PubMed Health⌕ Search

Biomedical subjects

L Makowski

Publications and source records attributed to L Makowski.

17 recordsLinked to original sources
PubMed1992

Construction of a microphage variant of filamentous bacteriophage.

The intergenic region in the genome of the Ff class of filamentous phage (comprising strains fl, fd and M13) genome constitutes 8% of the viral genome, and has essential functions in DNA replication and phage morphogenesis. The functional domains of this region may be inserted into separate sites of a plasmid to function independently. Here, we demonstrate the construction of a plasmid containing, sequentially, the origin of (+)-strand synthesis, the packaging signal and a terminator of (+)-strand synthesis. When host cells harboring this plasmid (pLS7) are infected with helper phage they produce a microphage particle containing all the structural elements of the mature, native phage. The microphage is 65 A in diameter and about 500 A long. It contains a 221-base single-stranded circle of DNA coated by about 95 copies of the major coat protein (gene 8 protein).

Bacteriophage M13↗
PubMed1992

Helical structure of P pili from Escherichia coli. Evidence from X-ray fiber diffraction and scanning transmission electron microscopy.

The structure of the P pili from Escherichia coli has been studied using X-ray fiber diffraction and scanning transmission electron microscopy (STEM). Analysis of the fiber diffraction data indicates that the pili are constituted largely of structural subunits arranged helically with approximately 33 subunits in 10 turns in an axial repeat of 244.5 +/- 1.8 A. Radial electron density distributions calculated from equatorial diffraction data and STEM data indicate that the pili are about 65 A in diameter with a small central cavity roughly 15 A across. The principal protein component of the pili is PapA, which has a molecular weight of 16.5 kDa. Assuming that each subunit consists of a single PapA molecule, the mass-per-unit-length of the pili predicted from the X-ray data is 2.23 kDa/A. Measurements of mass-per-unit-length were also made through the analysis of STEM images. These measurements indicate a value of 2.13 +/- 0.14 kDa/A. STEM images demonstrated the presence of thin, thread-like structures emerging from the ends of pili and spanning breaks in the pili structure. These structures, which have been observed under other conditions, have been termed fibrillae. In the STEM images the fibrillae appear about 20 A in diameter. The mass-per-unit-length of the fibrillae was estimated using the STEM data to be 0.4 kDa/A. These data are consistent with the fibrillae representing an unwound or unraveled form of the pili proteins overstretched to about five times the length they would have in the intact pili.

Bacterial Proteins↗
PubMed1992

Terminating a macromolecular helix. Structural model for the minor proteins of bacteriophage M13.

Analysis of the results of X-ray diffraction, electron microscopy and s sequence studies of filamentous bacteriophage M13 are used to construct structural models for the minor proteins gp7 and gp9 at the end of the virus assembled first, and a portion of gp6 at the end of the virus that binds host. Comparison of the sequence of the major coat protein, gp8, with those of gp7, gp9 and gp6 indicates that significant portions of these three proteins have sequences similar to that of gp8. Assuming that sequence similarity is indicative of structural similarity, gp7, gp9 and portions of gp6 are modeled based on what is known about the structure of gp8. These molecular models are analyzed to predict the packing of the minor proteins with the terminal gp8 proteins (the last gp8 proteins at either end of the helix). This analysis indicates that the gp8 proteins integrated into the virus first may have a structure distinct from those in the body of the virus particle. The gp8 proteins at the end assembled last appear to have a conformation very similar to that of the integral coat proteins. These models place specific constraints on models for the process of viral assembly.

Amino Acid Sequence↗
PubMed1992

Three-dimensional structure of a cloning vector. X-ray diffraction studies of filamentous bacteriophage M13 at 7 A resolution.

Filamentous bacteriophage M13 is a single-stranded DNA phage about 65 A in diameter and 9300 A long. X-ray diffraction studies of magnetically oriented fibers of native, mercury and iodine-labeled phage particles have been used to determine the arrangement of the major coat protein, the gene 8 product, in the virion. The coat protein is made up of a single gently curving alpha-helix extending from approximately Pro6 to near the carboxyl terminus. The axis of the alpha-helix is tilted about 20 degrees from the viral axis and wraps around the axis in a right-handed helical sense. The surface of the virus is made up largely of polar residues in the amino-terminal half of the protein including the segment of alpha-helix extending from Pro6 to Tyr24. The interior surface of the protein coat faces the DNA and consists of an amphipathic helical segment extending from Thr36 to Ser50. The alpha-helices form a tightly packed 15 to 20 A thick cylindrical coat around the DNA. This structural model provides insight into the potential sites for incorporating foreign protein domains that may act as functional binding sites on the surface of M13.

Amino Acid Sequence↗
PubMed1992

Structural polymorphism correlated to surface charge in filamentous bacteriophages.

