PubMed Health⌕ Search

Biomedical subjects

L Lazzeri

Publications and source records attributed to L Lazzeri.

9 recordsLinked to original sources
PubMed2006

Morphological features of ovine embryonic lung fibroblasts cultured on different bioactive scaffolds.

Tissue regeneration with autologous cell transplantation is one of the most important goals in clinical research. In this field, the development of bioactive materials that provide microenvironments for cell-matrix interactions mimicking biological conditions is required. In recent years, many synthetic materials have been developed as scaffolds and many procedures for the surface modification of these materials have been applied using biological molecules. In this study, we analyzed the morphology and the molecule production by ovine embryonic lung fibroblasts cultured on three different sponge-like matrices based on poly(L-lactic acid) (PLLA): agarose/PLLA, crosslinked and uncrosslinked gelatin/PLLA. The matrices were produced by using an emulsion freeze-drying method leading to the formation of sponge-like materials with high porosity and with interconnection between the pores. In vitro MTT test demonstrated that transplanted cells were viable and metabolically active. Morphological analysis revealed that fibroblasts adhered to and penetrated the polymeric structures. Moreover, all the different matrices supported fibroblast production of proteoglycans, glycoproteins, and matrix molecules such as elastin, collagen I, and fibronectin. These data suggest that the tested bioactive scaffolds may support the growth and extracellular matrix molecule production of fibroblasts allowing in vitro connective tissue regeneration.

Animals↗
PubMed2001

Bioartificial polymeric materials based on polysaccharides.

Bioartificial polymeric materials, based on blends of polysaccharides with synthetic polymers such as poly(vinyl alcohol) (PVA) and poly(acrylic acid) (PAA), were prepared as films or hydrogels. The physico-chemical, mechanical, and biological properties of these materials were investigated by different techniques such as differential scanning calorimetry, dynamic mechanical thermal analysis, scanning electron microscopy, and in vitro release tests, with the aim of evaluating the miscibility of the polymer blends and to establish their potential applications. The results indicate that while dextran is perfectly miscible with PAA, dextran/PVA, chitosan/PVA, starch/PVA, and gellan/PVA blends behave mainly as two-phase systems, although interactions can occur between the components. Cross-linked starch/PVA films could be employed as dialysis membranes: they showed transport properties comparable to, and in some cases better than, those of currently used commercial membranes. Hydrogels based on dextran/PVA and chitosan/PVA blends could find applications as delivery systems. They appeared able to release physiological amounts of human growth hormone, offering the possibility to modulate the release of the drug by varying the content of the biological component.

Biocompatible Materials↗
PubMed1996

Surface characterisation of collagen-based bioartificial polymeric materials.

An electron spectroscopy for Chemical Analysis (ESCA) characterization of films based on collagen-poly(vinylalcohol) blends, cross-linked by dehydrothermal treatment is reported. The semiquantitative analysis indicates a remarkable enrichment of collagen in the surface with respect to its initial percentage utilized to prepare the blends.

Animals↗
PubMed1995

Bioartificial materials based on collagen: 1. Collagen cross-linking with gaseous glutaraldehyde.

The effect of exposure time of thin films of soluble collagen to glutaraldehyde (GTA) vapour was studied at 37 degrees C, and was evaluated by examining the thermal and biological stability and the swelling ratio. It was found that the collagen films treated with GTA vapour for 18 h showed the highest denaturation temperature, the lowest swelling ratio, and an enhanced proteolytic stability. This study shows that soluble collagen can be effectively cross-linked with GTA vapour and that the degree of cross-linking can be controlled by varying the exposure time.

Animals↗
PubMed1995

Bioartificial materials based on collagen: 2. Mixtures of soluble collagen and poly(vinylalcohol) cross-linked with gaseous glutaraldehyde.

Thin films of both pure soluble collagen (CLG) and poly(vinylalcohol) (PVA) and mixtures of the two, ranging from 20-80% PVA composition were studied to test the effects of PVA content and of glutaraldehyde vapour cross-linking. Both the thermal and mechanical behavior and, in addition, proteolytic stability were clearly influenced by the ratio of CLG/PVA. The experimental results indicate that no thermodynamic compatibility occurs between the two homopolymers. However, there is evidence that strong interactions, probably due to hydrogen bond formation, occur between the biological and synthetic polymers. The interactions appear stronger in those films with a lower PVA content and which were not cross-linked. Both the thermal and biological stability are increased and there is an improvement of the mechanical properties. The mutual intermolecular influence appears to allow the attainment of a good mechanical compatibility between CLG and PVA.

Animals↗
PubMed1994

Collagen-based new bioartificial polymeric materials.

Bioartificial polymeric materials, based on blends of biological and synthetic polymers, have been proposed as new materials for applications in the biomedical field. They should usefully combine the biocompatibility of the biological component with the physical and mechanical properties of the synthetic component. Blends of collagen with either poly(vinyl alcohol) or poly(acrylic acid) have been prepared by mixing aqueous solutions of the two polymers. Differential scanning calorimetry and dynamic mechanical thermal analysis has been carried out to investigate the miscibility properties of the polymers and the mechanical behaviour of the blends.

Acrylic Resins↗
PubMed1993

The activation of human plasma prekallikrein as a hemocompatibility test for biomaterials. II. Contact activation by EVAL and EVAL-SMA copolymers.

The activation of human plasma prekallikrein (PKK) to kallikrein (KK), induced by the contact of blood with foreign materials, is a useful in vitro hemocompatibility test. Kallikrein is easily detected by its reaction with the chromogenic substrate H-D-Pro-Phe-Arg-pNA, which releases p-nitroaniline, revealed by its absorption at 405 nm. This test, which was already carried out by evaluating PKK activation by the 'end-point' method, has been carried out in this work by the more accurate 'initial velocity' method, i.e. by evaluating the activation from the initial rates of the KK-substrate reaction. The tests were carried out on the following materials: borosilicate glass (as a high-activation reference material), silicone (as a low-activation reference material), the commercial biomaterial Cardiothane 51, three graft copolymers synthesized in our laboratory by reacting ethylene-vinyl alcohol copolymer (EVAL) with styrene-maleic anhydride copolymer (SMA), and EVAL itself. A mathematical treatment based on a simple kinetic model has been used for a first-approximation evaluation of the PKK-activating power of the materials tested. The quite low activating power of the EVAL-SMA copolymers, which are easily processable into water-permeable hollow fibers, suggests the possibility of their use in blood dialyzers.

Amino Acid Sequence↗