Biomedical subjects

Li-Qiong Wang

Publications and source records attributed to Li-Qiong Wang.

8 recordsLinked to original sources

PubMed2006

A new class of silica cross-linked micellar core-shell nanoparticles.

Micellar nanoparticles made of surfactants and polymers have attracted wide attention in the materials and biomedical community for controlled drug delivery, molecular imaging, and sensing; however, their long-term stability remains a topic of intense study. Here we report a new class of robust, ultrafine silica core-shell nanoparticles formed from silica cross-linked, individual block copolymer micelles. Compared with pure polymeric micelles, the main advantage of the new core-shell nanoparticles is that they have significantly improved stability and do not break down during dilution. We also studied the drug loading and release properties of the silica cross-linked micellar particles, and we found that the new core-shell nanoparticles have a slower release rate which allows the entrapped molecules to be slowly released over a much longer period of time under the same experimental conditions. A range of functional groups can be easily incorporated through co-condensation with the silica matrix. The potential to deliver hydrophobic agents into cancer cells has been demonstrated. Because of their unique structures and properties, these novel core-shell nanoparticles could potentially provide a new nanomedicine platform for imaging, detection, and treatment, as well as novel colloidal particles and building blocks for mutlifunctional materials.

Antineoplastic Agents↗

PubMed2005

Inhibition of aluminum oxyhydroxide precipitation with citric acid.

Citric acid has been shown to act as an agent for increasing the solubility of aluminum oxyhydroxides in aqueous solutions of high (>2.47 mol/mol) hydroxide-to-aluminum ratios. Conversely, citric acid also colloidally stabilizes particles in aqueous suspensions of aluminum-containing particles. Solutions of aluminum chloride, with and without citric acid added, were titrated with NaOH(aq). The presence and size of particles were determined using quasi-elastic light scattering. In solutions that contained no citric acid, particles formed instantaneously when NaOH(aq) was added but these were observed to rapidly diminish in size, disappearing at OH/Al ratios below 2.5 mol/mol. When the OH/Al ratio was raised beyond 2.5 by adding more NaOH(aq), suspensions of colloidally stable particles formed. Large polycations containing 13 aluminum atoms were detected by (27)Al solution NMR in citric-acid-free solutions with OH/Al ratios slightly lower than 2.5. In comparison, adding citric acid to solutions of aluminum chloride inhibited the formation of large aluminum-containing polycations. The absence of the polycations prevents or retards the subsequent formation of particles, indicating that the polycations, when present, act as seeds to the formation of new particles. Particles did not form in solutions with a citric acid/aluminum ratio of 0.8 until sufficient NaOH(aq) was added to raise the OH/Al ratio to 3.29. By comparison, lower amounts of citric acid did not prevent particles from forming but did retard the rate of growth.

Journal Article↗

PubMed2005

Nuclear magnetic resonance studies of resorcinol-formaldehyde aerogels.

In this article, we report a detailed study of resorcinol-formaldehyde (RF) aerogels prepared under different processing conditions, [resorcinol]/[catalyst] (R/C) ratios in the starting sol-gel solutions, using continuous flow hyperpolarized (129)Xe NMR in combination with solid-state (13)C and two-dimensional wide-line separation (2D-WISE) NMR techniques. The degree of polymerization and the mobility of the cross-linking functional groups in RF aerogels are examined and correlated with the R/C ratios. The origin of different adsorption regions is evaluated using both coadsorption of chloroform and 2D EXSY (129)Xe NMR. A hierarchical set of Xe exchange processes in RF aerogels is found using 2D EXSY (129)Xe NMR. The exchange of Xe gas follows the sequence (from fastest to slowest): mesopores with free gas, gas in meso- and micropores, free gas with micropores, and, finally, among micropore sites. The volume-to-surface-area (V(g)/S) ratios for aerogels are measured for the first time without the use of geometric models. The V(g)/S parameter, which is related both to the geometry and the interconnectivity of the pore space, has been found to correlate strongly with the R/C ratio and exhibits an unusually large span: an increase in the R/C ratio from 50 to 500 results in about a 5-fold rise in V(g)/S.

Journal Article↗

PubMed2005

Adsorption and reaction of CO and CO2 on oxidized and reduced SrTiO3(100) surfaces.

