PubMed Health⌕ Search

Biomedical subjects

L Montanaro

Publications and source records attributed to L Montanaro.

At least 19 recordsLinked to original sources

Dyskerin expression influences the level of ribosomal RNA pseudo-uridylation and telomerase RNA component in human breast cancer.

Dyskerin is a nucleolar protein, altered in dyskeratosis congenita, which carries out two separate functions, both fundamental for proliferating cells. One function is the pseudo-uridylation of ribosomal RNA (rRNA) molecules, necessary for their processing, and the other is the stabilization of the telomerase RNA component, necessary for telomerase activity. A significant feature of dyskeratosis congenita is an increased susceptibility to cancer; so far, however, no data have been reported on dyskerin changes in human tumours. Therefore, in this study, the distribution of dyskerin in a large series of human tumours from the lung, breast, and colon, as well as from B-cell lymphomas, was analysed by immunohistochemistry. Dyskerin proved never to be lost or delocalized outside the nucleolus. A quantitative analysis of dyskerin mRNA expression was then performed in 70 breast carcinomas together with the evaluation of telomerase RNA component levels and rRNA pseudo-uridylation. Dyskerin mRNA levels were highly variable and directly associated with both telomerase RNA component levels and rRNA pseudo-uridylation. Dyskerin gene silencing in the MCF-7 human breast carcinoma cell line reduced telomerase activity and rRNA pseudo-uridylation. Significantly, patients with low dyskerin expression were characterized by a better clinical outcome than those with a high dyskerin level. These data indicate that dyskerin is not lost in human cancers and that the levels of its expression and function are associated with tumour progression.

Breast Neoplasms↗

Emerging Staphylococcus species as new pathogens in implant infections.

The vast use of prosthetic materials in medicine over the last decades has been accompanied by the appearance of new opportunistic pathogens previously considered incapable of causing infections with significant morbidity and/or mortality. In this regard, the genus Staphylococcus enlisting numerous species usually characterized by a saprophytic habit covers a special role. Apart from Staphylococcus aureus and Staphylococcus epidermidis, well known for their large prevalence in implant-related infections, a number of further staphylococcal species are progressively being indicated for their pathogenic potential. The increasing attention on these opportunistic bacteria is due to an ever growing number of clinical reports, which is also deriving from a more accurate identification of these species with currently available techniques. This synopsis intends to offer an overview on recently emerging coagulase-negative staphylococci (CoNS) as well as coagulase-positive/-variable staphylococci exhibiting distinct traits of virulence, pathogenicity, and epidemiologic impact depending among others on the medical field, the type of prosthetic device and its anatomic location.

Communicable Diseases, Emerging↗

Prevalence and antibiotic resistance of 15 minor staphylococcal species colonizing orthopedic implants.

Several species belonging to Staphylococcus genus (non Sau/ non Sep species) exhibit increasing abilities as opportunistic pathogens in colonisation of periprosthesis tissues. Here we report on antibiotic resistance of 193 strains, belonging to non Sau/ non Sep species, consecutively collected from orthopedic implant infections in a period of about 40 months. The 193 strains (representing 17% of all staphylococci isolated) were analysed for their antibiotic resistance to 16 different drugs. Five species turned out more prevalent, ranging from 1 to 5%: S. hominis (4.2%), S. haemolyticus (3.7%), S. capitis (2.7%), S. warneri (2.6%), and S. cohnii (1.6%). Among these, the prevalence of antibiotic resistance to penicillins was similar, ranging from 51% to 66%. Conversely, significant differences were observed for all the remaining antibiotics. For S. haemolyticus the resistances to oxacillin and imipenem, the four aminoglycosides and erythromycin were at least twice that of the other three species which were compared. S. warneri was on the contrary the species with the lowest occurrence of resistant strains. Ten species appeared only rarely at the infection sites: S. lugdunensis, S. caprae, S. equorum, S. intermedius, S. xylosus, S. simulans, S. saprophyticus, S. pasteuri, S. sciuri, and S. schleiferi. The behaviours of these species, often resistant to penicillins, were individually analysed. Differences in both the frequencies and the panels of antibiotic resistances observed among the non Sau/ non Sep species: i) suggest that horizontal spreading of resistance factors, if acting, was not sufficient per se to level their bio-diversities; ii) highlight and confirm the worrisome appearance within the Staphylococcus genus of emerging ""new pathogens"", not homogeneous for their virulence and antibiotic resistance prevalence, which deserve to be recognised and treated individually.

