Biomedical subjects

Larry P Walker

Publications and source records attributed to Larry P Walker.

11 recordsLinked to original sources

PubMed2005

Molecular characterization of fungal community dynamics in the initial stages of composting.

Composting relies on a complex network of bacteria and fungi to process crude organic material. Although it is known that these organisms drive dynamic changes in temperature and pH, little is known about the temporal dynamics of fungal populations during the rise to thermophilic conditions. This study employed F-ARISA (fungal-automated rRNA intergenic spacer analysis) and 18S rRNA gene cloning and sequencing to examine changes in community structure during this period. Sequencing of the 18S rRNA portion of cloned F-ARISA products revealed the presence of four distinct fungal genera including Backusella sp., Mucoraceae, Geotrichum sp. and the yeast Pichia sp. Based on the presence and absence of these ARISA operational taxonomic units (A-OTUs), we observed a shift in fungal community structure between 48 and 60 h. This change in community structure preceded a rise in pH and coincided with an increase in temperature. Clone libraries constructed using fungi-specific 18S rRNA primers contained sequences similar to several other fungal genera including Penicillium sp., Aspergillus sp., Hamigera sp., Neurospora sp. and the yeast Candida sp. While the fungal species richness was relatively low at any time point, the community structure was dynamic and paralleled changes in bacterial community structure.

Fungi↗

PubMed2004

Quantifying bacterial population dynamics in compost using 16S rRNA gene probes.

Composting provides a dynamic setting for studying ecological topics such as succession, competition, and community stability in a relatively short period of time. This study used hierarchical small sub-unit-based rRNA gene probes to quantify the change in the relative abundance of phylogenetic groups common to compost in laboratory scale reactors. Bacterial 16S rRNA gene targets accounted for only 37% of all small subunit (SSU) rRNA genes initially, but increased to a maximum of 83% of the total at 84 h. The sum of rRNA genes detected using probes specific to Pseudomonas and low-G+C Gram-positive rRNA genes represented between 16% and 87% of the total. The lack of hybridization to the taxon-specific probes was most pronounced between 36 h and 60 h, when the pH was between 4.6 and 4.8. During this period the relative abundance of taxon-specific gene targets accounted for only 17-33% of the total bacterial rRNA gene targets. Pseudomonas-type 16S rRNA genes were the most abundant of the groups measured until 72 h. Those genes had their highest relative abundance at 12 h (78% of bacterial rRNA genes; 30% of all rRNA genes), after which time their relative abundance began to decline as the temperature increased. Prior to 72 h, 16S rRNA genes from low-G+C Gram-positive bacteria (LGC-GPB) represented less than 7% of the bacterial rRNA genes. However, by 84 h the relative abundance of LGC-GPB and Bacillus rRNA genes had increased to 60% and 18% of the bacterial rRNA gene targets, respectively (50% and 15% of all rRNA genes, respectively).

Base Composition↗

PubMed2003

Binding and reversibility of Thermobifida fusca Cel5A, Cel6B, and Cel48A and their respective catalytic domains to bacterial microcrystalline cellulose.

The binding and reversibility of Thermobifida fusca intact Cel5A, Cel5B, and Cel48A and their corresponding catalytic domains (CDs) to bacterial microcrystalline cellulose (BMCC) were studied at 5 degrees C. The binding of the intact cellulases and of corresponding CDs to BMCC was irreversible in all regions: Langmuir binding (region I), interstice penetration (region II), and interstice saturation (region III). The three cellulose binding domains (CBMs) bind reversibly in "region I" although their respective CDs do not. The irreversible binding of these enzymes in the Langmuir region does not satisfy the Langmuir assumption; however, the overall fit of the Interstice Saturation model, which includes binding in MBCC interstices as well as on the freely accessible surface (Jung et al., 2002a) is good. The main limitation of the model is that it does not explicitly address a mechanism for forming the enzyme-substrate complex within the active site of the CDs.

Actinomycetales↗

PubMed2003

A quantitative analysis of DNA extraction and purification from compost.

We quantified both DNA and humic acid concentrations during the extraction and purification of DNA from compost. The DNA extraction method consisted of bead-beating with SDS for cell lysis, poly(ethylene glycol)-8000 precipitation for preliminary DNA purification, and chromatography on a 10-ml Sephadex G-200 column for final DNA purification. Direct microscopic observation of pre- and post-lysis samples revealed that 95.3+/-2.3% of native cells was lysed. Sixty-three percent of the original DNA was lost during purification, resulting in a final DNA yield of 18.2+/-3.8 microg DNA/g of wet compost. The humic acid content was reduced by 97% during the purification steps resulting in a final humic acid concentration of 27+/-4.7 ng humic acid/microl. The purified DNA fragments were up to 14 kbp in size and were sufficiently free of contaminants to allow both restriction enzyme digestion by four different enzymes and PCR amplification of 16S rDNA.

