Biomedical subjects

Lennart Piculell

Publications and source records attributed to Lennart Piculell.

14 recordsLinked to original sources

PubMed2006

Complex polyion-surfactant ion salts in equilibrium with water: changing aggregate shape and size by adding oil.

The phase behavior of ternary mixtures containing an alkyltrimethylammonium polyacrylate complex salt, water, and a nonpolar "oil" (n-decanol, p-xylene or cyclohexane) is investigated. The complex salts were prepared with short or long polyacrylates (30 or 6000 repeating units) and with hexadecyltrimethylammonium or dodecyltrimethylammonium surfactant ions. Phase diagrams and structures were determined by visual inspection and small-angle X-ray scattering analyses. Systems containing decanol display a predominance of lamellar phases, while hexagonal phases prevail in systems containing p-xylene or cyclohexane. The difference is interpreted as a result of the different locations of the oils within the surfactant aggregates. Decanol is incorporated at the aggregate interface, leading to a decrease in its curvature, which favors the appearance of lamellar structures. p-Xylene and cyclohexane, on the other hand, are mostly incorporated in the interior of the cylindrical aggregate, as reflected by its swelling as the oil content increases. The comparison of these results with those reported for similar systems with monovalent (bromide) counterions indicates a much more limited swelling of the lamellar phases with polymeric counterions by water. This limited swelling behavior is predominantly ascribed to bridging due to the polyions.

Journal Article↗

PubMed2006

Phase behavior of polyion-surfactant ion complex salts: effects of surfactant chain length and polyion length.

The aqueous phase behavior of a series of complex salts, containing cationic surfactants with polymeric counterions, has been investigated by visual inspection and small-angle X-ray scattering (SAXS). The salts were alkyltrimethylammonium polyacrylates, CxTAPAy, based on all combinations of five surfactant chain lengths (C6, C8, C10, C12, and C16) and two lengths of the polyacrylate chain (30 and 6 000 repeating units). At low water contents, all complex salts except C6TAPA6000 formed hexagonal and/or cubic Pm3n phases, with the hexagonal phase being favored by lower water contents. The aggregate dimensions in the liquid crystalline phases changed with the surfactant chain length. The determined micellar aggregation numbers of the cubic phases indicated that the micelles were only slightly aspherical. At high water contents, the C6TAPAy salts were miscible with water, whereas the other complex salts featured wide miscibility gaps with a concentrated phase in equilibrium with a (sometimes very) dilute aqueous solution. Thus, the attraction between oppositely charged surfactant aggregates and polyions decreases with decreasing surfactant chain length, and with decreasing polyion length, resulting in an increased miscibility with water. The complex salt with the longest surfactant chains and polyions gave the widest miscibility gap, with a concentrated hexagonal phase in equilibrium with almost pure water. A decrease in the attraction led to cubic-micellar and micellar-micellar coexistence in the miscibility gap and to an increasing concentration of the complex salt in the dilute phase. For each polyion length, the mixtures for the various surfactant chain lengths were found to conform to a global phase diagram, where the surfactant chain length played the role of an interaction parameter.

Journal Article↗

PubMed2006

A model for the drug release from a polymer matrix tablet--effects of swelling and dissolution.

A model for simulating the drug release from a swelling and dissolving polymer tablet is presented and verified to data. The model is based on a mechanistic approach, and it can therefore be employed to study the sensitivity of true physical constants, for instance the drug diffusion coefficient or the drug solubility. The model generates the drug and polymer release profiles and the front positions of the total tablet, the solid core, and of the solid-drug-solubilized-drug interface. The convective contribution to mass transfer is shown to be of great importance. This is most markedly noticed for slowly diffusing drugs. In a simulation with a low value of the drug diffusion coefficient, it is shown that the initial drug release rate is faster than the polymer dissolution rate, followed by a second stage with a slower drug release rate. Furthermore, it is shown that polymer dissolution influences the drug release profile significantly, but not the front position of saturated drug in the gel layer. The model is verified against drug release and polymer dissolution data for the slightly soluble drug Methyl paraben and the soluble drug Saligenin in a poly (ethylene oxide) tablet, resulting in good agreement between model and experiments.