Anti-Bacterial Agents↗

Virulence factors in enterococcal infections of orthopedic devices.

Enterococci are opportunistic pathogens which today represent one of the leading causes of nosocomial infections. We have examined a collection of 52 Enterococcus faecalis isolated from orthopedic infections to determine if they were characterized by a specific pattern of virulence factors. The isolates were evaluated for biofilm formation, presence of genes coding the enterococcal surface protein (esp) and gelatinase (gelE), as well as for gelatinase production. While the rate of esp-positive isolates was comparable to that found among strains from other clinical sources, we found a significantly higher rate of strong biofilm formers and gelatinase producers. Particularly high was the rate of gelE-carrying strains expressing the gene. Data suggest that these two factors in particular may play an important role in enterococcal infections associated with biomaterials.

Biofilms↗

Automated ribotyping to distinguish the different non Sau/ non Sep staphylococcal emerging pathogens in orthopedic implant infections.

Several species belonging to Staphylococcus genus, other than Staphylococcus aureus and Staphylococcus epidermidis (non Sau/ non Sep species), exhibit increasing abilities as opportunistic pathogens in the colonisation of periprosthetic tissues. Consequently, the availability of means for accurate identification is crucial to assess the pathogenic characteristics and to clarify clinical relevance of the individual species. Here, 146 clinical staphylococcal isolates belonging to non Sau/ non Sep species from prosthesis-associated orthopedic infections were analyzed by conventional enzymatic galleries and by automated ribotyping. Twelve different species were recognised: S. capitis, S. caprae, S. cohnii, S. equorum, S. haemolyticus, S. hominis, S. lugdunensis, S. pasteuri, S. sciuri, S. simulans, S. warneri, S. xylosus. Ribotype identifications were compared with the phenotypes obtained by the Api 20 Staph system and/or ID 32 Staph system. ID 32 Staph profiles were more consistent with ribotyping results than Api Staph profiles. Across the different staphylococcal species investigated, correct identifications with Api Staph were 45%, while with ID 32 Staph they were 59%. It has, however, to be mentioned that ID 32 Staph was mostly applied to discriminate unmatched ribotyping and Api Staph identifications, thus to a subpopulation of strains with ""atypical"" metabolic profile. Automated ribotyping provided a correct identification for 91% of the isolates. These results confirm automated ribotyping as a convenient rapid technique, still subject to improvements, which will accurately and rapidly recognise the newly emerging staphylococcal pathogens in implant-related orthopedic infections.

Automation↗

Antibacterial activity of zinc modified titanium oxide surface.

Titanium-based implants are successfully used for various biomedical applications. However, in some cases, e.g. in dental implants, failures due to bacterial colonization are reported. Surface modification is a commonly proposed strategy to prevent infections. In this work, titanium oxide, naturally occurring on the surface of titanium, was modified by promoting the formation of a mixed titanium and zinc oxide, on the basis of the idea that zinc oxide on titanium surface may act as the zinc oxide used in pharmaceutical formulation for its lenitive and antibacterial effects. The present work shows that it is possible to form a mixed titanium and zinc oxide on titanium surfaces, as shown by Scanning Electron Microscopy and XPS analysis. To this end titanium was preactivated by UV on crystalline titanium oxide, both in the anatase form or in the co-presence of anatase and rutile. By performing antibacterial assays, we provide evidence of a significant reduction in the viability of five streptococcal oral strains on titanium oxide surfaces modified with zinc. In conclusion, this type of chemical modification of titanium oxide surfaces with zinc might be considered a new way to reduce the risk of bacterial colonization, increasing the lifetime of dental system applications.

