Biomedical subjects

Laurence Meagher

Publications and source records attributed to Laurence Meagher.

5 recordsLinked to original sources

PubMed2005

Relationship between interfacial forces measured by colloid-probe atomic force microscopy and protein resistance of poly(ethylene glycol)-grafted poly(L-lysine) adlayers on niobia surfaces.

Adsorbed layers of "comb-type" copolymers consisting of PEG chains grafted onto a poly(l-lysine) (PLL) backbone on niobium oxide substrates were studied by colloid-probe AFM in order to characterize the interfacial forces associated with coatings of varying architectures (PEG/PLL ratios and PEG chain lengths) and their relevance to protein resistance. The steric and electrostatic forces measured varied substantially with the architecture of the PLL-g-PEG copolymers. Varying the ionic strength of the buffer solutions enabled discrimination between electrostatic and steric-entropic contributions to the net interfacial force. For high PEG grafting densities the steric component was most prominent, but at low ionic strengths and high grafting densities, a repulsive electrostatic surface force was also observed; its origin was assigned to the niobia charges beneath the copolymer, as insufficient protonated amine groups in the PLL backbone were available for compensation of the oxide surface charges. For lower grafting densities and lower ionic strengths there was a substantial attractive electrostatic contribution arising from interaction of the electrical double layer arising from the protonated amine groups, with that of the silica probe surface (as under low ionic strength conditions, the electrical double layer was thicker than the PEG layer). For these PLL-g-PEG coatings the net interfacial force can thus be a markedly varying superposition of electrostatic and steric-entropic contributions, depending on various factors. The force curves correlate with protein adsorption data, demonstrating the utility of AFM colloid-probe force measurements for quantitative analysis of surface forces and how they determine interfacial interactions with proteins. Such characterization of the net interfacial forces is essential to elucidate the multiple types of interfacial forces relevant to the interactions between PLL-g-PEG coatings and proteins and to advance interpretation of protein adsorption or repellence beyond the oversimplified steric barrier model; in particular, our data demonstrate the importance of an ionic-strength-dependent minimum PEG layer thickness to screen the electrostatic interactions of charged interfaces.

Adsorption↗

PubMed2005

Atomic force microscopy study of the interaction between adsorbed poly(ethylene oxide) layers: effects of surface modification and approach velocity.

The interaction forces between layers of the triblock copolymer Pluronic F108 adsorbed onto hydrophobic radio frequency glow discharge (RFGD) thin film surfaces and hydrophilic silica, in polymer-free 0.15 M NaCl solution, have been measured using the atomic force microscope (AFM) colloid probe technique. Compression of Pluronic F108 layers adsorbed on the hydrophobic RFGD surfaces results in a purely repulsive force due to the steric overlap of the layers, the form of which suggests that the PEO chains adopt a brush conformation. Subsequent fitting of these data to the polymer brush models of Alexander-de Gennes and Milner, Witten, and Cates confirms that the adsorbed Pluronic F108 adsorbs onto hydrophobic surfaces as a polymer brush with a parabolic segment density profile. In comparison, the interaction between Pluronic F108 layers adsorbed on silica exhibits a long ranged shallow attractive force and a weaker steric repulsion. The attractive component is reasonably well described by van der Waals forces, but polymer bridging cannot be ruled out. The weaker steric component of the force suggests that the polymer is less densely packed on the surface and is less extended into solution, existing as polymeric isolated mushrooms. When the surfaces are driven together at high piezo ramp velocities, an additional repulsive force is measured, attributable to hydrodynamic drainage forces between the surfaces. In comparing theoretical predictions of the hydrodynamic force to the experimentally obtained data, agreement could only be obtained if the flow profile of the aqueous solution penetrated significantly into the polymer brush. This finding is in line with the theoretical predictions of Milner and provides further evidence that the segment density profile of the adsorbed polymer brush is parabolic. A velocity dependent additional stepped repulsive force, reminiscent of a solvation oscillatory force, is also observed when the adsorbed layers are compressed under high loads. This additional force is presumably a result of hindered drainage of water due to the presence of a high volume fraction of polymer chains between the surfaces.

Journal Article↗

PubMed2003

Immobilization and surface characterization of NeutrAvidin biotin-binding protein on different hydrogel interlayers.

