PubMed Health⌕ Search

Biomedical subjects

L Koutny

Publications and source records attributed to L Koutny.

10 recordsLinked to original sources
PubMed2001

Recent advances in DNA sequencing by capillary and microdevice electrophoresis.

A number of significant improvements in the electrophoretic performance and design of DNA sequencing devices have culminated in the introduction of truly industrial grade production scale instruments. These instruments have been the workhorses behind the massive increase in genomic sequencing data available in public and private databases. We highlight the recent progress in aspects of capillary electrophoresis (CE) that has enabled these achievements. In addition, we summarize recent developments in the use of microfabricated devices for DNA sequencing that promise to bring the next leap in productivity.

Electrophoresis, Capillary↗
PubMed2000

Optimization of high-performance DNA sequencing on short microfabricated electrophoretic devices.

We have examined the parametric performance of short microfabricated electrophoresis devices that operate with a replaceable linear poly(acrylamide) (LPA) solution for the application of DNA sequencing. A systematic study is presented of the dependence of selectivity, separation efficiency, and resolution of sequencing fragments on buffer composition, LPA concentration, LPA composition, microdevice temperature, electric field, and device length. A specific optimization is made for DNA sequencing on 11.5-cm devices. Using a separation matrix composed of 3.0% (w/w) 10 MDa plus 1.0% (w/w) 50 kDa LPA, elevated microdevice temperature (50 degrees C), and 200 V/cm, high-speed DNA sequencing of 580 bases on standard M13mp18 was obtained in only 18 min with a base-calling accuracy of 98.5%. Read lengths of 640 bases at 98.5% accuracy were achieved in approximately 30 min by reducing the electric field strength to 125 V/cm. We believe that this constitutes matrix-limited performance for microdevices of this length using LPA sieving matrix and this buffer chemistry. In addition, it was confirmed, that shorter devices are rather impractical for production sequencing applications when LPA is used as sieving matrix.

Base Sequence↗
PubMed2000

Eight hundred-base sequencing in a microfabricated electrophoretic device.

The human genome will be sequenced using capillary array electrophoresis technology. Although currently achieving only 550 base reads per run, capillary arrays have increased the efficiency and lowered the cost of sequencing by eliminating gel plate preparation, reducing sample volumes, and offering automation and speed. However, much higher throughput and greater cost reductions are needed. The next major advancement in sequencing technology is expected from the development of arrays of microfabricated channels in a plate or "chip" format. For de novo sequencing, the practical utility of the microdevice approach has been limited by device length to a read of 500-600 bases per run. We demonstrate a significant milestone for a microfabricated device by obtaining an average read length of 800 bases in 80 min (98% accuracy) for either M13 standards or DNA sequencing samples from the Whitehead Institute Center for Genomic Research (WICGR) production line. This result is achieved in 40-cm-long channels using a new class of large-scale microfabricated devices. Both microfabrication of extended structures and achievement of long reads are essential steps toward a 384-lane very-large-scale microfluidic (VLSMF) system for ultrahigh-throughput DNA sequencing analysis, currently under construction in our laboratory.

Base Sequence↗
PubMed2000

Microchip electrophoresis: a method for high-speed SNP detection.

As a trial practical application, we have applied optimized microfabricated electrophoresis devices, combined with enzymatic mutation detection methods, to the determination of single nucleotide polymorphism (SNP) sites in the p53 suppressor gene. Using clinical samples, we have achieved robust assays with quality factors as good as conventional electrophoresis in approximately 100 s. This is 10 and 50 times faster than capillary and slab gel electro-phoresis, respectively. The method was highly accurate with an average error of mutation site measurement of only +/-5 bp. No clean-up of the digestion mixtures was needed prior to injection. This greatly simplifies sample handling relative to capillary instruments, which is important for high-throughput screening applications. Following identification, absolute mutation determination of the screened samples was achieved in a second microdevice optimized for four-color DNA sequencing. Total run time was 25 min in this second device and sequencing data were in full agreement with ABI Prism 377 sequencing runs which required 3.5 h. The tandem application of microdevices for location then full characterization of SNPs appears to confirm many of the improvements claimed for future application of microdevices in practical scaled screening for mutational analysis.

DNA Mutational Analysis↗
PubMed1999

Two-color multiplexed analysis of eight short tandem repeat loci with an electrophoretic microdevice.

