PubMed Health⌕ Search

Biomedical subjects

Leroy Cronin

Publications and source records attributed to Leroy Cronin.

At least 19 recordsLinked to original sources
PubMed2006

Experimental and theoretical investigations of the sulfite-based polyoxometalate cluster redox series: alpha- and beta-[Mo(18)O(54)(SO(3))(2)](4-/5-/6-).

The synthesis, isolation and structural characterization of the sulfite polyoxomolybdate clusters alpha-(D(3h))(C(20)H(44)N)(4){alpha-[Mo(18)O(54)(SO(3))(2)]}CH(3)CN and beta-(D(3d))(C(20)H(44)N)(4){beta-[Mo(18)O(54)(SO(3))(2)]}CH(3)CN is presented. Voltammetric studies in acetonitrile (0.1 M Hx(4)NClO(4), Hx(4)N=tetra-n-hexylammonium) reveal the presence of an extensive series of six one-electron reduction processes for both isomers. Under conditions of bulk electrolysis, the initial [Mo(18)O(54)(SO(3))(2)](4-/5-) and [Mo(18)O(54)(SO(3))(2)](5-/6-) processes produce stable [Mo(18)O(54)(SO(3))(2)](5-) and [Mo(18)O(54)(SO(3))(2)](6-) species, respectively, and the same reduced species may be produced by photochemical reduction. Spectroelectrochemical data imply that retention of structural form results upon reduction, so that both alpha and beta isomers are available at each of the 4-, 5-, and 6-redox levels. However, the alpha isomer is the thermodynamically favored species in both the one- and two-electron-reduced states, with beta-->alpha isomerization being detected in both cases on long time scales (days). EPR spectra also imply that increasing localization of the unpaired electron occurs over the alpha- and beta-[Mo(18)O(54)(SO(3))(2)](5-) frameworks as the temperature approaches 2 K where the EPR spectra show orthorhombic symmetry with different g and hyperfine values for the alpha and beta isomers. Theoretical studies support the observation that it is easier to reduce the alpha cluster than the beta form and also provide insight into the driving force for beta-->alpha isomerization in the reduced state. Data are compared with that obtained for the well studied alpha-[Mo(18)O(54)(SO(4))(2))](4-) sulfate cluster.

Journal Article↗
PubMed2006

Polyoxometalate clusters, nanostructures and materials: from self assembly to designer materials and devices.

Polyoxometalates represent a diverse range of molecular clusters with an almost unmatched range of physical properties and the ability to form structures that can bridge several length scales. The new building block principles that have been discovered are beginning to allow the design of complex clusters with desired properties and structures and several structural types and novel physical properties are examined. In this critical review the synthetic and design approaches to the many polyoxometalate cluster types are presented encompassing all the sub-types of polyoxometalates including, isopolyoxometalates, heteropolyoxometalates, and reduced molybdenum blue systems. As well as the fundamental structure and bonding aspects, the final section is devoted to discussing these clusters in the context of contemporary and emerging interdisciplinary interests from areas as diverse as anti-viral agents, biological ion transport models, and materials science.

Journal Article↗
PubMed2006

Formation of p-phenylenediamine-crown ether-[PMo12O40]4- salts.

Electron transfer from the electron donor of p-phenylenediamine (PPD) to the electron acceptor of (H+)3[PMo12O40]3- forms a one-electron-reduced Keggin cluster of [PMo12O40]4-, bearing a S = 1/2 spin, while proton transfer from the proton donor of (H+)3[PMo12O40]3- to the proton acceptor of PPD yielded mono- and diprotonated cations of 4-aminoanilinium (HPPD+) and p-phenylenediammonium (H2PPD2+). By introduction of crown ether receptors during the crystallization process, supramolecular cations of (HPPD+)(crown ethers) and/or (H2PPD2+)(crown ethers) were successfully introduced into three new alpha-[PMo12O40]4- salts of (H2PPD2+)2([12]crown-4)4[PMo12O40]4- (1), (HPPD+)4([15]crown-5)4[PMo12O40]4- (2), and (HPPD+)2(H2PPD2+)([18]crown-6)4[PMo12O40]4- (3) as the countercation. The protonated states of PPD and molecular-assembly structures of the supramolecular cations depended on the size of the crown ethers. In salt 3, a novel mixed-protonated state of HPPD+ and H2PPD2+ was confirmed to be complexed in the cation structure. According to the changes in the cation structures, the anion arrangements were modulated from those of the two-dimensional layer for salt 1 to the isolated cluster for salts 2 and 3. The temperature-dependent magnetic susceptibilities of salts 1-3 were consistent with the isolated spin arrangements of [PMo12O40]4-. The electronic spectra of salts 1-3 indicated the intervalence optical transition from pentavalent Mo(V) to hexavalent Mo(VI) ions within the [PMo12O40]4- cluster. Temperature-dependent electron spin resonance spectra of salt 2 revealed the delocalization-localization transition of the S = 1/2 spin at 60 K. The spin on the [PMo12O40]4- cluster was localized on a specific Mo(V) site below 60 K, which was thermally activated with an activation energy of 0.015 eV.