Bacteria↗

PubMed2002

Binding mechanisms for Thermobifida fusca Cel5A, Cel6B, and Cel48A cellulose-binding modules on bacterial microcrystalline cellulose.

The family II cellulose-binding modules (CBM) from Thermobifida fusca Cel5A and Cel48A were cloned in the Escherichia coli/Streptomyces shuttle vector pD730, and the plasmids were transformed into Streptomyces lividans TKM31. CBM(Cel5A), and CBM(Cel48A), CBM(Cel6B) were expressed and purified from S. lividans. The molecular masses were determined by mass spectrometry, and the values were 10595 +/- 2, 10915 +/- 2, and 11291 +/- 2 Da for CBM(Cel5A), CBM(Cel6B), and CBM(Cel48A), respectively. Three different binding models (Langmuir, Interstice Penetration, and Interstice Saturation) were tested to describe the binding isotherms of these CBMs on bacterial microcrystalline cellulose (BMCC). The experimental binding isotherms of T. fusca family II CBMs on BMCC are best modeled by the Interstice Saturation model, which includes binding to the constrained interstice surface of BMCC as well as traditional Langmuir binding on the freely accessible surface. The Interstice Saturation model consists of three different steps (Langmuir binding, interstice binding, and interstice saturation). Full reversibility only occurred in the Langmuir region. The irreversibility in the interstice binding and saturation regions probably was caused by interstice entrapment. Temperature shift experiments in different binding regions support the interstice entrapment assumption. There was no systematic difference in binding between the two types of exocellulase CBMs--one that hydrolyzes cellulose from the nonreducing (CBM(Cel6B)) end and one that hydrolyzes cellulose from the reducing end (CBM(Cel48A)).

Actinomycetales↗

PubMed2002

Nonylphenol in anaerobically digested sewage sludge from New York State.

Nonylphenols (NPs) have been identified as xenoestrogens and have been found at high concentrations in Canadian and European biosolids. While nonylphenol polyethoxylates (NPEOs) are being phased out and regulated in several European countries, there is currently no regulation of these compounds in the United States, and little information is available concerning the presence of NPs in U.S. biosolids. Anaerobically digested sewage sludge from five wastewater treatment plants in central New York State was analyzed for the presence of NPs. Samples were taken from treatment plants in both small municipalities and larger metropolitan areas with a range of industrial inputs. Samples were extracted via Soxhlet apparatus and analyzed by GC/MS. The various isomers of NP were summed yielding total NP concentrations as high as 1840 mg/kg with a mean of 1500 mg/kg on a dry weight basis. These values are two to five times as high as previously reported concentrations for U.S. and Canadian biosolids from plants using similar treatment schemes.

Anaerobiosis↗

PubMed2002

Synergism in binary mixtures of Thermobifida fusca cellulases Cel6B, Cel9A, and Cel5A on BMCC and Avicel.

In an earlier binding study conducted in our laboratory using Thermobifida fusca cellulases Cel6B, Cel9A, and Cel5A (formally Thermomonosporafusca E3, E4, and E5), it was observed that binding capacities for these three cellulases were 18-30 times higher on BMCC than on Avicel. These results stimulated an interest in how the difference in accessibility between the two cellulosic substrates would affect synergism observed with cellulase mixtures. To explore the impact of substrate accessibility on the extent of conversion and synergism, three binary T. fusca cellulase mixtures were tested over a range of cellulase ratios and total molar cellulase concentrations on Avicel and BMCC. Higher extents of conversion were observed for BMCC due to the higher enzyme to substrate ratio resulting from the higher binding. The processive endoglucanase, Cel9A, had four times the extent of conversion of the endocellulase Cel5A, while the exocellulase Cel6B had three times the extent of conversion of Cel5A. Approximately 500 nmol/g of the Cel9A+Cel6B mixture was needed to obtain 80% conversion, while the Cel6B+Cel5A and Cel9A+Cel5A mixtures required 1500 and 1250 nmol/g, respectively, to obtain 80% conversion. Thus, it appears that the more accessible structure of BMCC, as reflected by its binding capacity, results in relative higher processive activity.

Actinomycetales↗

PubMedDate not supplied

Cooperative and competitive binding in synergistic mixtures of Thermobifida fusca cellulases Cel5A, Cel6B, and Cel9A.