Benzyl Alcohols↗

PubMed2006

Gels of hydrophobically modified hydroxyethyl cellulose cross-linked by amylose. Competition with cyclodextrin.

Previous work has shown that amylose (AM) can cross-link hydrophobically modified polymers by inclusion complexation, whereby thermoreversible cold-setting gels are formed. In this work, the competition between AM and cyclodextrin (CD) for the formation of inclusion complexes with hydrophobically modified hydroxyethyl cellulose (HMHEC) is investigated. A detailed study of viscosity, NMR self-diffusion, and chemical shifts of the two-component mixture, CD and HMHEC, was performed. The results imply that 2:1 (CD:polymer hydrophobe) complexes may be formed. The three-component mixtures, HMHEC/AM/CD, were investigated by rheology, NMR self-diffusion, and intensities of the NMR resonance peaks. The CD molecules competed efficiently with the AM molecules, as seen by a decreased storage modulus, an increased self-diffusion of AM and HMHEC, and increased NMR intensities of the HMHEC hydrophobes, as the concentration of CD increased in the solution. A high concentration of CD is needed in the mixtures to inhibit all interactions between HMHEC and AM, and it was shown that there still is an effect of AM at excess CD concentration in the mixtures.

Amylose↗

PubMed2006

Presence or absence of counterion specificity in the interaction of alkylammonium surfactants with alkylacrylamide gels.

Patterns in the interaction of cationic surfactants with nonionic polymer gels, which were inferred from a recent study from our laboratory, are confirmed by measurements of a series of alkylammonium surfactants with different counterions with a series of alkyl acrylamide gels of increasing hydrophobicity. Two swelling patterns were observed: Either the swelling continued above the surfactant critical micelle concentration (cmc) and the maximum swelling differed for different counterions and increased in the order of Br-<Cl-<Ac-, in agreement with the degree of dissociation of these counterions and with the Hofmeister series or the swelling stopped below (or close to) the surfactant cmc, implying saturation binding, and the maximum swelling was similar for each of the three counterions. Binding studies confirmed that the amount of surfactant bound depends on the counterion in cases where saturation binding is not reached but not in cases where saturation binding is reached. The swelling/binding patterns could be rationalized in terms of a shift from partial binding to saturation binding with increasing gel hydrophobicity and an electrostatic intermicellar repulsion effectively independent of specific counterion binding, owing to "condensation" at the highly charged micellar surface.

Acrylamide↗

PubMed2005

Influence of added particles on the phase behavior of polymer solutions. Analysis by mean-field lattice theory.

The influence of added colloidal particles on the phase stability of polymer solutions is investigated theoretically. The polymer has an affinity to the particle surface. A mean-field lattice theory based on the Flory-Huggins theory is used to calculate the phase behavior in solutions containing a single polymer component and particles. The particles are described in two different ways. The first approach considers the surface free energy associated with added solid particles and the mixing entropy of the particles. In the second approach, the particles are simply modeled as large polymers. Both ways of describing the added particles show that the added particles decrease the stability of the polymer solution when the polymer-particle attraction is strong. A higher particle concentration enhances the effect. Experiments where polystyrene latex particles are added at different concentrations to aqueous dispersions of ethyl(hydroxyethyl)cellulose (EHEC) support the theoretical findings.

Journal Article↗

PubMed2005

Mixed solutions of an associating polymer with a cleavable surfactant.

Mixtures of hydrophobically modified hydroxyethyl cellulose (HMHEC) and alkali-sensitive cleavable betaine ester surfactants have been studied by viscometry, 1H NMR, absorbance measurements, and birefringence determinations. Before the hydrolysis, the surfactants behaved as conventional nondegradable surfactants in terms of the effect on the viscosity of increasing surfactant concentration. As the surfactants were hydrolyzed, systems with time-dependent viscosity were obtained. The viscosity either decreased monotonically or went through a maximum as a function of time, depending on the initial surfactant concentration. Different surfactant chain lengths gave rise to different viscosity profiles. The rate of hydrolysis, and thus the time-dependency of the surfactant concentration, could be controlled by changing the pH of the solution.