Journal Article↗
PubMed2006

Microcalorimetry of interaction of dihydro-imidazo-phenanthridinium (DIP)-based compounds with duplex DNA.

Isothermal titration (ITC) and differential scanning calorimetry (DSC) have been used to screen the binding thermodynamics of a family of DNA intercalators based on the dihydro-imidazo-phenanthridinium (DIP) framework. All members of this DIP-based ligand family bind to both genomic (calf thymus and/or salmon testes) and a synthetic dodecamer d(CGCGAATTCGCG) duplex DNA with broadly similar affinities regardless of side chain size or functionality. Viscosity measurements confirm that binding satisfies standard criteria for intercalation. Binding is exothermic but with an additional favourable positive entropy contribution in most cases at 25 degrees C, although a significant negative heat capacity effect (DeltaC(p)) means that both DeltaH(0) and DeltaS(0) decrease with increasing temperature. DIP-ligand binding to DNA also shows significant entropy-enthalpy compensation effects that are now almost standard in such situations, probably reflecting the conformational flexibility of macromolecular systems involving a multiplicity of weak non-covalent interactions. This ability to vary side chain functionality without compromising DNA binding suggests that the DIP framework should be a promising basis for more adventurous chemistry at the DNA level.

Calorimetry↗
PubMed2006

Towards polyoxometalate-integrated nanosystems.

Polyoxometalates represent a diverse range of molecular clusters with an almost unmatched range of physical properties and the ability to form structures that can bridge several length scales. The new building block principles that have been discovered are beginning to allow the design of complex clusters with desired properties and structures; several structural types and novel physical properties are examined herein. The overall message that is presented throughout is the possibility that polyoxometalate clusters could be excellent candidates to be exploited in the development of functional nanosystems or nanodevices. The concepts that underpin the development of nanoscale devices are discussed briefly, as are the considerable challenges that must be overcome to realise polyoxometalate-based functional nanosystems.

Journal Article↗
PubMed2006

Inorganic crown: the host-guest chemistry of a high nuclearity 'Celtic-ring' isopolyoxotungstate [H12W36O120]12-.

A range of complexes based on the high-nuclearity [W36] isopolyoxotungstate cluster, [H12W36O120]12-, with a triangular topology has been isolated by using the organic cation, protonated triethanolamine. In analogy to an 18-crown-6 crown ether with six oxygen donors on a ring, the cluster can form alkali and alkaline earth metal complexes [M within W36] (M = K+, Rb+, Cs+, NH4+, Sr2+ and Ba2+, 1-6, respectively). Compounds 1-6 were characterized by single-crystal X-ray diffraction, elemental analysis, IR spectroscopy. Comparisons between the structures of 1-6 and 18-crown-6 as well as the symmetry directing influence of the organo-cations in the isolation of the overall cluster architecture are discussed.

Journal Article↗
PubMed2006

Controlling aggregation of copper(II)-based coordination compounds: From mononuclear to dinuclear, tetranuclear, and polymeric copper complexes.

The use of a strategy combining ligand design and changes of reaction conditions has been investigated with the goal of directing the assembly of mononuclear, dinuclear, tetranuclear, and polymeric copper(II) complexes. As a result, closely related copper monomers, alkoxo dimers, and hydroxo cubanes, along with a carbonate-bridged polymeric species, have been synthesized using the rigid, aliphatic amino ligands cis-3,5-diamino-trans-hydroxycyclohexane (DAHC), cis-3,5-diamino-trans-methoxycyclohexane (DAMC), and the glutaryl-linked derivative glutaric acid bis-(cis-3,5-diaminocyclohexyl) ester (GADACE). The composition of the monomeric complex has been determined by X-ray crystallography as [Cu(DAHC)2](ClO4)2 (1), the two dimers as [{Cu(DAHC)(OMe)}2](ClO4)2.MeOH (2) and [{Cu(DAMC)(OMe)(ClO4)}2] (3), the three Cu4O4 cubanes as [{Cu(DAHC)(OH)}4](ClO4)(4).2.5MeOH (4), [{Cu(DAMC)(OH)}4](ClO4)4.H2O (5), and [{Cu2(OH)2(GADACE)}2]Cl4.2MeOH.6H2O (6), and an infinite-chain structure as [{Cu(DAHC)(CO3)}n] (7). Furthermore, the cubane structures 4 and 5 have been investigated magnetically. Our studies indicate that formation of the monomeric, dimeric, and tetranuclear DAHC and DAMC complexes can be controlled by small changes in reaction conditions and that further preorganization of the ligand moiety by linking the DAHC cores (GADACE) allows more effective direction of the self-assembly of the Cu4O4 cubane core.