Fiber diffraction studies are used to demonstrate that changes in the helical symmetry of the protein coat of filamentous bacterial viruses fd and M13 are correlated with changes in the surface charge. Comparison of the structure of M13 and fd at pH 2 and 8 indicate that surface charge affects both the helical symmetry and flexibility of the virions. The changes in helical symmetry are similar in magnitude to that observed in the Pseudomanas phage Pf1 and probably reflect an inocuous side effect of the particle flexibility required for protection of the virus particles from damage due to shear. The magnitude of the observed changes in helical symmetry appears to be limited to that which can occur without repacking of the interfaces between the alpha-helices making up the viral protein coat.

Bacteriophages↗
PubMed1991

Neutron diffraction studies of the structure of filamentous bacteriophage Pf1. Demonstration that the coat protein consists of a pair of alpha-helices with an intervening, non-helical surface loop.

The structure of filamentous bacteriophage Pf1 has been studied using neutron diffraction from magnetically oriented gels of native and specifically deuterated phage. These methods have been used to determine the positions of the two methionine, two tyrosine and six isoleucine residues of the coat protein. Combined with the positions of the five valine residues previously determined, they represent one third (15 of 46) of the residues of the coat protein. These 15 amino acid residue positions have been used as the basis for constructing a model for the protein consisting of two alpha-helices with an intervening surface loop. The first helix extends from near the amino terminus to Ile12. The second helix extends from Lys20 to at least Met42, and may contain a bend between Ile32 and Val35. The two helices are tilted by about 15 degrees relative to one another, and are positioned in such a way that they appear to be bound end-to-end by main-chain hydrogen bonds. The intervening, non-helical loop, made up of Thr13 to Met19, connects the two helices without disrupting the pattern of main-chain hydrogen bonding, but does not result in a bend in the otherwise continuous helical structure. This model is used to predict the approximate positions of all amino acid residues in the Pf1 protein coat, providing a basis for further understanding of a number of viral properties including the symmetry transitions, the non-isomorphism of heavy-atom derivatives, and the protein-protein and protein-DNA interactions in the virion.

Amino Acid Sequence↗
PubMed1991

Membrane-mediated assembly of filamentous bacteriophage Pf1 coat protein.

Filamentous bacteriophage Pf1 assembles by a membrane-mediated process during which the viral DNA is secreted through the membrane while being encapsulated by the major coat protein. Neutron diffraction studies showed that in the virus most of the coat protein consists of two alpha-helical segments arranged end-to-end with an intervening mobile surface loop. Nuclear magnetic resonance studies of the coat protein in the membrane-bound form have shown that the secondary structure is essentially identical to that in the intact virus. A comparison indicates that during membrane-mediated viral assembly, while the secondary structure of the coat protein is largely conserved, its tertiary structure changes substantially.

Bacteriophages↗
PubMed1988

Conformation of the coat protein of filamentous bacteriophage Pf1 determined by neutron diffraction from magnetically oriented gels of specifically deuterated virions.

The structure of filamentous bacteriophage Pf1 has been studied using neutron diffraction from magnetically oriented gels of native and valine-deuterated phage. Neutron diffraction intensities were measured to approximately 8 A resolution along the equator and first six layer-lines, and differences due to the deuterated valine residues were apparent. Analysis of equatorial data indicate that one valine residue is located at a radius of about 13 A, three are in the hydrophobic center of the protein coat at an average of about 22 A radius, and one is near the outer surface of the virion at about 28 A radius. Analysis of the three-dimensional data was initiated using the rod model for the alpha-helices of the coat protein derived from earlier X-ray diffraction studies. This model was refined against the neutron diffraction intensities from native phage to obtain a phase set that was used to calculate a difference map between the valine-deuterated and native phage. The difference map exhibits peaks that correspond to the positions of the five valine residues in the coat protein. From the amino acid sequence and the alpha-helical conformation of the coat protein, the five valine residues can be unambiguously assigned to the difference peaks. This assignment indicates that the two alpha-helices of the coat protein are parallel to one another, connected by a short stretch of non-helical peptide. The valine positions also indicate that the helical surface lattice of the phage particle is right-handed.

Amino Acid Sequence↗
PubMed1987

Structural responsiveness of filamentous bacteriophage Pf1: comparison of virion structure in fibers and solution. The effect of temperature and ionic strength.

X-ray diffraction from fibers and magnetically oriented solutions has been used to study the effect of changes in environment on the helical symmetry and radial structure of the Pf1 virus particle. Detailed analysis of equatorial scattering to a spacing of 8-10 A was used to identify small radial motions of structural elements in the virus particle. R-factor ratios were used to determine the statistical significance of observed changes. Comparison of the structure of virus particles in fibers with those in solution indicated that the helical symmetry of the virions remains unchanged during fiber formation. In most fibers the virions appear to be slightly distorted by the tight packing of virus particles. This distortion results in an apparent increase in the radius of the virus particle of approximately 0.6 A. A change in the radius of the DNA is also observed. Increase in the concentration of solvent molecules during fiber formation results in penetration of the virus interior by some solvent components. NaCl is also able to enter the virus interior. The change in the helical symmetry of the virions at approximately 8 degrees C appears to be the same whether observed by diffraction from fibers or from solutions. Only subtle changes in radial structure are associated with the temperature transition.

Coliphages↗
PubMed1987

Twisting of fibrin fibers limits their radial growth.

