Biomedical subjects

Leonard Stoica

Publications and source records attributed to Leonard Stoica.

4 recordsLinked to original sources

PubMed2006

Direct electron transfer--a favorite electron route for cellobiose dehydrogenase (CDH) from Trametes villosa. Comparison with CDH from Phanerochaete chrysosporium.

This paper presents some functional differences as well as similarities observed when comparing the newly discovered cellobiose dehydrogenase (CDH) from Trametes villosa (T.v.) with the well-characterized one from Phanerochaete chrysosporium (P.c.). The enzymes were physically adsorbed on spectrographic graphite electrodes placed in an amperometric flow through cell connected to a flow system. In the case of T.v.-CDH-modified graphite electrodes, a high direct electron transfer (DET) current was registered at the polarized electrode in the presence of the enzyme substrate reflecting a very efficient internal electron transfer (IET) process between the reduced FAD-cofactor and the oxidized heme-cofactor. In the case of P.c.-CDH-modified graphite electrodes, the DET process is not as efficient, and the current will greatly increase in the presence of a mediator (mediated electron transfer, MET). As a consequence, when comparing the two types of enzyme-modified electrodes an inverted DET/MET ratio for T.v.-CDH is shown, in comparison with P.c.-CDH. The rates of the catalytic reaction were estimated to be comparable for both enzymes, by measuring the combined DET + MET currents. The inverted DET/MET ratio for T.v.-CDH-modified electrodes might suggest that probably there is a better docking between the two domains of this enzyme and that the linker region of P.c.-CDH might have an active role in modulating the rate of the IET (by changing the interdomain distance), with respect to pH. Based on the new properties of T.v.-CDH emphasized in the present study, an analytical application of a third-generation biosensor for lactose was recently published.

Adsorption↗

PubMed2006

Third-generation biosensor for lactose based on newly discovered cellobiose dehydrogenase.

The present paper describes the principle and characteristics of a biosensor for lactose based on a third-generation design involving cellobiose dehydrogenase. As resulted from a previous comparative study (submitted manuscript), the novelty of this lactose biosensor is based on highly efficient direct electron transfer between two newly discovered cellobiose dehydrogenases (CDH), from the white rot fungi Trametes villosa and Phanerochaete sordida, and a solid spectrographic graphite electrode. CDH was immobilized on the electrode surface (0.073 cm2) by simple physical adsorption, and the CDH-modified electrode was next inserted into a wall-jet amperometric cell connected on-line to a flow injection setup (0.5 mL x min(-1)). The P. sordida CDH-based lactose biosensor, proved to be the better one, has a detection limit for lactose of 1 microM, a sensitivity of 1100 microA x mM(-1) x cm(-2), a response time of 4 s (the time required to obtain the maximum peak current), and a linear range from 1 to 100 microM lactose (correlation coefficient 0.998). The simplicity of construction and analytical characteristics make this CDH-based lactose biosensor an excellent alternative to previous lactose biosensors reported in the literature or commercially available. The CDH-lactose sensor was used to quantify the content of lactose in pasteurized milk, buttermilk, and low-lactose milk, using the standard addition method. No effects of the samples matrixes were observed. The operational stability of the sensor was tested for 11 h by continuous injection of 100 microM lactose (290 injections). The final signal of the sensor was maintained at 98% of its initial signal, with a low standard deviation of 1.72 (RSD 2.41%).

Animals↗

PubMed2005

Electrochemical investigation of cellobiose dehydrogenase from new fungal sources on Au electrodes.

Following previous electrochemical investigations of cellobiose dehydrogenase (CDH), the present investigation reports on the initial screening of the electrochemistry of three new CDHs, two from the white rot basidiomycetes Trametes villosa and Phanerochaete sordida and one from the soft rot ascomycete Myriococcum thermophilum, for their ability to directly exchange electrons with 10 different alkanethiol-modified Au electrodes. Direct electron transfer (DET) between the enzymes and some of the modified Au electrodes was shown, both, in the presence and in the absence of cellobiose. However, the length and the head functionality of the alkanethiols drastically influenced the efficiency of the DET reaction and also influenced the effect of pH on the biocatalytic/redox currents, suggesting the importance of structural/sequence differences between these CDH enzymes. In this respect, the white rot CDHs exhibit excellent biocatalytic and redox currents, whereas for the soft rot CDH the DET communication is much less efficient. Cyclic voltammograms indicate that the heme domain of the CDHs is the part of the enzymes that most readily exchanges electrons with the electrode. However, for P. sordida CDH on 11-mercaptoundecanol or dithiopropionic acid-modified Au electrodes, a second voltammetric wave was noticed suggesting that for some orientations of the enzyme, DET communication with the FAD cofactor can also be obtained.

Biosensing Techniques↗

PubMed2004

Biosensor based on cellobiose dehydrogenase for detection of catecholamines.

A cellobiose dehydrogenase (CDH)-modified graphite electrode was designed for amperometric detection of catecholamines in the flow injection mode, by their recycling between the graphite electrode (+300 mV vs Ag|AgCl) and the reduced FAD cofactor of adsorbed CDH, resulting in an amplified response signal. The high efficiency of the enzyme-catecholamine reaction leads to a detection limit below 1 nM and a sensitivity of 15.8 A.M(-1) x cm(-2) (approximately 1150 nA/microM) for noradrenaline, with a coverage of less than 2.5 microg of CDH adsorbed on the electrode surface (0.073 cm(2)). Working parameters such as pH, cellobiose concentration, carrier buffer, and applied potential were optimized, using hydroquinone as a model analyte. The sensitivity, linear range, and amplification factor can be modulated by the steady-state concentration of cellobiose in the flow buffer. The response of the sensor decreases only 2% when run continuously for 4 h in the flow injection mode. The response peak maximum is obtained within 6 s at a flow rate of 0.5 mL/min, representing the time of the entire sample segment to pass the electrode. CDH enzymes from Phanerochaete chrysosporium and Sclerotium rolfsii were investigated, providing different characteristics of the sensor, with sensors made with CDH from P. chrysosporium being the better ones.

Biosensing Techniques↗