Biomedical subjects
Publications and source records attributed to Li-Jun Wan.
Explore the source record for details and available documents.
Unconventional fullerenes are those smaller than C(60) or those intermediate between C(60) and C(70), which are not stable in structure as none of the unconventional fullerene isomers satisfying the "isolated-pentagon-rule" (IPR). Below we report the synthesis of a stable unconventional fullerene derivative C(64)H(4) by introducing methane in the fullerene productions with the normal Krätschmer-Huffman method. We also applied various spectroscopic measurements such as mass spectrometry, (13)C NMR, IR, UV-vis absorption spectrometry, etc. to characterize the structural and electronic properties of this molecule, revealing an unprecedented fullerene cage with a triplet of directly fused pentagons in the framework of C(64)H(4). Four hydrogen atoms are added to the carbons at vertexes of fused pentagons to allow the bond angles at these sites close to the sp(3) tetrahedral angle, which essentially release the sp(2) bond strains on the abutting-pentagon sites of C(64). Ab initio calculations were performed to explore the electronic property and simulate the (13)C NMR and IR spectra of this fulleride, which reproduced well the experimental results and confirmed the structural assignment of the C(64)H(4).
The effect of the molecular structure on the self-assembly of specially designed two-core 1,3,2-dioxaborines has been studied with various techniques. It was found that the molecules spontaneously adsorbed on HOPG surfaces and self-organized into well-ordered two-dimensional (2D) monolayers. The structural details of the 2D assemblies were investigated by scanning tunneling microscopy (STM). From X-ray analysis of the corresponding three-dimensional (3D) crystal and from theoretical calculation, we were able to reveal the driving force behind the specific self-assembly. The C-H...F hydrogen bonding between the ortho carbon of the phenyl ring and the fluorine of the BF2 group plays an important role in the formation of the adlayers. The different electron affinities and geometries of the molecules affect the intermolecular interactions which further lead to different properties in the bulk materials.
The adsorption of 4,4'-bipyridine (BiPy) on Cu(111) has been investigated in 0.1 M HClO4 by cyclic voltammetry, electrochemical scanning tunneling microscopy (STM), and surface-enhanced infrared adsorption spectroscopy (SEIRAS). Cyclic voltammetry showed the double layer region extending from -0.2 to 0.26 V and a pair of redox waves superposing on hydrogen evolution wave at more negative potentials. Diprotonated BiPy, BiPyH2(2+), is adsorbed flat on the Cu(111) (1 x 1) surface and forms a well-ordered monolayer with a (3 x 4) symmetry in the double-layer potential region. At more negative potential, BiPyH2(2+) is reduced to its monocation radical, BiPyH2(*+), and forms another well-ordered structure in which the radicals are stacked in molecular rows with a face-to-face self-dimer as the building unit. The SEIRA spectra of both BiPyH2(2+) and BiPyH2(*+) are dominated by gerade modes which should be IR-inactive for the centrosymmetric species. The breakdown of the selection rule of IR absorption is ascribed to the vibronic coupling associated with charge transfer between BiPyH2(2+) and the surface and between the radicals.
Two-dimensional (2D) assembling behaviors of the endohedral metallofullerene Y@C(82) on bare, C(60)-modified, and iodine-modified Au(111) surfaces have been investigated in 0.1 M HClO(4) solution employing electrochemical scanning tunneling microscopy (ECSTM). The results show that Y@C(82) molecules are mobile and aggregate to the terrace edges on bare and C(60)-modified Au(111) surfaces, but monodispersion of the Y@C(82) molecules is achieved on the iodine-modified Au(111) surface. The improvement of Y@C(82) dispersion on an iodine-modified gold surface is due to the strong Y@C(82)-substrate interactions. The modified-substrate method provides an effective strategy to disperse endohedral metallofullerenes.
