Biomedical subjects

Lai Wah Chan

Publications and source records attributed to Lai Wah Chan.

11 recordsLinked to original sources

PubMed2006

Novel polymeric microspheres containing norcantharidin for chemoembolization.

Chemoembolization has been found to be a potentially effective method of treating certain types of cancer. It involves arterial embolization of a tumor, in combination with simultaneous or subsequent local delivery of chemotherapeutic agents. In this study, PLGA-alginate microspheres were evaluated for their potential application in chemoembolization. Norcantharidin, which possesses anti-tumor properties, was used to investigate the application of drug-containing microspheres for chemoembolization. The release profiles of alginate, PLGA and PLGA-alginate microspheres were markedly different in phosphate buffered saline, with the composite microspheres showing the most appropriate release rate for chemoembolization. Burst effect decreased while particle size increased with increasing proportion of alginate in the PLGA-alginate microspheres. PLGA-alginate microspheres containing norcantharidin were effective in destroying the cancer cells used in this study. The growth inhibitory effect was concentration and time dependent. These microspheres also exhibited excellent embolization and therapeutic effects on rats with transplanted tumors.

Alginates↗

PubMed2005

Evaluation of sodium alginate as drug release modifier in matrix tablets.

Alginates are useful natural polymers suitable for use in the design of pharmaceutical dosage forms. However, the effects of particle size, viscosity and chemical composition of alginates on drug release from alginate matrix tablets are not clearly understood. Hence, 17 grades of sodium alginate with different particle size distributions, viscosities and chemical compositions were used to prepare matrix tablets at various concentrations to screen the factors influencing drug release from such matrices. Particle size was found to have an influence on drug release from these matrices. Sodium alginate was subsequently classified into several size fractions and also cryogenically milled to produce smaller particle size samples. Cryogenic milling could be successfully applied to pulverize coarse alginate particles without changing the quality through degradation or segregation. This study showed the significance of each alginate property in modulating drug release: particle size is important in initial alginic acid gel barrier formation as it affected the extent of burst release; higher alginate viscosity slowed down drug release rate in the buffer phase but enhanced release rate in the acid phase; high M-alginate might be more advantageous than high-G-alginate in sustaining drug release; and, the effect of increasing alginate concentration was greater with larger alginate particles. This can serve as a framework for formulators working with alginates. Furthermore, the results showed that sodium alginate matrices can sustain drug release for at least 8 h, even for a highly water-soluble drug in the presence of a water-soluble excipient.

Alginates↗

PubMed2005

Aging and microwave effects on alginate/chitosan matrices.

The influence of microwave irradiation on the drug release properties of freshly prepared and aged alginate, alginate-chitosan and chitosan beads was investigated. The beads were prepared by extrusion method with sulphathiazole as a model drug. The dried beads were subjected to microwave irradiation at 80 W for 10 min, 20 min or three consecutive cycles of 10 and 20 min, respectively. The profiles of drug dissolution, drug content, drug stability, drug polymorphism, drug-polymer interaction, polymer crosslinkage and complexation were determined by dissolution testing, drug content assay, differential scanning calorimetry and Fourier transform infra-red spectroscopy. The chemical stability of drug embedded in beads was unaffected by microwave conditions and length of storage time. The release property of drug was mainly governed by the extent of polymer interaction in beads. The aged alginate beads required intermittent cycles of microwave irradiation to induce drug release retarding effect in contrast to their freshly prepared samples. Unlike the alginate beads, the level of polymer interaction was higher in aged alginate-chitosan beads than the corresponding fresh beads. The drug release retarding property of aged alginate-chitosan beads could be significantly enhanced through subjecting the beads to microwave irradiation for 10 min. No further change in drug release from these beads was observed beyond 30 min of microwave irradiation. Unlike beads containing alginate, the rate and extent of drug released from the aged chitosan beads were higher upon treatment by microwave in spite of the higher degree of polymer interaction shown by the latter on prolonged storage. The observation suggested that the response of polymer matrix to microwave irradiation in induction of drug release retarding property was largely affected by the molecular arrangement of the polymer chains.

Alginates↗

PubMed2005

Novel film modifiers to alter the physical properties of composite ethylcellulose films.

PURPOSE: Polyvinylpyrrolidone (PVP), molecular-composite PVP, and Plasdone S-630 copolyvidonum are potential polymeric film modifiers for achieving improved drug release. The aim of this study was to investigate how these polymeric additives would affect the physicomechanical properties of composite ethylcellulose films. METHODS: The miscibility of these polymeric additives with ethylcellulose was determined from the differential scanning calorimetry (DSC) thermograms of various polymer blends formed from organic solvents. It was found that ethylcellulose (EC) was miscible with the polymeric additives up to a concentration of 50%. Ten percent to 30% w/w polymeric additives were then added to aqueous ethylcellulose dispersion to form composite films. The morphology, film transparency, dynamic mechanical analysis (DMA) thermograms, and mechanical properties of the composite ethylcellulose films were studied. In addition, puncture strength and % elongation of the dry and wet films were also compared from indentation test. RESULTS: Significant reduction and change in film transparency and morphology was obtained for EC films blended with PVP of higher molecular weight (MW). The composite EC films also showed higher Tg, greater elastic modulus, tensile and puncture strength depending on the concentration and type of additives present. CONCLUSIONS: The interaction between ethylcellulose and the polymeric additives is dependent on the MW and concentration of additives. The composite films offer new opportunities for the use of ethyl-cellulose as modified release coatings for dosage forms.