Journal Article↗

PubMed2005

Molecular information on the dissolution of polydisperse polymers: Mixtures of long and short poly(ethylene oxide).

A systematic study of the dissolution of dry, polydisperse poly(ethylene oxide) (PEO) samples, obtained from mixtures of low-molecular-weight and high-molecular-weight PEO, was made. During the dissolution process, the individual release of the low- and high-molecular-weight fractions was monitored. The high-molecular-weight/low-molecular-weight ratio controls the release rate, and the fraction of high-molecular-weight polymers dominates the effect on the overall release rate in mixed PEO tablets. Both fractions are released at the same rate during the main part of the dissolution process; however, during the initial dissolution period a fractionation occurs. The release rate is not a unique function of the average molecular weight of the polymer, but also depends on the polydispersity. By contrast, the average dimension of a polymer coil, as given by the intrinsic viscosity, gives a good prediction of the release rate irrespective of the polydispersity or details of the molecular weight distribution.

Molecular Weight↗

PubMed2005

Added surfactant can change the phase behavior of aqueous polymer-particle mixtures.

The phase behavior of aqueous mixtures of the "clouding" polymer ethyl(hydroxyethyl)cellulose (EHEC) mixed with colloidal particles and surfactants has been studied. These types of mixtures are important in many technical formulations. Two types of particles, polystyrene latex and silica, and two types of EHEC, nonmodified EHEC (N-EHEC) and hydrophobically modified EHEC (HM-EHEC), were studied. The EHECs adsorb to both kinds of particles. Both the amount and the type of added surfactant were seen to dramatically influence the partitioning of the particles between the EHEC-rich and EHEC-poor phases of phase-separated mixtures (above the cloud point temperature). Surfactants that are known not to associate with the EHEC backbone, that is, nonionic surfactants and short-chain cationic surfactants, changed the interaction between EHEC and the colloidal particles from attraction to repulsion above a specific surfactant concentration, resulting in a change in the partitioning of the particles from the EHEC-rich to the EHEC-poor phase. No such particle inversion was observed for ionic surfactants that bind to the EHEC backbone. An analysis considering both the binding of surfactant to EHEC and the competitive adsorption of surfactant to the particle surfaces could rationalize all observations, including the large variations observed, among the studied mixtures, in the surfactant concentration required for particle inversion.

Cellulose↗

PubMed2005

Reswelling of polyelectrolyte hydrogels by oppositely charged surfactants.

The interactions between charged alkylacrylamide gels of varying hydrophobicity and charge density and the oppositely charged surfactant hexadecyltrimethylammonium (C16TA+) have been investigated to determine the conditions necessary to induce excess surfactant binding (beyond charge neutralization) and resolubilization of the polymer-surfactant complex. In all cases, an initial gel collapse occurred due to neutralization of the charges in the gel, and the volume of the collapsed gel was smaller than that of the corresponding neutral gel at the same surfactant concentration, as a result of the formation of interchain micellar cross-links. For gels containing neutral repeating units that were found previously to bind C16TA+, a subsequent sharp reswelling of the gel network occurred, beginning at a critical surfactant concentration called the cac(2). The reswelling is due to binding of excess surfactant, which results in the gels becoming recharged. For gels whose neutral repeating units do not bind C16TA+, there was no reswelling behavior (no cac(2)), but there was a gradual increase of the swelling back to that of the equivalent neutral gel with increasing surfactant concentration. The results are interpreted in terms of the expected surfactant binding isotherm.

Journal Article↗

PubMed2005

Hydrophobicity and counterion effects on the binding of ionic surfactants to uncharged polymeric hydrogels.