Journal Article↗
PubMed2006

Dihydroimidazophenanthridinium (DIP)-based DNA binding agents with tuneable structures and biological activity.

We have synthesised a library of dihydroimidazophenanthridinium cations (DIPs) with large structural diversity (1-29) using a "one-pot" approach. The DNA binding constants of DIPs range from 2x10(4) to 1.3x10(5) M(-1), and the free energies for binding range from -5.9 to -6.40 kcal mol(-1). Viscosity measurements demonstrated that the binding of the compounds caused DNA lengthening, thus signifying binding by intercalation. The cytotoxicities of the compounds were determined by tetrazolium dye-based microtitration assays and showed a large range of values (0.09-11.7 microM). Preliminary molecular modelling studies of the DNA-DIP interactions suggested that the DIP moieties can interact with DNA by intercalation, and some R groups might facilitate binding by minor-groove binding. The results provide insight into how to design biologically active DNA binding agents that can interact in these ways.

Cell Line, Tumor↗
PubMed2005

Highly stable phenanthridinium frameworks as a new class of tunable DNA binding agents with cytotoxic properties.

A new class of cytotoxic heteroaromatic cations is presented, based on the dihydro-imidazo-phenanthridinium framework (DIP), that have affinity for DNA and cytotoxicity toward cancerous cells. The DIP framework is particularly tunable due to the flexible synthetic methodology. Furthermore, the central moiety has proved to be very stable to hydrolysis and reduction compared to other phenanthridinium-based agents.

Antineoplastic Agents↗
PubMed2005

Reactions of a {Mo16}-type polyoxometalate cluster with electrophiles: a synthetic, theoretical and magnetic investigation.

A medium-nuclearity mixed-valence polyoxomolybdate [H2Mo16O52]10-={Mo16}(1a) was synthesized using an approach that employed protonated hexamethylenetetramine (HMTAH+) as counter ion and yielded (HMTAH)10 1a.34 H2O (1). The {Mo16} cluster anion exhibits significant nucleophilicity and traps electrophiles such as divalent transition metal ions, resulting in a family of isostructural compounds based on {Mo16M2}-type anions [M(H2O)8H2Mo16O52]6- (M=FeII (2), MnII (3), CoII (4)). The highly reactive nature of the {Mo16} system is also revealed by rearrangement and decomposition reactions of to either slowly form a sodium-bridged heptamolybdate-based chain compound (5) when left in the reaction solution or, in the presence of very high concentrations of electrophiles, to heptamolybdate-based cluster compounds [M2(H2O)9Mo7O24]2- of the {M2Mo7}-type (M=FeII (6), MnII (7)). Compounds were characterised by single crystal X-ray diffraction, elemental analysis, IR spectroscopy, magnetic susceptibility measurements, and density functional theory calculations.

Journal Article↗
PubMed2005

Controllable growth of chains and grids from polyoxomolybdate building blocks linked by silver(I) dimers.

Molecular growth processes utilizing a beta-octamolybdate synthon and {Ag2} dimers are described and the directing influence of "encapsulating" cations and coordinating solvent is also demonstrated. The growth of two 1D chains, (nBu4N)2n[Ag2Mo8O26]n (1) and (nBu4N)2n[Ag2Mo8O26(CH3CN)2]n (2), is achieved when nBu4N+ ions are used, and the diameter of the chains can be expanded by the coordination of CH3CN solvent (2). The formation of a type of gridlike structure in which 1D chains are crossed-over each other in alternatively packed layers is achieved in DMSO as the solvent; DMSO acts as a linking group to give (nBu4N)2n[Ag2Mo8O26(dmso)2]n (3), which, similar to 1 and 2, still incorporates the Bu4N+ ions that exert an "encapsulating" influence. However, in (HDMF)n[Ag3(Mo8O26)(dmf)4]n (4) the relatively bulky Bu4N+ ions are exchanged for protonated DMF cations, thereby allowing the chains to condense to a 2D array. The building block concept is further enforced by the isolation of a "monomeric" unit (Ph4P)2[Ag2Mo8O26(dmso)4] (5), which is isolated when the Ph4P+ ions are so "encapsulating" as to prevent aggregation of the {Ag-Mo8-Ag} building blocks. The nature of the AgAg dimers in each of the compounds 1-4 is examined by DFT calculations and the interplay between these Ag-Ag interactions and the structure types is described.

Acetonitriles↗