Cellulose↗

PubMed2005

Liquid phase coating to produce controlled-release alginate microspheres.

This study explored a liquid phase coating technique to produce polymethyl methacrylate (PMMA)-coated alginate microspheres. Alginate microspheres with a mean diameter of 85.6 microm were prepared using an emulsification method. The alginate microspheres, as cores, were then coated with different types of PMMA by a liquid phase coating technique. The release characteristics of these coated microspheres in simulated gastric (SGF) and intestinal (SIF) fluids and the influence of drug load on encapsulation efficiency were studied. The release of paracetamol, as a model hydrophilic drug, from the coated microspheres in SGF and SIF was greatly retarded. Release rates of Eudragit RS100-coated microspheres in SGF and SIF were similar as the rate-controlling polymer coat was insoluble in both media. Drug release from Eudragit S100-coated microspheres was more sustained in SGF than in SIF, due to the greater solubility of the coating polymer in media with pH greater than 7.0. The drug release rate was affected by the core:coat ratio. Drug release from the coated microspheres was best described by the Higuchi's square root model. The liquid phase coating technique developed offers an efficient method of coating small microspheres with markedly reduced drug loss and possible controlled drug release.

Acetaminophen↗

PubMed2004

Influences of osmotic agents in diffusion layer on drug release from multilayer coated pellets.

Nonpareil beads were coated with three different functional layers, namely inner chlorpheniramine maleate-loaded hydroxypropylmethylcellulose (HPMC, 4 mPa x s) deposition layer, middle HPMC (400 mPa x s) diffusion layer, and outer polyacrylic polymer (Eudragit RS30D) retention layer. The osmotic agents, including sodium chloride, glycine, citric acid, and disodium hydrogen phosphate, were incorporated in different amounts into the diffusion layer and the influences on drug release were studied. The osmotic agent competed with HPMC for imbibed water and subsequently caused more water influx owing to the osmotic pressure gradient. An appropriate amount of osmotic agent in the diffusion layer was necessary to exert its effect on retarding drug release. The osmotic effect on drug release was compromised with pellets at a higher coating level of the diffusion layer due to the extensive swelling and rupture of coat. The release parameters, including dissolution T50% and mean dissolution time, showed linear relationship with osmolalities of osmotic agents studied. The effect of the osmotic agent in the diffusion layer played an important role in determining the unique multiphase drug release profiles, particularly in the initial phase of dissolution, and reduced with depletion of the osmotic agent in the later phase of dissolution.

Acrylic Resins↗

PubMed2004

Complexation between PVP and Gantrez polymer and its effect on release and bioadhesive properties of the composite PVP/Gantrez films.

Complexation between poly(methyl vinyl ether-maleic anhydride) copolymer (Gantrez AN 169) and polyvinylpyrrolidone (PVP K-90D) in aqueous solutions were investigated using a viscometric method and Raman spectroscopy. The composite films with different weight ratios of PVP to Gantrez were prepared in the presence of N-methyl-2-pyrrolidone. The release profiles of diclofenac sodium (DS) from these films were determined and the bioadhesive properties measured. An interpolymer complex was formed through hydrogen bonding between the carbonyl groups of PVP and the hydroxyl groups of Gantrez. The formation of interpolymer hydrogen bonds reduced the interaction of the polymers with water molecules, thus resulting in a lower solubility of the complex in water and a further retarded release of DS from the composite films. The interpolymer complexation was also found to increase the bioadhesive properties of the composite films to a silicone elastomer substrate. The complexation of PVP and the Gantrez copolymer in the composite films was a critical factor affecting the release of DS from the films and the bioadhesive properties of the films.

Adhesives↗

PubMed2003

Immobilization of fine particles on lactose carrier by precision coating and its effect on the performance of dry powder formulations.

The feasibility of immobilization of fine particles on a lactose carrier by precision coating and producing carrier particles of different surface roughness from the same core was explored. A relationship between the resultant surface roughness of the carrier and the in vitro deposition pattern of salbutamol sulfate was established. Lactose carrier particles in the precision coating chamber were spray coated with liquid suspensions consisting of micronized lactose dispersed in isopropyl alcohol (IPA) and/or water mixtures. The surface-modified lactose particles were fractionated and then characterized by laser diffraction for size, image analysis for shape, and scanning probe microscopy for surface roughness. The in vitro deposition pattern of salbutamol sulfate from the drug-lactose mixtures was determined with the twin-stage glass impinger and expressed as the fine particle fraction and dispersibility of the drug. Immobilization of fine particles on carrier particles was feasible by the precision coating process as shown by the scanning probe topographs and the roughness values of the carrier particles. Generally, more discrete fine particles were deposited on the carrier surface and a higher surface roughness was seen when the spray suspension consisting of a higher proportion of IPA was used. A significant correlation was found between the fine particle fraction of salbutamol sulfate with the roughness of lactose. This relationship established between the in vitro drug deposition pattern and the microscopic surface roughness of the carrier would be helpful in the optimization of drug delivery to targeted areas in the lungs.

