PubMed Health⌕ Search

Biomedical subjects

Li-Ping You

Publications and source records attributed to Li-Ping You.

10 recordsLinked to original sources

From trifluoroacetate complex precursors to monodisperse rare-earth fluoride and oxyfluoride nanocrystals with diverse shapes through controlled fluorination in solution phase.

We report the first systematic synthesis of monodisperse rare-earth (RE=La to Lu, Y) fluoride and oxyfluoride nanocrystals with diverse shapes (trigonal REF3 triangular, truncated-triangular, hexagonal, and polygonal nanoplates; orthorhombic REF3 quadrilateral and zigzag-shaped nanoplates; cubic REOF nanopolyhedra and nanorods) from single-source precursors (SSP) of [RE(CF(3)COO)(3)] through controlled fluorination in oleic acid (OA)/oleylamine (OM)/1-octadecene (ODE). To selectively obtain REF3 or REOF nanocrystals, the fluorination of the RE-O bond to the RE-F bond at the nucleation stage was controlled by finely tuning the ratio of OA/ODE or OA/OM, and the reaction temperature. For phase-pure REF3 or REOF naocrystals, their shape-selective syntheses could be realized by further modifying the reaction conditions. The two-dimensional growth of the REF3 nanoplates and the one-dimensional growth of the REOF nanorods were likely due to the selective adsorption of the capping ligands on specific crystal planes of the nanocrystals. Those well-shaped nanocrystals with diverse geometric symmetries (such as D(3h), D(6h), C(2h), O(h), and D(nh)) displayed a remarkable capability to form self-assembled superlattices. By manipulating the solvent-substrate combination, the plate-shaped REF3 nanocrystals could form highly ordered nanoarrays by means of either the face-to-face formation or the edge-to-edge formation. By using this SSP strategy, we also obtained high-quality LaF3:Eu and LaF3:Eu/LaF3 triangular nanoplates that showed photoluminescent red emissions of Eu3+ ions sensitive to the surface effect.

Crystallization↗

High-quality sodium rare-earth fluoride nanocrystals: controlled synthesis and optical properties.

We report a general synthesis of high-quality cubic (alpha-phase) and hexagonal (beta-phase) NaREF4 (RE: Pr to Lu, Y) nanocrystals (nanopolyhedra, nanorods, nanoplates, and nanospheres) and NaYF(4):Yb,Er/Tm nanocrystals (nanopolyhedra and nanoplates) via the co-thermolysis of Na(CF3COO) and RE(CF3COO)3 in oleic acid/oleylamine/1-octadecene. By tuning the ratio of Na/RE, solvent composition, reaction temperature and time, we can manipulate phase, shape, and size of the nanocrystals. On the basis of its alpha --> beta phase transition behavior, along the rare-earth series, NaREF4 can be divided into three groups (I: Pr and Nd; II: Sm to Tb; III: Dy to Lu, Y). The whole controlled-synthesis mechanism can be explained from the point of view of free energy. Photoluminescent measurements indicate that the value of I610/I590 and the overall emission intensity of the NaEuF4 nanocrystals are highly correlative with the symmetries of the Eu3+ ions in both the lattice and the surface.

Journal Article↗

Self-organized monolayer of nanosized ceria colloids stabilized by poly(vinylpyrrolidone).

Four nanometer colloidal ceria nanocrystals in a fluorite cubic structure have been synthesized via an alcohothermal treatment at 180 degrees C for 24 h from Ce(NO(3))(3)*6H(2)O in ethanol, using various alkylamines including triethylamine, butylamine, and hexadecylamine as the bases and poly(vinylpyrrolidone) (PVP) as the stabilizer. They were characterized by multiple measurements of X-ray diffraction (XRD), transmission electron microscopy (TEM), high-resolution TEM (HRTEM), ultraviolet visible (UV-vis) spectroscopy, dynamic light scattering (DLS), and infrared spectroscopy (IR). The introduction of PVP could effectively stabilize the cerium nuclei against self-aggregation and finally lead to the formation of the CeO(2) colloids. As compared with that of their precipitated counterparts, the UV-vis spectra showed a blue-shifted absorption edge for the as-obtained colloidal nanocrystals, revealing that their surfaces were well-passivated by PVP. Four types of self-organized monolayer patterns (i.e., isolated particles, short chainlike (pseudo-1-D aggregated), pearl necklace-like (1-D aggregated), and dendritic (pseudo-2-D aggregated) alignments) appeared for the as-obtained colloidal particles on the copper TEM grids, due to the delicate balance of the attractive and repulsive forces between the PVP-passivated CeO(2) nanocrystals during the irreversible evaporation of the solvent from various colloidal solutions under ambient conditions. The type of alkylamine and the concentration of PVP were confirmed to be the crucial factors determining the oriented-aggregation dimensionality of the CeO(2) colloids. Possible interparticle interaction modes have been suggested to explain such complex self-organization patterns exhibited by the as-obtained CeO(2) nanocrystals.