Electron microscopy of freeze-dried, shadowed fibrin fibers has demonstrated that these structures are twisted. The pitch and radius of many fibers were measured from the micrographs. Although there is some variability, the average pitch of 1930 +/- 280 (SD) nm is independent of radius. The distribution of observed radii of fibers assembled in vitro is highly skewed, suggesting that individual fibers grow to a maximum radius of about 50 nm, except when both pH and ionic strength are high; fibers aggregate to form thicker fiber bundles under some conditions. The observed twisting may be responsible for limiting the lateral growth of individual fibers. Protofibrils near the surface of a twisted fiber are stretched relative to those near the center. Consequently, the degree to which a protofibril can be stretched limits the radius of a fiber; protofibrils can be added to a growing fiber until the energy required to stretch an added protofibril exceeds the energy of binding. These properties of assembly arise directly from the intrinsic twist of the fibrinogen molecule determined from structural evidence. Simple geometric considerations lead to conclusions regarding the locations of the binding sites for assembly of the protofibril and the flexibility of the fibrin molecule.

Biophysical Phenomena↗
PubMed1986

Polymorphism of sickle cell hemoglobin aggregates: structural basis for limited radial growth.

Fibers composed of molecules of deoxygenated sickle cell hemoglobin are the basic cause of pathology in sickle cell disease. The hemoglobin molecules in these fibers are arranged in double strands that twist around one another with a long axial repeat. These fibrous aggregates exhibit a pattern of polymorphism in which the ratio of their helical pitch to their radius is approximately constant. The observed ratio agrees with an estimate of its value calculated from the geometric properties of helical assemblies and the degree of distortion that a protein-protein interface can undergo. This agreement indicates that the radius of an aggregate is limited by the maximum possible stretching of double strands. The geometric properties limiting the radial extent of sickle hemoglobin fibers are fundamental to all cables of protein filaments and could contribute to the control of diameter in other biological fibers such as collagen or fibrin.

Actin Cytoskeleton↗
PubMed1986

X-ray diffraction from magnetically oriented solutions of macromolecular assemblies.

A simple system was developed for obtaining x-ray diffraction patterns from magnetically oriented solutions of macromolecular assemblies. A small permanent magnet was designed that produces a magnetic field of 16 kilogauss in a volume of 1 cubic millimeter and is mountable on most x-ray cameras. Many subcellular structures have sufficient diamagnetic anisotropy that they exhibit orientation in dilute solution when placed between the poles of the magnet. Diffraction from solutions oriented in this magnet can provide substantially more structural information than small-angle scattering from isotropic solutions. In favorable cases, such as dilute solutions of filamentous bacteriophages, it is possible to produce oriented fiber diffraction patterns from which intensities along layer lines can be measured to 7-angstrom resolution. The magnetically induced birefringence observed in solutions of other macromolecular assemblies suggests that this technique may have broad applicability to subcellular structures.

Bacteriophages↗
PubMed1977

Gap junction structures. I. Correlated electron microscopy and x-ray diffraction.

X-ray crystallographic methods and electron microscope image analysis have been used to correlate the structure and the chemical composition of gap junction plaques isolated intact from mouse liver. The requirement that the interpretations of X-ray, electron microscope, and chemical measurements be consistent reduces the uncertainties inherent in the separate observations and leads to a unified picture of the gap junction structures. Gap junctions are built up of units called connexons that are hexagonally arrayed in the pair of connected cell membranes. X-ray diffraction and electron microscope measurements show that the lattice constant of this array varies from about 80 to 90 A. Analysis of electron micrographs of negatively stained gap junctions shows that there is significant short range disorder in the junction lattice. even though the long range order of the array is remarkably regular. Analysis of the disorder provides information about the nature of the intermolecular forces that hold the array together.

Animals↗
PubMed1977

Gap junction structures. II. Analysis of the x-ray diffraction data.

Models for the spatial distribution of protein, lipid and water in gap junction structures have been constructed from the results of the analysis of X-ray diffraction data described here and the electron microscope and chemical data presented in the preceding paper (Caspar, D. L. D., D. A. Goodenough, L. Makowski, and W.C. Phillips. 1977. 74:605-628). The continuous intensity distribution on the meridian of the X-ray diffraction pattern was measured, and corrected for the effects of the partially ordered stacking and partial orientation of the junctions in the X-ray specimens. The electron density distribution in the direction perpendicular to the plane of the junction was calculated from the meridional intensity data. Determination of the interference function for the stacking of the junctions improved the accuracy of the electron density profile. The pair-correlation function, which provides information about the packing of junctions in the specimen, was calculated from the interference function. The intensities of the hexagonal lattice reflections on the equator of the X-ray pattern were used in coordination with the electron microscope data to calculate to the two-dimensional electron density projection onto the plane of the membrane. Differences in the structure of the connexons as seen in the meridional profile and equatorial projections were shown to be correlated to changes in lattice constant. The parts of the junction structure which are variable have been distinguished from the invariant parts by comparison of the X-ray data from different specimens. The combination of these results with electron microscope and chemical data provides low resolution three- dimensional representations of the structures of gap junctions.

Animals↗