Albuterol↗

PubMed2003

Anti-tack action of polyvinylpyrrolidone on hydroxypropylmethylcellulose solution.

The anti-tack action of polyvinylpyrrolidone (PVP) on hydroxypropylmethylcellulose (HPMC) solution was elucidated using a probe test method. The influence of PVP of varying molecular weights at various PVP concentrations and solution temperatures on the tackiness of HPMC solution was studied. The viscosity, surface tension, cloud point and solution spectroscopy of HPMC solutions and glass transition temperature of HPMC films, with and without PVP, were investigated. The tackiness of HPMC solutions in response to the addition of PVP, at different concentrations of HPMC and using HPMC with varying contents of hydroxypropyl/methoxyl substitution, was also evaluated. PVP is a commonly used binder and adhesive. However, it reduced the tack of the HPMC solution when used at low concentrations, without affecting the state of hydration of HPMC. Lower molecular weight PVP was more effective as an anti-tack agent owing to suitable hydrodynamic size to intersperse among the HPMC chains. The degree of reduction in tack values was more pronounced for HPMC that showed a greater extent of interaction between polymer chains such as when high concentration of HPMC or low solution temperature was employed. This indicated that the tack reduction property of PVP relied on its ability to interact with the HPMC chains. The profile of reduction in tack values was affected by the contents of HPMC substitution and was a result of net reduction in the extent of hydrogen bonding between HPMC chains. It was significantly correlated to the changes of viscosity and surface tension of the HPMC solutions but not to the glass transition temperatures of the polymers prepared as solid films. The results suggested that the anti-tack action of PVP was attributed to its ability to interact with HPMC chains in the aqueous medium and consequently to reduce the extent of HPMC-HPMC bonding.

Hypromellose Derivatives↗

PubMed2002

Design of controlled-release solid dosage forms of alginate and chitosan using microwave.

The influence of microwave irradiation on the drug release properties of alginate, alginate-chitosan and chitosan beads was investigated. The beads were prepared with the highest possible concentration of polymer by an extrusion method. Sulphathiazole was selected as a model drug. The beads were subjected to microwave irradiation at various combinations of irradiation power and time. The profiles of drug dissolution, drug content, drug stability, drug polymorphism, drug-polymer interaction, polymer crosslinkage and complexation were determined by dissolution testing, drug content assay, differential scanning calorimetry (DSC) and fourier transform infra-red spectroscopy (FTIR). The chemical stability of the drug entrapped in the beads was unaffected by the microwave irradiation. However, the drug in the chitosan beads underwent polymorphic changes. Polymorphic changes were prevented by means of drug-alginate interaction in alginate and alginate-chitosan beads. Changes in the polymorphic state of drug were found to have insignificant effect on the drug release profiles of chitosan beads. The release-retarding property of alginate and alginate-chitosan beads was significantly enhanced by subjecting the beads to microwave irradiation. Positively charged calcium ions and chitosan are known to interact with negatively charged alginate. DSC and FTIR analyses indicated that the reduction in rate and extent of drug released from the treated beads was primarily due to additional formation of non-ionic bonds, involving alginate crosslinkage and alginate-chitosan complexation. The results showed that microwave technology can be employed in the design of solid dosage forms for controlled-release application without the use of noxious chemical agents.

Alginates↗

PubMed2002

Effects of aldehydes and methods of cross-linking on properties of calcium alginate microspheres prepared by emulsification.

Calcium alginate microspheres were prepared by an emulsification method and cross-linked with various aldehydes using different methods. Methanal and pentanedial produced low aggregation of microspheres while octanal and octadecanal produced the opposite effect. The latter two aldehydes displaced very little calcium ions from the alginate microspheres, indicating that the aggregation was due to the tackiness imparted by the aldehydes to the microsphere surface. Higuchi's model was not applicable to the drug release from microspheres in this study. The microspheres treated with methanal or pentanedial showed comparable dissolution T75% values which were significantly higher than that of the control. In contrast, octanal and octadecanal produced microspheres with lower dissolution T75% values. The drug contents of the microspheres treated with aldehydes were significantly lower than that of the control. There was insignificant interaction between the aldehydes and the drug. However, the aldehydes were found to impart acidity to the aqueous solution to varying extents, resulting in varying drug loss from the microspheres. The properties of the microspheres were also markedly affected by the method of incorporating the aldehyde. Soaking the microspheres in methanal solution produced microspheres with marked aggregation and low drug content.

Aldehydes↗