Scanning tunneling microscopy (STM) was employed to investigate the adsorption of the linear-spacer-bridged ligands bis(pyrrol-2-yl-methyleneamine) (BPMB and BPMmB), and their Zn(II)-coordinated complexes, BPMB/Zn(II) and BPMmB/Zn(II), onto a Au(111) surface in 0.1 M HClO(4) solution. Both the ligands, with different spacer bridges, and their Zn(II) complexes adsorb onto the Au(111) surface and self-organize into highly ordered two-dimensional arrays. The complexes BPMB/Zn(II) and BPMmB/Zn(II) appear in helical and triangular conformations, respectively, consistent with their chemical structures. Although the metal complexes include ligands, the assembled structures and adlayer symmetries of the ligands and complexes are totally different. The structures and intramolecular features obtained by high-resolution STM imaging are discussed. The results should be important in fabricating surface supramolecular structures.
An electrochemical sensor for ultratrace nitroaromatic compounds (NACs) using mesoporous SiO2 of MCM-41 as sensitive materials is reported. MCM-41 was synthesized and characterized by scanning electron microscope, transmission electron microscopy, and small-angle X-ray diffraction. Glassy carbon electrodes modified with MCM-41 show high sensitivity for cathodic voltammetric detection of NACs (including 2,4,6-trinitrotoluene (TNT), 1,3,5-trinitrobenzene (TNB), 2,4-dinitrotoluene, and 1,3-dinitrobenzene) down to the nanomolar level. The high sensitivity is attributed to the strong adsorption of NACs by MCM-41 and large surface area of the working electrode resulting from MCM-41 modification. The voltammetric response is fast, and the detection of NACs can be finished within 14 s. SiO2 nanospheres were similarly used to modify glassy carbon electrodes for electrochemical detection of TNT and TNB. The detection limit of SiO2 nanosphere-modified electrodes is lower than that of MCM-41-modified electrodes, possibly due to the smaller surface area of SiO2 nanospheres than mesoporous MCM-41. The results show mesoporous SiO2-modified glassy carbon electrodes, particularly MCM-41-modified electrodes, open new opportunities for fast, simple, and sensitive field analysis of NACs.
Scanning tunneling microscopy (STM) has been employed to investigate the photoisomerization of azobis-(benzo-15-crown-5) on Au(111). A self-assembled monolayer of azobis-(benzo-15-crown-5) with a (3 x 7) symmetry was observed on Au(111). After ex-situ UV-light irradiation, a new adlayer structure with a different molecular arrangement could be seen on Au(111), although the domain size of the ordered packing is small. On the basis of a high-resolution STM image and photochemical reaction result, schematic models have been proposed for the original and ex-situ irradiated adlayers. After in-situ UV-light irradiation, the ordered arrays disappeared and many bright clusters emerged at domain boundaries. The results presented here provide direct evidence at the molecular level for a photochemical reaction.
A detailed study on the time-dependent organization of a decanethiol self-assembled monolayer (SAM) at a designed solution concentration onto a Au(111) surface has been performed with scanning tunneling microscopy (STM). The SAMs were prepared by immersing Au(111) into an ethanol solution containing 1 microM decanethiol with different immersion times. STM images revealed the formation process and adlayer structure of the SAMs. It was found that the molecules self-organized into adlayers from random separation to a well-defined structure. From 10 s, small domains with ordered molecular organization appeared, although random molecules could be observed on Au(111) at the very initial stage. At 30 s, the SAM consisted of uniform short stripes. Each stripe consisted of sets of decanethiol mainly containing eight molecules. With the immersion time increasing, the length of the stripes increased. At 5 min, the alkyl chains overlapped each other between the adjacent stripes, indicating the start of a stacked process. After immersing Au(111) in decanethiol solution for 3 days, a densely packed adlayer with a (radical 3 x radical 3)R30 degrees structure was observed. The formation process and structure of decanethiol SAMs are well related to sample preparation conditions. The wettability of the decanethiolate SAM-modified Au(111) surface was also investigated.