Gel swelling experiments have been used to study the binding of ionic surfactants to a series of nonionic alkylacrylamide hydrogels of increasing hydrophobicity. The binding of hexadecyl trimethylammonium (C16TA+) to uncharged gels is sensitive to both the hydrophobicity of the gel and the counterion to the surfactant. There is a minimum hydrophobicity threshold below which binding of the surfactant does not occur, and this is influenced by the counterion to the surfactant. The surfactant concentration at the onset of binding, the critical association concentration (cac), decreases with increasing gel hydrophobicity. The maximum swelling of the gel (at intermediate network hydrophobicity) increases in the order of the Hofmeister series of anions, bromide (Br-) < chloride (Cl-) < acetate (Ac-). At higher gel hydrophobicity, differences in swelling are no longer observed on changing the counterion. A minimum hydrophobicity threshold was also found for the binding of the anionic surfactants sodium dodecyl sulfate (SDS) and sodium dodecyl-di(ethylene oxide)-sulfate (SD-(EO)2-S). Differences in the swelling behavior with network hydrophobicity are explained in terms of the degree of saturation of the gel with surfactant at the cmc.

Journal Article↗

PubMed2005

Particle-induced phase separation in mixed polymer solutions.

The influence of added colloidal particles on the phase separation of mixed aqueous polymer solutions is investigated. Two types of particles (polystyrene latex or silica) and different combinations of segregating polymers (dextran of varying molar mass combined with poly(ethylene oxide) (PEO) of varying molar mass, or Ucon, a copolymer of ethylene oxide and propylene oxide) were used. All systems displayed particle-induced instability effects, but the extent of the effect varied strongly between the various combinations and with the amount of added salt. Very large instability effects were seen in certain mixtures. Two mechanisms, both relying on the adsorption of at least one of the polymers to the particle surface, seem to operate. Close to the cloud-point curve of the particle-free polymer1/polymer2/water mixture, adsorption of PEO or Ucon to the particles gives rise to a capillary-induced phase separation. Close to the dextran/water axis of the phase diagram, the adsorbing polymer gives rise to a surface modification of the particles, which then interacts repulsively with the surrounding dextran solution.

Journal Article↗

PubMed2005

Tuning the polymer release from hydrophilic matrix tablets by mixing short and long matrix polymers.

In this work a rotating disc method was developed for studying the dissolution process of "bimodal" polymer tablets, whose dissolution rates have been tuned by mixing low-molecular weight and high-molecular weight samples of poly(ethylene oxide) in various proportions. The tablets were prepared along different routes, by mixing the polymer fractions as powders or by mixing on a molecular level so that the effect of tablet heterogeneity could be assessed, but also by purifying the original powders so the effect of additives could be determined. When the mixed tablet was dominated by the low-molecular weight fraction, a faster dissolution was observed for the tablet mixed at the powder level. In those cases small gel pieces were released from the tablet during the whole dissolution process. As long as no gel piece erosion was observed, it did not matter if the two polymer fractions were blended on the molecular level or on the powder level, the steady-state dissolution rate was the same. The presence of small amounts of additives in the nonpurified commercial samples had no significant effect on the tablet dissolution within the uncertainty of the experiment.

Calorimetry, Differential Scanning↗

PubMed2004

Gels of hydrophobically modified ethyl(hydroxyethyl) cellulose cross-linked by amylose: effects of hydrophobe architecture.

Previous work has shown that amylose (AM) can cross-link hydrophobically modified polymers by inclusion complexation, whereby thermoreversible cold-setting gels are formed. Here we investigate the complexation of AM with different samples of hydrophobically modified ethyl(hydroxyethyl) cellulose (HMEHEC), distinguished by differences in the architecture of the hydrophobes (the hydrophobic side chains). All hydrophobes, except one, were based on linear alkyl chains, but with varying chain lengths (C12-C14). In addition, some samples contained short hydrophilic "spacers", consisting of 2-5 ethylene oxide units, between the alkyl chains and the EHEC backbone. Gels of varying strength were obtained for the different AM/HMEHEC samples. The alkyl chain length seemed to be the major factor affecting the gel strength, with longer alkyl chains giving stronger gels. For similar alkyl chain lengths, stronger gels were obtained when a spacer was present. Addition of AM caused a small increase of the cloud points of HMEHECs with C14 hydrophobes in water. Time-dependent effects and effects of the sample preparation procedure were also investigated. The reversibility of the gelation with respect to shear was confirmed. A gel destroyed by added surfactant was shown to reform on removal of the surfactant by dialysis.

Journal Article↗