The adsorption and reaction of CO and CO(2) on oxidized and reduced SrTiO(3)(100) surfaces have been studied with temperature programmed desorption (TPD) and X-ray photoelectron spectroscopy (XPS). XPS results indicate that the oxidized SrTiO(3)(100) surfaces are nearly defect-free with predominantly Ti(4+) ions whereas the sputter-reduced surfaces contain substantial amounts of defects. Both CO and CO(2) are found to adsorb weakly on the oxidized SrTiO(3)(100) surfaces. On sputter-reduced surfaces, enhanced reactivity of CO and CO(2) is observed due to the presence of oxygen vacancy sites, which are responsible for dissociative adsorption of these molecules. Our studies indicate that the CO and CO(2) molecules exhibit relatively weaker interactions with SrTiO(3)(100) compared to those with TiO(2)(110) and TiO(2)(100) surfaces. This is most likely an influence of the Sr cations on the electronic structure of the Ti cations in the mixed oxide of SrTiO(3).

Journal Article↗

PubMed2005

Hygroscopic growth of self-assembled layered surfactant molecules at the interface between air and organic salts.

We report here the self-assembly of surfactant molecules at the interface of air and the hygroscopic quaternary ammonium salt tetrabutylammonium acetate (TBAAc). Homogeneously dissolved surfactant molecules at 100 degrees C self-assemble upon contacting air due to high moisture adsorption by the organic salt when cooling down. Highly ordered lamellar phases with different lattice spacings have been observed when surfactants with various lengths of alkyl chains were used. C(n)TMAB/TBAAc systems showed all-trans conformation of interior methylene carbons and interdigited bilayers with an average CH2 increment of 0.119 nm, while C(n)NH2/TBAAc systems showed trans/gauche mixed conformations of interior methylene carbons and bilayers with an average CH2 increment of 0.247 nm. C(n)NH2s in C(n)NH2/TBAAc formed bilayers through water-mediated intermolecular hydrogen bonds with a water layer thickness of 0.51-0.61 nm. In C(n)TAB/TBAAc, as the head group of C(n)TAB is bigger, the interdigited bilayer thickness (d-spacing) is smaller, because the bigger head groups accommodate enough space for alkyl tails to come in between them.

Journal Article↗

PubMed2005

Adsorption and reaction of methanol on stoichiometric and defective SrTiO3(100) surfaces.

The adsorption and reaction of methanol (CH(3)OH) on stoichiometric (TiO(2)-terminated) and reduced SrTiO(3)(100) surfaces have been investigated using temperature-programmed desorption (TPD), X-ray photoelectron spectroscopy (XPS), and first-principles density-functional calculations. Methanol adsorbs mostly nondissociatively on the stoichiometric SrTiO(3)(100) surface that contains predominately Ti(4+) cations. Desorption of a monolayer methanol from the stoichiometric surface is observed at approximately 250 K, whereas desorption of a multilayer methanol is found to occur at approximately 140 K. Theoretical calculations predict weak adsorption of methanol on TiO(2)-terminated SrTiO(3)(100) surfaces, in agreement with the experimental results. However, the reduced SrTiO(3)(100) surface containing Ti(3+) cations exhibits higher reactivity toward adsorbed methanol, and H(2), CH(4), and CO are the major decomposition products. The surface defects on the reduced SrTiO(3)(100) surface are partially reoxidized upon saturation exposure of CH(3)OH onto this surface at 300 K.

Journal Article↗

PubMed2004

Thermosensitive gold nanoparticles.

Thermosensitive gold nanoparticles were fabricated by conjugating Au with a thiol-terminated poly(N-isopropylacrylamide) or PPA; this polymer stabilizer exhibits a temperature transition while undergoing a hydrophilic to hydrophobic transformation. The introduction of PPA onto gold nanoparticles has sensitized Au nanoparticles with unique temperature dependence. At low temperature (25 degrees C), the solutions containing PPA-functionalized gold nanoparticles are transparent, whereas higher temperatures (30 degrees C) lead to opaque suspensions. The thermosensitive property of PPA-functionalized Au nanoparticles is reversible, and the clear-opaque suspensions can be repeated many times.

Acrylic Resins↗

PubMed2003

Folding versus self-assembling.

Model foldable polymers with sequences of rigid hydrophobic chromophores and flexible hydrophilic tetra(ethylene glycol) were synthesized and used as a paradigm for studying molecular-folding and self-assembly phenomena. Our results demonstrate that intramolecular association or folding prevails over intermolecular interaction or self-assembling in the concentration region from 1 microM to 0.1 M. Importantly, folded polymeric nanostructures have absorption and fluorescence properties that are distinct from those of unfolded polymers or free monomers. We hypothesize that the origins of folding and self-assembly come from interactions between molecular units, and that the key parameter that regulates the on-and-off of such interactions is the distance R separating the two molecular units. Each molecular unit produces a characteristic force field, and when another molecular unit enters this field, the probability that the two units will interact increases significantly. A preliminary estimate of the radius of such a force field for the perylene tetracarboxylic diimide chromophore is about 90-120 A. As a result, phenomena associated with folding or self-assembly of molecular species are observed when these conditions are met in solution.

Ethylene Glycol↗