For a number of potential applications, it is desirable to immobilize avidin class molecules onto solid supports and exploit their ability to bind biotinylated molecules with high affinity. NeutrAvidin molecules were surface immobilized in various ways. In this study, NeutrAvidin was covalently attached by carbodiimide chemistry onto carboxyl groups of polyacrylic acid and carboxymethyl-dextran hydrogel interlayers. A third strategy involved the affinity "docking" of NeutrAvidin onto a biotinylated poly(ethylene glycol) interlayer. These three interlayers were selected for their low nonspecific binding of proteins, which was expected to minimize surface binding of NeutrAvidin by nonspecific interfacial adsorption. X-ray photoelectron spectroscopy (XPS) analyses allowed detailed characterization of the multilayer fabrication steps. An ELISA assay was used to measure NeutrAvidin activity, which varied with the surface immobilization route. Atomic force microcopy (AFM) force measurements showed that the hydrogel interlayer contributed to a repulsive force and verified the specific interaction between biotinylated AFM tips and the NeutrAvidin surfaces. When a solution of free biotin was injected into the AFM liquid cell, the force curve changed substantially and became identical to that recorded between surfaces carrying no NeutrAvidin, indicating that the free solution biotin had displaced NeutrAvidin proteins off the PEG-biotin layer.

Avidin↗

PubMed2002

Immobilized liposome layers for drug delivery applications: inhibition of angiogenesis.

Liposomes were immobilized onto the surface of perfluorinated polymer tape samples and tissue culture polystyrene well-plates using a multilayer immobilization strategy. In the first step, a thin interfacial bonding layer with surface aldehyde groups was deposited from a glow discharge struck in acetaldehyde vapour. Polyethylenimine was then covalently bound onto the aldehyde groups by reductive amination, followed by covalent binding of NHS-PEG-biotin molecules onto the surface amine groups by carbodiimide chemistry. Next, NeutrAvidin protein molecules were bound onto the PEG-biotin layer. Finally, liposomes containing PEG-biotinylated lipids were docked onto the remaining binding sites of the surface-immobilized NeutrAvidin molecules. AFM was used to image surface-bound liposomes and revealed a density well below close packing. The release characteristics of the surface-bound liposomes were measured by the fluorescence intensity changes of carboxyfluorescein upon release. Liposomes filled with sodium orthovanadate were surface immobilized and used in two in vitro angiogenesis assays. Marked differences compared to various control samples were observed, demonstrating the utility of drug-filled, surface-bound liposomes for evoking localized, controlled biological host responses proximal to an implanted biomedical device.

Angiogenesis Inhibitors↗

PubMedDate not supplied

Characterization of surface-immobilized layers of intact liposomes.

Surface-immobilized liposome layers are of interest for various potential applications such as localized drug delivery, but their characterization is challenging. We have employed an AFM method and fluorescent dye release to analyze anchored liposomes. In addition, we studied whether the liposomes are surface-bound solely via specific interaction (NeutrAvidin/biotin) or whether physisorptive binding also plays a role. Liposomes containing PEG-biotin lipids were affinity bound to NeutrAvidin molecules which had been immobilized onto solid supports via three different hydrogel interlayers. After liposome docking, approaching the surface with a colloid probe mounted onto an AFM cantilever showed considerable compression behavior, consistent with expectation based on intact, deformable liposomes but not lipid bilayers, thus showing that disruption of liposomes did not occur upon immobilization onto these support surfaces. Plastic deformation suggestive of liposome disruption on compression was not observed. The kinetics of fluorescent dye release also demonstrated that intact liposomes had been successfully immobilized onto all three supports. Blocking surface-immobilized NeutrAvidin molecules with excess biotin in solution before exposure to liposomes showed that the docking of liposomes was dependent largely but not exclusively on biotin-NeutrAvidin affinity binding, with evidence for some nonspecific physisorption, as the extent of liposome binding onto blocked NeutrAvidin surfaces was appreciably lower than for unblocked surfaces but not zero. Finally, consecutive addition of further NeutrAvidin and liposome layers enabled fabrication of multilayers, and this was clearly seen in AFM compressibility and fluorescent dye release measurements.

Avidin↗