peptides of such sequences partition into the surface region of lipid membranes where they can adopt different secondary structures. A finely controlled balance of electrostatic and hydrophobic interactions determines the 'affinity' of amphiphilic signal peptides for lipid membranes, as well as the structure, orientation and depth of penetration of these peptides in lipid bilayer membranes. The ability of an individual peptide to associate with lipid bilayer membranes in several different modes is, most likely, a general feature of amphiphilic signal peptides and is reflected in several common physical properties of their amino acid sequences.

Amino Acid Sequence↗
PubMed1991

Orientation of melittin in phospholipid bilayers. A polarized attenuated total reflection infrared study.

The helical order parameter of the 26-residue amphiphilic bee venom peptide melittin was measured by polarized attenuated total reflection infrared spectroscopy (ATR-IR) in dry phospholipid multibilayers (MBLs) and when bound to single supported planar bilayers (SPBs) under D2O. Melittin adopted an alpha-helical conformation in MBLs of dipalmitoyl-phosphatidylcholine (DPPC), 1-palmitoyl-2-oleoyl-phosphatidylcholine (POPC), a 4:1 mixture of POPC and 1-palmitoyl-2-oleoyl-phosphatidylglycerol (POPG), and when bound to SPBs of POPC:POPG (4:1). The order parameter of the alpha-helix in the bilayers depended mainly on the type of membrane preparation, and only little on the phospholipid composition of the bilayers. On hydrated SPBs, the helical order parameter was negative, indicating that the alpha-helix long axis of melittin was preferentially oriented parallel to the plane of the supported membrane. However, in dry MBLs, the helical order parameter was positive, indicating that the alpha-helix of melittin was preferentially oriented parallel to the phospholipid fatty acyl chains. It is concluded that the orientation of melittin in membranes depends on the degree of hydration of the model membranes rather than on the technique which is used for its determination. ATR-IR spectroscopy of polypeptides in or associated with supported planar membranes in D2O may become a useful tool for the determination of their orientation in and on membranes.

1,2-Dipalmitoylphosphatidylcholine↗
PubMed1990

Membrane insertion and lateral diffusion of fluorescence-labelled cytochrome c oxidase subunit IV signal peptide in charged and uncharged phospholipid bilayers.

The synthetic 25-residue signal peptide of cytochrome c oxidase subunit IV was labelled with the fluorophor 7-nitrobenz-2-oxa-1,3-diazole (NBD) at its single cysteine residue. Addition of small unilamellar vesicles of 1-palmitoyl 2-oleoyl phosphatidylcholine (POPC) to the labelled peptide resulted in a shift of the NBD excitation and emission spectra to shorter wavelengths. Binding of the peptide to the vesicles was measured by the increase in the fluorescence emission yield. A surface partition constant of (3.9 +/- 0.5) x 10(3) M-1 was derived from these titrations. When the membrane contained, in addition to POPC, negatively charged 1-palmitoyl 2-oleoyl phosphatidylglycerol (POPG), the NBD fluorescence spectra were further shifted to shorter wavelengths and exhibited increased quantum yields. The apparent partition constants were increased to 10(4)-10(5) M-1 for vesicles with 20 or 100 mol% POPG. Lateral diffusion of the peptide was measured by fluorescence recovery after photobleaching in multibilayers of POPC, POPG, POPC/POPG (4:1) and 1,2-dimyristoyl phosphatidylcholine. The lateral diffusion coefficients of the peptide in bilayers of POPC (8 x 10(-8) cm2/s at 21 degrees C) were 1.5-1.6-fold greater than those of NBD-labelled phospholipids (5 x 10(-8) cm2/s at 21 degrees C), but 1.5-1.8-fold smaller (3 x 10(-8) cm2/s in 20% POPG and at 21 degrees C) than the lipid diffusion coefficients in the negatively charged bilayers. It is concluded that the signal peptide associates with phospholipid bilayers in two different forms, which depend on the lipid charge. The experiments with POPC bilayers are well explained by a model in which the peptide partitions into the region of the phospholipid head-groups and diffuses along the membrane/water interface. If POPG is present in the membrane, electrostatic attractions between the basic residues of the peptide and the acidic lipid head-groups result in a deeper penetration of the bilayer. For this case, two models that are both consistent with the experimental data are discussed, in which the peptide either forms an oligomer of three to six partially helical membrane-spanning monomers, or inserts into the bilayer with its amphiphilic helical segment aligned parallel to the plane of the membrane and located near the head-group and outer hydrocarbon region of the bilayer.

