PubMed Health⌕ Search

Biomedical subjects

L Louvel

Publications and source records attributed to L Louvel.

3 recordsLinked to original sources

Excess sludge reduction in activated sludge processes by integrating biomass alkaline heat treatment.

With new EC regulations, alternative treatment and disposal techniques of the excess sludge produced by activated sludge wastewater treatment plants have to be developed. To decrease activated sludge production yield, microbial cell lysis can be amplified to enhance cryptic growth (biomass growth on lysates). Cell breakage techniques (thermal, alkaline and a combination) were studied to generate Ralstonia eutropha (strain model) and waste activated sludge lysates and to evaluate their biodegradability. Gentle treatment conditions by alkaline waste treatment (20 min at 60 degrees C and pH 10 by NaOH addition) allowed waste activated sludge to be solubilized by a two step process (instantaneous and post-treatment) giving a dissolved organic carbon released by the total suspended solids treated of 267 mgDOC x g(-1)TSS. The biodegradation of the soluble fraction of the lysates by fresh sludge reached 75 and 90% after 48 and 350 hrs of incubation respectively. A validation on a laboratory scale by insertion of a liquor alkaline heat treatment loop in a biological synthetic wastewater treatment process was carried out. A reduction of 37% of the excess sludge was obtained without altering the purification yield of the process.

Biodegradation, Environmental↗

Towards a reduction in excess sludge production in activated sludge processes: biomass physicochemical treatment and biodegradation.

To decrease activated sludge production, microbial cell lysis can be amplified to enhance cryptic growth (biomass growth on lysates). Cell breakage techniques (thermal, alkaline, acid) were studied to generate Alcaligenes eutrophus and sludge lysates and to evaluate their biodegradability. Gentle treatment conditions produced the best results. Complete cell deactivation was obtained for temperatures higher than 55 degrees C. The release kinetics were similar for temperatures varying from 60 degrees C to 100 degrees C. A 20-min incubation was suitable for reaching 80% of the maximum releasable carbon. In thermal-chemical hydrolysis, NaOH was the most efficient for inducing cell lysis. Carbon release was a two-step process. First an immediate release occurred, which was of the same order of magnitude for A. eutrophus and sludge [100-200 mg dissolved organic C (DOC) g total suspended solids (TSS)-1], followed by a post-treatment release. The second step was virtually equivalent to the first for sludge, and weaker for A. eutrophus (< 50 mg DOC g TSS-1). The biodegradability of the soluble fraction, both the immediate and the post-treatment carbon release, was investigated. The optimal degradation yield, obtained with sludge cells, reached 55% after 48 h of incubation and 80% after 350 h. The most consistent lysis and biodegradation results occurred at pH 10 and 60 degrees C after a 20-min incubation.

Alcaligenes↗

Physiological investigations by image analysis.

Modern quantitative image analysis has been extensively used to characterize the morphology of microorganisms, especially those of the filamentous type. More recently physiological features have been quantified, making use of classical stains as well as fluorescent dyes. The potential of the technique is illustrated by a detailed analysis of the differentiation of Streptomyces ambofaciens. Three different staining procedures have been used to monitor the thinning and septation of hyphae (with propidium iodide staining), the leakage of cellular components through the membrane (with carbol gentian violet staining) and the respiration (with INT staining) in a batch submerged culture.

Gentian Violet↗