This account presents a summary of recent work describing the control and fabrication of self-organized molecular adlayers on solid substrates. These results demonstrate that molecules, under appropriate conditions, will self-organize into well-ordered monolayers on various solid surfaces. Using scanning tunneling microscopy (STM) to probe the structure of these molecular architectures, it is possible to determine the surface quality to single molecule resolution. The surface structures can be controlled by external stimuli such as electrode potential and UV-light. The ability to control how these adlayers form is important for constructing surface molecular architectures with useful properties.
A self-assembly technique assisted with surfactant is developed to fabricate one-dimensional (1D) nanostructure of zinc meso-tetra (4-pyridyl) porphyrin. The so-prepared nanostructure appears in a shape of hollow hexagonal nanoprism with uniform size. The length and aspect ratio of the nanoprisms is easily tunable by controlling the stoichiometric ratio of porphyrin over surfactant. The internal structure of the nanoprisms is well described by XRD. Furthermore, as a result of dispersivity and regular geometric shape, these nanoprisms can readily self-organize into an ordered, smectic three-dimensional (3D) architecture through simple evaporation of the solvent. The results should be significant in porphyrin crystallization and porphyrin application in optoelectronic device, catalysis, drug delivery, and molecular filtration.
The structure and conformation of three self-assembled supramolecular species, a rectangle, a square, and a three-dimensional cage, on Au111 surfaces were investigated by scanning tunneling microscopy. These supramolecular assemblies adsorb on Au111 surfaces and self-organize to form highly ordered adlayers with distinct conformations that are consistent with their chemical structures. The faces of the supramolecular rectangle and square lie flat on the surface, preserving their rectangle and square conformations, respectively. The three-dimensional cage also forms well-ordered adlayers on the gold surface, forming regular molecular rows of assemblies. When the rectangle and cage were mixed together, the assemblies separated into individual domains, and no mixed adlayers were observed. These results provide direct evidence of the noncrystalline solid-state structures of these assemblies and information about how they self-organize on Au111 surfaces, which is of importance in the potential manufacturing of functional nanostructures and devices.
The adsorption of plasma protein fibrinogen on the self-assembled monolayers (SAMs) of n-hexadecyl mercaptan and citrate was investigated with atomic force microscopy (AFM). On the basis of the preparation of these two flat SAMs on Au(111), high-resolution AFM images of bovine fibrinogen were obtained with different protein concentrations. The results indicated that the surface chemical composition significantly affected the adsorption behavior of fibrinogen. Since fibrinogen plays a key role in the regulation of both haemostasis and thrombosis, high-resolution AFM imaging on SAMs is expected to be an effective approach to study the haemocompatibility of materials with different surface chemistry.
Explore the source record for details and available documents.
Highly ordered Ni-Pt multilayered nanowire arrays have been fabricated using a porous anodic aluminum oxide (AAO) template by pulse electrodeposition. The cylindrical Ni nanoparticles with different lengths and diameters in these arrays were characterized by transmission electron microscope (TEM) and alternating-gradient magnetometer (AGM) measurements. Magnetization measurements revealed that an array of such nanowires with 20-nm diameters has an enhanced coercivity (ca. 1169 Oe) and a high remanence ratio (ca. 0.96).
Explore the source record for details and available documents.
A self-assembled supramolecular metallacyclic rectangle was investigated with scanning tunneling microscopy on highly oriented pyrolytic graphite and Au(111) surfaces. The rectangles spontaneously adsorb on both surfaces and self-organize into well ordered adlayers. On highly oriented pyrolytic graphite, the long edge of the rectangle stands on the surface, forming a 2D molecular network. In contrast, the face of the rectangle lays flat on the Au(111) surface, forming linear chains. The structures and intramolecular features obtained through high-resolution scanning tunneling microscopy imaging are discussed.
Explore the source record for details and available documents.