Amino Acid Sequence↗
PubMed1990

Secondary structure of a mitochondrial signal peptide in lipid bilayer membranes.

The secondary structure of the synthetic signal peptide of cytochrome c oxidase subunit IV (coxIV-25) has been measured by circular dichroism spectroscopy in different lipid environments. CoxIV-25 is polymorphic in membranes. It forms an amphiphilic alpha-helix both in negatively charged lipid bilayers (up to 49% helix) and in detergent micelles (up to 42% helix). In association with bilayers of the zwitterionic lipid phosphatidylcholine, coxIV-25 takes an aperiodic, unidentified structure. CoxIV-25 is also partially alpha-helical in bilayers of cardiolipin, mitochondrial lipid extracts and mixtures of synthetic phosphatidylcholine and phosphatidylglycerol.

Amino Acid Sequence↗
PubMed1990

Binding of proteins to specific target sites in membranes measured by total internal reflection fluorescence microscopy.

A new quantitative technique for measuring the binding of proteins to membranes is described. The method is based on a combination of total internal reflection fluorescence microscopy and the preparation of supported planar bilayers. Specific and reversible binding of a fluorescence-labeled monoclonal antibody to lipid haptens that were embedded in supported bilayers has been measured by this technique and compared to binding experiments that were conducted on membrane vesicles in solution. Equilibrium binding constants and kinetic parameters have been determined and used to expand the picture of the antibody-lipid hapten reaction. Estimates demonstrate that this technique is capable of measuring a broad range of binding constants (down to about 10(4) M-1) using only small amounts of ligand and receptor.

Antibodies, Monoclonal↗
PubMed1989

Membrane incorporation and induction of secondary structure of synthetic peptides corresponding to the N-terminal signal sequences of the glucitol and mannitol permeases of Escherichia coli.

The 22-residue synthetic signal peptide of the glucitol permease (Enzyme IIgut of the bacterial phosphotransferase system; gut22), which in the intact protein is believed to function in envelope targeting, was found to insert into phospholipid monolayers of various phospholipid compositions up to high limiting pressures (36-41 milliNewton/m). The partition coefficient, derived from monolayer area expansion experiments, was greatest for the negatively charged gut22 when partitioning into monolayers of the zwitterionic lipid 1-palmitoyl-2-oleoyl-3-sn-phosphatidylcholine (about 1.1 X 10(5] as compared with that obtained with a mixture of 1-palmitoyl-2-oleoyl-3-sn-phosphatidylcholine and the negatively charged lipids 1-palmitoyl-2-oleoyl-3-sn-phosphatidylglycerol and cardiolipin. Gut22 contains a titratable histidyl residue (pKa = 6.8), and its protonation decreased the relative monolayer area increase 3-fold. Circular dichroism spectra showed that gut22 formed an amphiphilic alpha-helix when incorporated into lipid membranes (estimated percent helix = 65%). Fluorescence measurements indicated that tryptophan 11 is in a more hydrophobic environment in the presence of lipid than in its absence, with the environment being more hydrophobic at pH 5 than at pH 8. The more hydrophilic 15-residue signal peptide of the mannitol permease (mtl15) also incorporated into monolayers and detergent micelles (although to a lesser extent) with induction of secondary structure. Based on these results and a parallel with mitochondrial targeting in eucaryotes, we suggest that the induction of N-terminal amphiphilic structures and their association with a hydrophobic-hydrophilic interface are important for envelope targeting and the initiation of the membrane insertion of bacterial phosphoenol-pyruvate-dependent phosphotransferase system permeases.

Amino Acid Sequence↗
PubMed1988

Lateral diffusion and fluorescence microscope studies on a monoclonal antibody specifically bound to supported phospholipid bilayers.