Anti-Bacterial Agents↗

A glance at the role of exotoxins in opportunistic bacterial infections.

The production and the mechanism of action of exotoxins from Staphylococcus aureus, Staphylococcus epidermidis and Pseudomonas aeruginosa are presented. The attack to the immune host's defenses is the main virulence factor of opportunistic bacteria in implant infections, favoring the invasion and colonization of compromised periprosthesis tissues.

Bacterial Infections↗

Study of Staphylococcus aureus adhesion on a novel nanostructured surface by chemiluminometry.

In recent years the progress in the field of nanotechnologies has offered new possibilities to control the superficial features of implant materials down to a nanoscale level. Several studies have therefore tried to explore the effects of nanostructured biomaterial surfaces on the behavior of eukaryotic cells. However, nanotopography could exert an influence also on the behavior of prokaryotic cells, with relevant implications concerning the susceptibility of implant surfaces to infection. Aim of this study was to examine the behavior of Staphylococcus aureus on polyethylene terephthalate (PET) surfaces either cylindrically nanostructured (PET-N) or flat ion-etched (PET-F), and on tissue culture-grade polystyrene (PS). Microbial adherence was assessed by chemiluminometry under 4 different conditions: (a) bacteria suspended in MEM medium, (b) bacteria in MEM supplemented with 10% fetal bovine serum (FBS), (c) test surfaces preconditioned in FBS, and (d) post-exposure of colonised surfaces to serum-supplemented MEM. Under all circumstances, PET-F and PET-N specimens showed identical bacterial adhesion properties. In the absence of serum, all 3 test materials showed a very high adhesivity to microbial cells and both PET surfaces exhibited greater adhesion than PS. On the contrary, the presence of 10% serum in solution significantly affected cell behavior: the number of microbial cells on all surfaces was drastically reduced, and the adhesion properties of PET surfaces with respect to PS were reversed, with PET being less adhesive. Overall, the specific cylindrical nanostructures created on PET did not significantly influence microbial behavior. Ongoing studies are verifying whether other nanotopographies with different geometry could have more substantial effects.

Bacterial Adhesion↗

No genotoxicity of a new nickel-free stainless steel.

Stainless steel is a metallic alloy largely employed in orthopedics, maxillofacial surgery and orthodontic therapy. However, the presence in its composition of a high quantity of nickel, an agent known to trigger toxic, allergic and cancerogenous responses in humans, is cause of some concern. In this study, we have investigated the in vitro mutagenicity and genotoxicity of a new nickel-free stainless steel, namely P558, in comparison to the conventional stainless steel AISI 316L. The cytogenetic effects were evaluated by studying the frequency of Sister Chromatid Exchanges (SCE) and chromosomal aberrations. Ames test was performed to detect the mutagenic activity. Both P558 and AISI 316L did not cause any significant increase in the average number of SCE and in chromosomal aberrations, either with or without metabolic activation. Furthermore, the Ames test showed that the extracts of both P558 and of AISI 316L are not mutagenic. Overall, these findings prove that P558 is devoid of genotoxicity and mutagenicity. The present results, together with other previous interesting observations that P558 promotes osseointegration, suggest that this new nickel-free stainless steel can represent a better alternative to other conventional steel alloys.

Animals↗

Biofilm in implant infections: its production and regulation.