Single-channel microfabricated electrophoretic devices equipped with a dual-wavelength laser-induced fluorescence detection system were used for the fast analysis of an eight-loci, two-color multiplex short tandem repeat (STR) system for human identification. Routine analyses of the eight loci (CSF1PO, TPOX, TH01, vWA and D16S539, D7S820, D13S317, D5S818), requiring four-base resolution, were performed in only 2 min. Specific analyses for a microvariant allele (allele 9.3 of the TH01 locus) demanded single-base resolution and was performed in less than 10 min. The high accuracy of the microdevice for real-world STR sample analyses was demonstrated by comparison with conventional slab-gel electrophoresis. Our results show that a fast multiwavelength multichannel electrophoretic microsystem will be capable of routinely processing thousands of complex STR samples per day.

Color↗
PubMed1999

Recent developments in DNA sequencing by capillary and microdevice electrophoresis.

The present review covers papers published in the years 1997 and 1998 on DNA sequencing by capillary and microdevice electrophoresis. The article does not include other electrophoretic DNA applications such as analysis of oligonucleotides, genotyping, and mutational analysis. Capillary gel electrophoresis (CGE) is starting to become a viable competitor to slab gel electrophoresis for DNA sequencing. Commercially available multicapillary array sequencers are now entering sequencing facilities which to date have totally relied on traditional slab gel technology. CGE research on DNA sequencing therefore becomes increasingly concerned with the critical task of fine-tuning the operational parameters to create robust sequencing systems. Electrophoretic microdevices are being considered the next technological step in DNA sequencing by electrophoresis.

Coloring Agents↗
PubMed1999

Toward real-world sequencing by microdevice electrophoresis.

We report results using a microdevice for DNA sequencing using samples from chromosome 17, obtained from the Whitehead Institute Center for Genome Research (WICGR) production line. The device had an effective separation distance of 11.5 cm and a lithographically defined injection width of 150 microm. The four-color raw data were processed, base-called by the sequencing software Trout, and compared to the corresponding ABI 377 sequence from WICGR. With a criteria of 99% accuracy, we achieved average continuous reads of 505 bases in 27 min with 3% linear polyacrylamide (LPA) at 150 V/cm, and 460 bases in 22 min with 4% LPA at 200 V/cm at a temperature of 45 degrees C. In the best case, up to 565 bases could be base-called with the same accuracy in <25 min. In some instances, Trout allowed for accurate base-calling down to a resolution R as low as R = 0.35. This may be due in part to the high signal-to-noise ratio of the microdevice. Unlike many results reported on capillary machines, no additional sample cleanup other than ethanol precipitation was required. In addition, DNA fragment biasing (i.e., discrimination against larger fragments) was reduced significantly through the unique sample injection mechanism of the microfabricated device. This led to increased signal strength for long fragments, which is of great importance for the high performance of the microdevice.

Base Sequence↗
PubMed1998

DNA sequencing on microfabricated electrophoretic devices.

We present a model that quantitatively describes the performance of microfabricated electrophoretic devices filled with linear polyacrylamide as replaceable sieving material for single-stranded DNA analyses. The dependence of resolution on various separation parameters such as selectivity, diffusion, injector size, device length, and channel folding was investigated. A previously predicted dependence of longitudinal diffusion coefficient on electric field strength has been verified. We have used this model to develop and optimize microfabricated electrophoretic devices for DNA analyses. For single-color DNA sequencing mixtures, we routinely achieve separations of 400 bases in under 14 min at 200 V/cm, and separation of 350 bases in only 7 min at 400 V/cm, with a minimum resolution of R = 0.5. Our results also indicate reduced fragment biasing and efficient sample stacking for DNA sample loading on microfabricated devices.

Acrylic Resins↗
PubMed1997

DNA typing in thirty seconds with a microfabricated device.

We report the development of a practical ultrafast allelic profiling assay for the analysis of short tandem repeats (STRs) by using a highly optimized microfluidic electrophoresis device. We have achieved baseline-resolved electrophoretic separations of single-locus STR samples in 30 sec. Analyses of PCR samples containing the four loci CSF1PO, TPOX, THO1, and vWA (abbreviated as CTTv) were performed in less than 2 min. This constitutes a 10- to 100-fold improvement in speed relative to capillary or slab gel systems. The separation device consists of a microfabricated channel 45 micron x 100 micron in cross section and 26 mm in length, filled with a replaceable polyacrylamide matrix operated under denaturing conditions at 50 degrees C. A fluorescently labeled STR ladder was used as an internal standard for allele identification. Samples were prepared by standard procedures and only 4 microl was required for each analysis. The device is capable of repetitive operation and is suitable for automated high-speed and high-throughput applications.

DNA↗