Supported phospholipid bilayers prepared by Langmuir-Blodgett techniques were introduced recently as a new model membrane system [Tamm, L.K., & McConnell, H.M. (1985) Biophys. J. 47, 105-113]. Here, supported bilayers are applied to study the lateral diffusion and lateral distribution of membrane-bound monoclonal antibodies. A monoclonal anti-trinitrophenol antibody was found to bind strongly and with high specificity to supported phospholipid bilayers containing the lipid hapten (trinitrophenyl)phosphatidylethanolamine at various mole fractions. The lateral distribution of the membrane-bound antibodies was studied by epifluorescence microscopy. The bound antibodies aggregated into patches on a host lipid bilayer of dimyristoylphosphatidylcholine below the lipid chain melting phase transition and redistributed uniformly on fluid-phase supported bilayers. Lateral diffusion coefficients and mobile fractions of fluorescent phospholipid analogues and fluorescein-labeled antibodies were measured by fluorescence recovery after pattern photobleaching. The lateral diffusion coefficients of the membrane-bound antibodies resembled those of the phospholipids but were reduced by a factor of 2 in the fluid phase. The lipid chain melting phase transition was also reflected in the lateral diffusion coefficient of the bound antibody but occurred at a temperature about 3 deg higher than the phase transition in supported bilayers of pure phospholipids. The antibody lateral diffusion coefficients decreased in titration experiments monotonically with increasing antibody surface concentrations by a factor of 2-3. Correspondingly, a relatively small decrease of the antibody lateral diffusion coefficient was observed with increasing mole fractions of lipid haptens in the supported bilayer.

Animals↗
PubMed1986

Incorporation of a synthetic mitochondrial signal peptide into charged and uncharged phospholipid monolayers.

The interaction of the chemically synthesized 25-residue signal peptide of subunit IV of yeast cytochrome c oxidase with synthetic and natural phospholipids was studied by using a monolayer technique. Incorporation of the peptide into phospholipid monolayers was measured as surface area increase at constant surface pressure. The peptide was readily soluble in aqueous buffer, yet spontaneously inserted from an aqueous subphase into phospholipid monolayers up to limiting pressures of 30-40 mN/m. The incorporation of the positively charged peptide was strongly enhanced by the presence of negatively charged phospholipids. The molecular area of the signal peptide in monolayers was determined with a 14C-labeled signal peptide and was 560 +/- 170 A2. This is consistent with a 25-residue alpha-helical peptide incorporating with its long axis parallel to the plane of the monolayer. Incorporation isotherms into synthetic phosphatidylcholine and phosphatidylglycerol monolayers at different charge densities were analyzed in terms of a simple incorporation/binding model, involving partitioning of the peptide into the monolayer and an in-plane binding reaction of the negatively charged phospholipids to the partitioned peptide.

Kinetics↗
PubMed1985

Supported phospholipid bilayers.

Phospholipid bilayers have been formed on glass, quartz, and silicon surfaces by a sequential transfer of two monolayers at a pressure of approximately 40 dyn/cm from the air-water interface to the solid substrates. Lateral diffusion measurements of L-alpha-dipalmitoylphosphatidylcholine (DPPC) bilayers supported on oxidized silicon wafers reveal two sharp phase transitions at temperatures similar to those found in multilayer systems with several different techniques. The diffusion measurements obtained using fluorescence recovery after pattern photobleaching provide evidence for the existence of an intermediate (probably P beta' or ripple) phase in single bilayers. While in the intermediate and high temperature (liquid-crystalline L alpha) phase, the diffusion coefficients do not vary very much with temperature, a strong temperature dependence is observed in the low temperature (gel L beta') phase. This is attributed to defect-mediated diffusion. Lipids in silicon supported bilayers made from L-alpha-dioleoylphosphatidylcholine (DOPC) or L-alpha-dimyristoylphosphatidylcholine (DMPC) diffuse rapidly above their respective chain-melting transition temperatures. Arrhenius plots show straight lines with activation energies of 40.9 and 43.7 kJ/mol, respectively. Supported DPPC bilayers on oxidized silicon form long tubular liposomes when heated through their oxidized silicon form long tubular liposomes when heated through their chain-melting-phase transition, as viewed with epifluorescence microscopy. It is suggested that this is a consequence of the expansion of the lipid on the fixed solid support. Conversely, DOPC bilayers form large void areas on this substrate upon cooling. Large circular membrane defects (holes) are observed under rapid coating conditions. The formation of these defects is modulated by including small amounts of lyso-L-palmitoyl phosphatidylcholine in the DMPC-supported bilayers. A simple model describes the dependence of hole size and hole number on the concentration of lysolecithin.

Diffusion↗