PubMed Health⌕ Search

Biomedical subjects

L Salamanca-Riba

Publications and source records attributed to L Salamanca-Riba.

9 recordsLinked to original sources

On the origin of high-temperature ferromagnetism in the low-temperature-processed Mn-Zn-O system.

The recent discovery of ferromagnetism above room temperature in low-temperature-processed MnO(2)-ZnO has generated significant interest. Using suitably designed bulk and thin-film studies, we demonstrate that the ferromagnetism in this system originates in a metastable phase rather than by carrier-induced interaction between separated Mn atoms in ZnO. The ferromagnetism persists up to approximately 980 K, and further heating transforms the metastable phase and kills the ferromagnetism. By studying the interface diffusion and reaction between thin-film bilayers of Mn and Zn oxides, we show that a uniform solution of Mn in ZnO does not form under low-temperature processing. Instead, a metastable ferromagnetic phase develops by Zn diffusion into the Mn oxide. Direct low-temperature film growth of Zn-incorporated Mn oxide by pulsed laser deposition shows ferromagnetism at low Zn concentration for an optimum oxygen growth pressure. Our results strongly suggest that the observed ferromagnetic phase is oxygen-vacancy-stabilized Mn(2-x)Zn(x)O(3-delta.).

Magnetics↗

Self-assembled single-crystal ferromagnetic iron nanowires formed by decomposition.

Arrays of perpendicular ferromagnetic nanowires have recently attracted considerable interest for their potential use in many areas of advanced nanotechnology. We report a simple approach to create self-assembled nanowires of alpha-Fe through the decomposition of a suitably chosen perovskite. We illustrate the principle behind this approach using the reaction 2La(0.5)Sr(0.5)FeO(3) --> LaSrFeO(4) + Fe + O(2) that occurs during the deposition of La(0.5)Sr(0.5)FeO(3) under reducing conditions. This leads to the spontaneous formation of an array of single-crystalline alpha-Fe nanowires embedded in LaSrFeO(4) matrix, which grow perpendicular to the substrate and span the entire film thickness. The diameter and spacing of the nanowires are controlled directly by deposition temperature. The nanowires show uniaxial anisotropy normal to the film plane and magnetization close to that of bulk alpha-Fe. The high magnetization and sizable coercivity of the nanowires make them desirable for high-density data storage and other magnetic-device applications.

Crystallization↗

Multiferroic BaTiO3-CoFe2O4 Nanostructures.

We report on the coupling between ferroelectric and magnetic order parameters in a nanostructured BaTiO3-CoFe2O4 ferroelectromagnet. This facilitates the interconversion of energies stored in electric and magnetic fields and plays an important role in many devices, including transducers, field sensors, etc. Such nanostructures were deposited on single-crystal SrTiO3 (001) substrates by pulsed laser deposition from a single Ba-Ti-Co-Fe-oxide target. The films are epitaxial in-plane as well as out-of-plane with self-assembled hexagonal arrays of CoFe2O4 nanopillars embedded in a BaTiO3 matrix. The CoFe2O4 nanopillars have uniform size and average spacing of 20 to 30 nanometers. Temperature-dependent magnetic measurements illustrate the coupling between the two order parameters, which is manifested as a change in magnetization at the ferroelectric Curie temperature. Thermodynamic analyses show that the magnetoelectric coupling in such a nanostructure can be understood on the basis of the strong elastic interactions between the two phases.

Journal Article↗

Topochemical anion metathesis routes to the Zr2N2S phases and the Na2S and ACl derivatives (A = Na, K, Rb).

Anion metathesis reactions between ZrNCl and A(2)S (A = Na, K, Rb) in the solid state follow three different pathways depending on reaction temperature and reactant stoichiometry: (1) the reaction of ZrNCl with A(2)S in the 2:1 stoichiometry at 800 degrees C/72 h/in vacuo yields alpha-Zr(2)N(2)S with the expected layered structure of La(2)O(2)S. Above 850 degrees C, alpha-Zr(2)N(2)S (P3 macro m1; a = 3.605(1) A, c = 6.421(3) A) neatly transforms to beta-Zr(2)N(2)S (P6(3)/mmc: a = 3.602(1) A, c = 12.817(1) A). The structures of the alpha- and beta-forms are related by an a/2 shift of successive Zr(2)N(2) layers. (2) The same reaction at low temperatures (300-400 degrees C) yields ACl intercalated phases of the formula A(x)Zr(2)N(2)SCl(x) (0 < x < approximately 0.15), where alkali ions are inserted between the S/Cl.S/Cl van der Waals gap of a ZrNCl-type structure. The S and Cl ions are disordered and the c lattice parameters are alkali dependent (R3 macro m, a approximately 3.6 A, c approximately 28.4 (Na), 28.9 (K), and 30.5 A (Rb). A(x)Zr(2)N(2)SCl(x) phases are hygroscopic and reversibly absorb water to give monohydrates. (3) Reaction of ZrNCl with excess A(2)S at 400-1000 degrees C gives A(2)S intercalated phases of the formula A(2)(x)Zr(2)N(2)S(1+)(x) (0 < x < 0.5), where the alkali ions reside between the S.S van der Waals gap of a ZrNCl type structure (R3 macro m, a approximately 3.64 A, c approximately 29.48 A). Structural characterization of the new phases and implications of the results are described.

Journal Article↗

The concept of high angle wedge polishing and thickness monitoring in TEM sample preparation.

The concept of high angle wedge polishing for TEM non-metal sample preparation is introduced for the first time. Also, introduced is the concept of converting lateral distance measurement into vertical thickness measurement in monitoring TEM sample thickness. Based on the Tripod polisher, Quadripod was constructed using these two concepts. Fast and reliable TEM sample preparation (mechanical polishing down to electron transparency) can be achieved using the Quadripod. In addition, Quadripod offers the ability of locating a specific area of interest.

Journal Article↗

Tuning of vertical and lateral correlations in self-organized PbSe/Pb1-xEuxTe quantum dot superlattices

The tuning of lateral and vertical correlations in self-organized PbSe/Pb 1-xEu xTe quantum dot superlattices by changes in the spacer thicknesses is demonstrated and shown to be due to finite size effects in the dot-dot interactions. As a consequence, different dot arrangements such as vertically aligned dot columns or fcc stacking are obtained for a single material system without changes in growth conditions. The different dot superstructures are shown to exhibit a different scaling behavior of the lateral versus vertical dot separation, as well as a different evolution of dot sizes and shapes.

Journal Article↗