A significant proportion of medical implants become the focus of a device-related infection, difficult to eradicate because bacteria that cause these infections live in well-developed biofilms. Biofilm is a microbial derived sessile community characterized by cells that are irreversibly attached to a substratum or interface to each other, embedded in a matrix of extracellular polymeric substances that they have produced. Bacterial adherence and biofilm production proceed in two steps: first, an attachment to a surface and, second, a cell-to-cell adhesion, with pluristratification of bacteria onto the artificial surface. The first step requires the mediation of bacterial surface proteins, the cardinal of which is similar to S. aureus autolysin and is denominated AtlE. In staphylococci the matrix of extracellular polymeric substances of biofilm is a polymer of beta-1,6-linked N-acetylglucosamine (PIA), whose synthesis is mediated by the ica operon. Biofilm formation is partially controlled by quorum sensing, an interbacterial communication mechanism dependent on population density. The principal implants that can be compromised by biofilm associated infections are: central venous catheters, heart valves, ventricular assist devices, coronary stents, neurosurgical ventricular shunts, implantable neurological stimulators, arthro-prostheses, fracture-fixation devices, inflatable penile implants, breast implants, cochlear implants, intraocular lenses, dental implants. Biofilms play an important role in the spread of antibiotic resistance. Within the high dense bacterial population, efficient horizontal transfer of resistance and virulence genes takes place. In the future, treatments that inhibit the transcription of biofilm controlling genes might be a successful strategy in inhibiting these infections.A significant proportion of medical implants become the focus of a device-related infection, difficult to eradicate because bacteria that cause these infections live in well-developed biofilms. Biofilm is a microbial derived sessile community characterized by cells that are irreversibly attached to a substratum or interface to each other, embedded in a matrix of extracellular polymeric substances that they have produced. Bacterial adherence and biofilm production proceed in two steps: first, an attachment to a surface and, second, a cell-to-cell adhesion, with pluristratification of bacteria onto the artificial surface. The first step requires the mediation of bacterial surface proteins, the cardinal of which is similar to S. aureus autolysin and is denominated AtlE. In staphylococci the matrix of extracellular polymeric substances of biofilm is a polymer of beta-1,6-linked N-acetylglucosamine (PIA), whose synthesis is mediated by the ica operon. Biofilm formation is partially controlled by quorum sensing, an interbacterial communication mechanism dependent on population density. The principal implants that can be compromised by biofilm associated infections are: central venous catheters, heart valves, ventricular assist devices, coronary stents, neurosurgical ventricular shunts, implantable neurological stimulators, arthro-prostheses, fracture-fixation devices, inflatable penile implants, breast implants, cochlear implants, intra-ocular lenses, dental implants. Biofilms play an important role in the spread of antibiotic resistance. Within the high dense bacterial population, efficient horizontal transfer of resistance and virulence genes takes place. In the future, treatments that inhibit the transcription of biofilm controlling genes might be a successful strategy in inhibiting these infections.

Bacterial Adhesion↗

Etiology of implant orthopedic infections: a survey on 1027 clinical isolates.

In spite of the recent achievements derived from modern protocols of prophylaxis, orthopedic surgical infections still remain unacceptably frequent, especially in light of the often devastating outcomes of septic complications. The spectrum and the prevalence of the bacteria most frequently involved in orthopedic infections are here explored, with particular reference to those infections associated to implant biomaterials, which were grouped based on device typology. During a 30 months period (from September 2000 to April 2003), 1027 microbial strains were consecutively isolated from 699 patients undergoing revision surgery at the Rizzoli Orthopedic Institute. 775 (75.5%) of all these microorganisms were identified as belonging to the Staphylococcus genus, 82 (8%) to the Enterobacteriaceae family, 75 (7.3%) to the Pseudomonas genus, 54 (5.3%) to the Enterococcus genus and 20 (1.9%) to the Streptococcus genus. While confirming the importance of staphylococci as the most diffuse cause of infection, our data indicate an unexpectedly high prevalence of S. epidermidis on infected hip and knee arthroprostheses, respectively of 42% and 44%. The spectrum of bacteria infecting either internal or external fracture fixation devices appears to differ from that of hip and knee arthroprostheses and more closely resembles that of infections non-associated to medical devices, being characterized by a relatively higher prevalence of Staphylococcus aureus (over 40%) and Pseudomonas aeruginosa. Enterobacteriaceae and members of the Streptococcus and Corynebacterium genera are frequently associated with implants in which surgical incisions were made near the perineum, determining a completely altered spectrum.