Synergism between cellulases facilitates efficient hydrolysis of microcrystalline cellulose. We hypothesize that the effects of synergism, observed as enhanced extents of hydrolysis, are related to cellulase binding to the substrate in mixtures. In this study, direct measurements of bound concentrations of fluorescence-labeled T. fusca Cel5A, Cel6B, and Cel9A on bacterial microcrystalline cellulose were used to study binding behaviors of cellulases in binary component reactions. The accuracy of the determination of fluorescence-labeled cellulase concentrations in binary component mixtures was in the range of 7-9%. Data at 5 degrees C show that binding levels of cellulases in mixture reactions are only 22-70% of the binding levels in single component reactions. At 50 degrees C, however, most of the cellulase components in the same mixtures bound to extents of 40-126% higher than in the corresponding single component reactions. The degrees of synergistic effect (DSE) observed for the reactions at 50 degrees C were greater than 1, indicating that the components in the mixture acted synergistically, whereas DSE < 1 was generally observed for the reactions at 5 degrees C indicating anti-synergistic behavior. Degrees of synergistic binding (DSB) were also calculated, where anti-synergistic mixtures had DSB < 1 and synergistic mixtures had DSB>1. We conclude that the lower extents of binding at 5 degrees C are due to competition for binding sites by the cellulase components in the mixtures and the enhanced binding extents at 50 degrees C are due to increased availability of binding sites on the substrates brought about by the higher extents of hydrolysis.

Actinomycetales↗

PubMedDate not supplied

Effects of oxygen on aerobic solid-state biodegradation kinetics.

Oxygen is a critical control variable for composting and other solid-state biodegradation processes. In this study we examined the effect of varying oxygen concentrations (1%, 4%, and 21% O2 (v/v)) on biodegradation kinetics under different substrate (sewage sludge and synthetic food waste), temperature (35, 45, 55, and 65 degrees C), and moisture (36-60% H2O) conditions. Three forms of a saturation or Monod-type model and one form of an exponential model were evaluated against data from extensive experiments under carefully controlled environmental conditions. The exponential model performed well at temperatures from 35 to 55 degrees C but had problems at higher temperatures. The Monod-type models yielded the best fit based on R2 values. Multiple linear regression was used to express the oxygen half-saturation coefficient as a function of temperature and moisture. For a modified one-parameter saturation model the half-saturation coefficient varied from -0.67% to 1.74% v/v O2 under the range of conditions typical of composting systems. While the positive correlation of biodegradation rate with oxygen concentration reported by previous researchers held true for temperatures below 55 degrees C, an inverse relationship was found at 65 degrees C. Although this study did not directly examine anaerobic conditions, the results under microaerophilic conditions suggest oxygen may not offer kinetic advantages for extreme thermophilic biodegradation processes.

Biodegradation, Environmental↗

PubMedDate not supplied

Modeling the temperature kinetics of aerobic solid-state biodegradation.

This study evaluated three models of microbial temperature kinetics using CO2 respiration data from aerobic solid-state biodegradation experiments. The models included those of Andrews and Kambhu/Haug, Ratkowsky et al., and the Cardinal Temperature Model with Inflection (CTMI) of Rosso et al. A parameter estimation routine implemented the Complex-Box search method for each model on 48 data sets collected during the composting of synthetic food waste or sewage-sludge (biosolids) mixed with maple wood chips at different oxygen concentrations and extents of decomposition. Each of the three nonlinear temperature kinetic functions proved capable of modeling a wide range of experimental data sets. However, the models differed widely in the consistency of their parameters. Parameters in the CTMI model were more stable over the course of the degradation process, and that variability which did arise was directly related to changes in the microbial process. Additional benefits of the CTMI model include the ease of parameter determinations, which can be approximated directly from laboratory experiments or full-scale system analysis, and the direct value of its parameters in engineering design and process control under a wide range of biodegradation conditions.

Bacteria, Aerobic↗

PubMedDate not supplied

Effect of cellulase mole fraction and cellulose recalcitrance on synergism in cellulose hydrolysis and binding.

Elucidating the molecular mechanisms that govern synergism is important for the rational engineering of cellulase mixtures. Our goal was to observe how varying the loading molar ratio of cellulases in a binary mixture and the recalcitrance of the cellulose to enzymatic degradation influenced the degree of synergistic effect (DSE) and degree of synergistic binding (DSB). The effect of cellulose recalcitrance was studied using a bacterial microcrystalline cellulose (BMCC), which was exhaustively hydrolyzed by a catalytic domain of Cel5A, an endocellulase. The remaining prehydrolyzed BMCC (PHBMCC) was used to represent a recalcitrant form of cellulose. DSE was observed to be sensitive to loading molar ratio. However, on the more recalcitrant cellulose, synergism decreased. Furthermore, the results from this study reveal that when an exocellulase (Cel6B) is mixed with either an endocellulase (Cel5A) or a processive endocellulase (Cel9A) and reacted with BMCC, synergism is observed in both hydrolysis and binding. This study also revealed that when a "classical" endocellulase (Cel5A) and a processive endocellulase (Cel9A) are mixed and reacted with BMCC, only limited synergism is observed in reducing sugar production; however, binding is clearly increased by the presence of the Cel5A.

Bacteria↗