Journal Article↗

Hierarchical assembly of SnO2 nanorod arrays on alpha-Fe2O3 nanotubes: a case of interfacial lattice compatibility.

SnO2 nanorod arrays were hierarchically assembled onto the surface of alpha-Fe2O3 nanotubes via a facile solution method. Determined by the hexagonal geometrical nature of the alpha-Fe2O3 nanotubes, the heterostructures were of 6-fold symmetry. HRTEM characterizations demonstrated that the lattice mismatch at the interface was an important factor in determining the growth direction of the secondary nanorod arrays.

Journal Article↗

Single-crystalline and monodisperse LaF3 triangular nanoplates from a single-source precursor.

Single-crystalline and monodisperse LaF3 triangular nanoplates (2.0 x 16.0 nm) in trigonal tysonite structure were synthesized by the thermolysis of a single-source precursor (SSP), La(CF3COO)3, in a hot oleic acid/octadecene solution. The combined use of SSP and coordinating and noncoordinating solvents was demonstrated to have played key roles in the formation of such high-quality nanoplates, which could spontaneously organize into two types of superlattices (edge-to-edge and face-to-face) on a large area. This SSP approach has advantages of one-step, mass production, and easy operation, and may represent a rather general route toward metal fluoride nanocrystals.

Journal Article↗

Selective synthesis of monazite- and zircon-type LaVO(4) nanocrystals.

Pure monoclinic (m-) and tetragonal phased (t-) LaVO(4) nanocrystals could be obtained by a hydrothermal method in a controllable way with additives. It is found that chelating ligands, such as ethylenediaminetetraacetic acid [EDTA or H(4)L, where L(4-) = (CH(2)COO)(2)N(CH(2))(2)N(CH(2)COO)(2)(4-)], favor the formation of t-LaVO(4) and can induce the polymorph transformation from stable m-LaVO(4) to metastable t-LaVO(4). Further studies demonstrated the important roles of chelating ligands in this transformation process. Careful investigation over the phase transition from t- to m-LaVO(4) was also conducted with high-temperature X-ray diffraction (HTXRD) studies. The phase transition occurred at 850 degrees C, which is about 250 degrees C higher than for the bulk. The enhanced thermal stability of the nanosized metastable t-LaVO(4) may come from the small size effect. Our capability of obtaining and stabilizing t-LaVO(4) not only benefits the wider applications based on LaVO(4) due to the improved luminescent and catalytic performance but also provides a new idea in the studies of polymorph control and selective synthesis of inorganic materials.

Journal Article↗

Systematic synthesis and characterization of single-crystal lanthanide orthophosphate nanowires.

A simple hydrothermal method has been developed for the systematic synthesis of lanthanide orthophosphate crystals with different crystalline phases and morphologies. It has been shown that pure LnPO(4) compounds change structure with decreasing Ln ionic radius: i.e., the orthophosphates from Ho to Lu as well as Y exist only in the tetragonal zircon (xenotime) structure, while the orthophosphates from La to Dy exist in the hexagonal structure under hydrothermal treatment. The obtained hexagonal structured lanthanide orthophosphate LnPO(4) (Ln = La, Ce, Pr, Nd, Sm, Eu, Gd, Tb, and Dy) products have a wirelike morphology. In contrast, tetragonal LnPO(4) (Ln = Ho, Er, Tm, Yb, Lu, Y) samples prepared under the same experimental conditions consist of nanoparticles. The obtained hexagonal LnPO(4) (Ln = La --> Tb) can convert to the monoclinic monazite structured products, and their morphologies remained the same after calcination at 900 degrees C in air (Hexagonal DyPO(4) is an exceptional case, it transformed to tetragonal DyPO(4) by calcination), while the tetragonal structure for (Ho--> Lu, Y)PO(4) remains unchanged by calcination. The resulting LnPO(4) (Ln = La --> Dy) products consist almost entirely of nanowires/nanorods with diameters of 5-120 nm and lengths ranging from several hundreds of nanometers to several micrometers. Europium doped LaPO(4) nanowires were also prepared, and their photoluminescent properties were reported. The optical absorption spectrum of CePO(4) nanowires was measured and showed some differences from that of bulk CePO(4) materials. The possible growth mechanism of lanthanide phosphate nanowires was explored in detail. X-ray diffraction, field-emission scanning electron microscopy, transmission electron microscopy, electron diffraction, infrared absorption spectra, X-ray photoelectron spectroscopy, optical absorption spectra, and photoluminescence spectra have been employed to characterize these materials.

Journal Article↗

A simple method to synthesize Dy(OH)(3) and Dy(2)O(3) nanotubes.

Here we report the first synthesis of Dy(OH)(3) nanotubes by facile hydrothermal treatment of bulky Dy(2)O(3) crystals. Dy(OH)(3) nanotubes were calcined to produce Dy(2)O(3) nanotubes. Ho(OH)(3) and Ho(2)O(3) nanotubes were also obtained by the same method. The growth of nanotubes occurred through a dissolution-recrystallization process.

Journal Article↗