PubMed Health⌕ Search

Biomedical subjects

L W Pol

Publications and source records attributed to L W Pol.

5 recordsLinked to original sources

New perspectives in anaerobic digestion.

The IWA specialised group on anaerobic digestion (AD) is one of the oldest working groups of the former IAWQ organisation. Despite the fact that anaerobic technology dates back more than 100 years, the technology is still under development, adapting novel treatment systems to the modern requirements. In fact, most advances were achieved during the last three decades, when high-rate reactor systems were developed and a profound insight was obtained in the microbiology of the anaerobic communities. This insight led to a better understanding of anaerobic treatment and, subsequently, to a broader application potential. The present "state-of-the-art" paper, which has been written by members of the AD management committee, reflects the latest achievements and sets future lines for further development.

Bacteria, Aerobic↗

Anaerobic treatment for C and S removal in "zero-discharge" paper mills: effects of process design on S removal efficiencies.

Stringent environmental laws in Europe and Northern America lead to the development towards closure of the process water streams in pulp and paper mills. Application of a "zero-discharge" process is already a feasible option for the board and packaging paper industry, provided in-line treatment is applied. Concomitant energy conservation inside the mill results in process water temperatures of 50-60 degrees C. Thermophilic anaerobic treatment complemented with appropriate post-treatment is considered as the most cost-effective solution to meet re-use criteria of the process water and to keep its temperature. In the proposed closed-cycle, the anaerobic treatment step removes the largest fraction of the biodegradable COD and eliminates "S" as H2S from the process stream, without the use of additional chemicals. The anaerobic step is regarded as the only possible location to bleed "S" from the process water cycle. In laboratory experiments, the effect of upward liquid velocity (Vupw) and the specific gas loading rate (Vgas) on the S removal capacity of thermophilic anaerobic bio-reactors was investigated. Acidifying, sulphate reducing sludge bed reactors were fed with partly acidified synthetic paper mill wastewater and were operated at 55 degrees C and pH 6. The reactors were operated at organic loading rates up to 50 g COD.l-1.day-1 at COD/SO4(2-) ratios of 10. The effect of Vupw was researched by comparing the performance of a UASB reactor operated at 1.0 m.h-1 and an EGSB reactor, operated at 6.8 m.h-1. The Vupw had a strong effect on the fermentation patterns. In the UASB reactor, acidification yielded H2, acetate and propionate, leading to an accumulation of reducing equivalents. These were partly disposed of by the production of n-butyrate and n-valerate from propionate. In the EGSB reactor net acetate consumption was observed as well as high volumetric gas (CO2 and CH4) production rates. The higher gas production rates in the EGSB reactor resulted in higher S-stripping efficiencies. The effect of Vgas was further researched by comparing 2 UASB reactors which were sparged with N2 gas at a specific gas loading rate of 30 m3.m-2.day-1. In contrast to the regular UASB reactors, the gas-supplied UASB showed a more stable performance when the organic loading rates were increased. Also, the H2S stripping efficiency was 3-4 times higher in the gas-supplied UASB, reaching values of 67%. Higher values were not obtained owing to the relatively poor sulphate reduction efficiencies.

Bacteria, Anaerobic↗

New developments in reactor and process technology for sulfate reduction.

Sulfate reduction has been regarded in the past as an unwanted process in anaerobic treatment of sulfate-rich wastewaters. Research efforts were primarily focused on H2S toxicity, competition between sulfidogenic and methanogenic microorganisms and suppression of sulfidogenesis. More recently, the potential sulfidogenesis for treating a wide range of wastestreams contaminated with oxidized sulfurous compounds and/or heavy metals was also appreciated. Heavy metals can be removed by the formation and subsequent precipitation of poorly soluble metal sulfides. Basically two approaches can be distinguished in wastewater treatment: passive treatment using low-cost technologies and active treatment in newly developed bioreactors. Both strategies are discussed.

Bioreactors↗

Anaerobic biodegradability of phthalic acid isomers and related compounds.

All three phthalic acid isomers (ortho, meta and para benzene dicarboxylic acid) are produced in massive amounts, and used in the chemical industry as plasticizers or for the production of polyester. Wastestreams generated during the production of phthalate isomers generally contain high concentrations of aromatic acids. To study the potential biodegradability of these primarily anthropogenic compounds in anaerobic bioreactors, biodegradability studies were performed. Compounds tested were benzoate, ortho-phthalate, isophthalate, terephthalate, dimethyl phthalate, dimethyl terephthalate, para-toluate and para-xylene. Seed materials tested were two types of granular sludge and digested sewage sludge. It was found that all phthalate isomers and their corresponding dimethyl-esters, could be completely mineralized by all seed materials studied. Lag phases required for 50% degradation of these compounds, ranged from 17 to 156 days. The observed degradation curves could be explained by growth of an initially small amount of organisms in the inoculum with the specific ability to degrade one phthalate isomer. The observed order in the length of the lag phases for the phthalate isomers is: phthalate < terephthalate < isophthalate. This order appears to be related to the environmental abundancy of the different phthalate isomers. The initial step in the degradation pathway of both dimethyl phthalate esters was hydrolysis of the ester sidechain, resulting in the formation of the corresponding mono-methyl-phthalate isomer and phthalate isomer. The rate limiting step in mineralization of both dimethyl phthalate and dimethyl terephthalate was found to be fermentation of the phthalate isomer. Para-toluate was degraded only by digested sewage sludge after a lag phase of 425 days. The observed degradation rates of this compound were very low. No mineralization of para-xylene was observed. In general, the differences in the lag phases between different seed materials were relatively small. These results indicate that the time needed for the start-up of anaerobic bioreactors treating wastewaters containing phthalic acid isomers, depends little on the microbial composition of the seed material applied, but may take several months.

Anaerobiosis↗

Methanogenesis in an Upflow Anaerobic Sludge Blanket Reactor at pH 6 on an Acetate-Propionate Mixture.

High-rate anaerobic digestion can be applied in upflow anaerobic sludge blanket reactors for the treatment of various wastewaters. In upflow anaerobic sludge blanket reactors, sludge retention time is increased by a natural immobilization mechanism (viz. the formation of a granular type of sludge). When this sludge is cultivated on acid-containing wastewater, the granules mainly consist of an acetoclastic methanogen resembling Methanothrix soehngenii. This organism grows either in rods or in long filaments. Attempts to cultivate a stable sludge consisting predominantly of Methanosarcina sp. on an acetate-propionate mixture as substrate by lowering the pH from 7.5 during the start-up to approximately 6 failed. After 140 days of continuous operation of the reactor a filamentous organism resembling Methanothrix soehngenii prevailed in the sludge. The specific methanogenic activity of this sludge on acetate-propionate was optimal at pH 6.6 to 6.8 and 7.0 to 7.2, respectively.

Journal Article↗