Bacterial Infections↗

Pathogenesis of implant infections by enterococci.

Enterococci are commensals of human and animal intestinal tract that have emerged in the last decades as a major cause of nosocomial infections of bloodstream, urinary tract and in infected surgical sites. Enterococcus faecalis is responsible for ca. 80% of all enterococcal infections while Enterococcus faecium accounts for most of the others; among the most relevant risk factors for development of enterococcal infections is the presence of implanted devices. The pathogenesis of such infections is poorly understood, but several virulence factors have been proposed. Among them, the ability to form biofilm has recently been shown to be one of the most prominent features of this microorganism, allowing colonization of inert and biological surfaces, while protecting against antimicrobial substances, and mediating adhesion and invasion of host cells and survival within professional phagocytes. Biofilm formation has been shown to be particularly important in the development of prosthetic valve enterococcal endocarditis and stent occlusion. Enterococci are also able to express other surface factors that may support colonization of both inert and biological surfaces, and that may be involved in the invasion of, and survival within, the host cell.

Biofilms↗

Implant infection and infection resistant materials: a mini review.

Implant infection is an aggressive, often irreducible post-surgical infection. It remains the primary cause of implant failure. Bacterial contamination during surgery and subsequent adhesion onto biomaterial surface of opportunistic microorganisms, such as staphylococcal species, exopolysaccharidic slimes or specific adhesins, initiates the implant infection. Pathogenesis of periprosthestic infection is the focus of studies aimed at developing infection resistant materials.

Acute Disease↗

Antibiotic resistance in Staphylococcus aureus and Staphylococcus epidermidis clinical isolates from implant orthopedic infections.

In the last decade the rising phenomenon of resistance to most common antibiotic drugs among staphylococcal clinical isolates has been a reason for serious concern and alarm. The present study investigated the prevalence of antibiotic resistance within a large microbial collection including 530 clinical strains of S. aureus and 408 strains of S. epidermidis to a panel of 16 different drugs. All strains were isolated from orthopedic infections, either associated or non-associated with implant materials. Interestingly, our data show that the profile of the prevalence of antibiotic resistance within the two species of pathogens is extremely similar for the vast majority of the drugs screened. The only statistically significant variations in prevalence concerned, in order of relevance, the following 5 out of 16 antibiotics: sulfamethoxazole (in combination with trimethoprim), erythromycin, and, to a lesser extent, oxacillin, imipenem, and clindamycin. In the case of Staphylococcus aureus, the isolates associated to implant materials were found more frequently resistant to all 4 aminoglycosides screened as well as to ciprofloxacin.

Anti-Bacterial Agents↗

Analysis of virulence factors in cases of enterococcal endocarditis.

Eleven isolates of Enterococcus faecalis causing endocarditis were screened for possible virulence factors with PCR and phenotypic assays. The gene coding for the enterococcal surface protein (esp) was detected in one isolate only, and haemolysin was produced by two isolates. Aggregation substance, biofilm formation and gelatinase were present in seven, nine and eight isolates, respectively. Predisposing factors, particularly hospitalisation and multiple antibiotic therapy, appeared to be more relevant to the development of enterococcal endocarditis following bloodstream infections than the pattern of virulence factors.

Adult↗

Enhanced telomere shortening in transformed lymphoblasts from patients with X linked dyskeratosis.

AIM: Dyskeratosis congenita (DC) is characterised by the failure of those tissues that are rapidly dividing in the adult, particularly the skin, mucosae, and haemopoietic system. The X linked form of the disease is caused by mutations of the DKC1 gene, which encodes dyskerin, a protein that is necessary for the function of telomerase. Cultured DC lymphoblastoid cells are characterised by a reduced expansion of the cell population because of the progressive increase in apoptosis compared with the number of cell divisions. This report aimed to verify whether this is caused by a defect in telomerase function. METHODS: Variations in telomere length over time were evaluated in two cultured lymphoblastoid cell lines derived from patients with X linked DC and control cells derived from a non-affected individual. In addition, the effect of inhibiting poly (ADP-ribose) polymerase (PARP), which is involved in the cellular response to excessive telomere shortening, was assessed. One DC cell line and the control cells were treated with the specific PARP inhibitor 1,5-dihydroxyquinoline (IQ). RESULTS: In DC cells the increase in cell death was associated with progressive telomere shortening, and this was not seen in the control cells. Treatment with IQ delayed the increase of apoptosis in DC cells. CONCLUSIONS: These observations indicate that the reduced expansion that characterises cultured cells obtained from patients with X linked DC is caused by premature telomere shortening.

Apoptosis↗

In vitro effects on MG63 osteoblast-like cells following contact with two roughness-differing fluorohydroxyapatite-coated titanium alloys.

The chances of integration between an implant and the surrounding bone tissue depend on the surface characteristics of the implant itself. Particularly, chemical composition and surface roughness of the material have emerged as crucial factors in affecting the behaviour of cells in contact with the material. Among various surfaces, calcium phosphate coatings seem to favour a rapid initial integration, but their dissolution by extracellular fluids raises some concern about the long-term stability at the bone-implant interface. Fluorinated apatites are known to be more stable than other ceramic coatings, but, at present, little is known on their effects on human cells. In this study, MG63 osteoblast-like cells were seeded onto two fluorohydroxyapatite (FHA)-coated titanium alloy (Ti6Al4V) materials differing in roughness, respectively, LR-FHA (Ra = 5.6 microm) and HR-FHA (Ra = 21.2 microm). Quantification of the cells in contact with the FHA-coated materials by conventional methods involved some technical difficulties, on which we report. Only the indirect esteem by the measure of total content of proteins and a procedure based on cell count, following a double enzymatic treatment to detach the cells, offered plain results, indicating no significant differences between cellular growth in contact with test materials and with plastic control. Differentiation and functionality of the cells were comparatively evaluated by analysis of alkaline phosphatase activity and osteocalcin production. As far as osteocalcin release is concerned, only slight variations were detected on FHA-coated materials in comparison with the control. Both types of coatings showed a significant increase in alkaline phosphatase activity with respect to the control, the roughest surface exhibiting a more prolonged effect on the time.

Alkaline Phosphatase↗

Thymidylate synthase protein expression and activity are related to the cell proliferation rate in human cancer cell lines.

AIMS: To ascertain whether the expression and enzyme activity of thymidylate synthase (TS) are related to the rapidity of cell proliferation in human cancer cell lines. METHODS: Ten asynchronously growing human cancer cell lines of different origin were used, characterised by various doubling times. TS expression was evaluated by western blot analysis using the TS 106 monoclonal antibody. TS activity was determined by the enzyme catalytic assay. The quantitative variation of TS in different phases of the cell cycle was investigated using two parameter flow cytometry for the TS protein and DNA analysis. The number of proliferating cells was evaluated by Ki67 immunostaining. RESULTS: TS expression and activity were significantly related to each other (r = 0.765; p = 0.01) and to the cell doubling time (r = -0.899; p < 0.001 and r = -0.919; p < 0.001, respectively). Ki67 immunolabelling showed no association between the number of cycling cells and TS protein expression and activity. Two parameter flow cytometry indicated that differences of TS expression in the cell lines were not related to the cell cycle phases or to the proportion of S phase cells. CONCLUSIONS: These results show that the expression and activity of the TS protein in asynchronously growing cancer cells are significantly related to the cell doubling time; the faster the cell proliferation, the greater the expression and activity of TS. These findings could explain why TS values are of prognostic value per se and why tumours with high TS expression benefit more from chemotherapy.

Biomarkers, Tumor↗