PubMed Health⌕ Search

Biomedical subjects

Liberato Manna

Publications and source records attributed to Liberato Manna.

15 recordsLinked to original sources
PubMed2007

Semiconductor quantum rods as single molecule fluorescent biological labels.

In this paper, we report the development of rod-shaped semiconductor nanocrystals (quantum rods) as fluorescent biological labels. Water-soluble biocompatible quantum rods have been prepared by surface silanization and applied for nonspecific cell tracking as well as specific cellular targeting. Quantum rods are brighter single molecule probes as compared to quantum dots. They have many potential applications as biological labels in situations where their properties offer advantages over quantum dots.

Fluorescent Dyes↗
PubMed2006

Synthesis, properties and perspectives of hybrid nanocrystal structures.

Current efforts and success of nanoscale science and technology are related to the fabrication of functional materials and devices in which the individual units and their spatial arrangement are engineered down to the nanometer level. One promising way of achieving this goal is by assembling colloidal inorganic nanocrystals as the novel building blocks of matter. This trend has been stimulated by significant advances in the wet-chemical syntheses of robust and easily processable nanocrystals in a wide range of sizes and shapes. The increase in the degree of structural complexity of solution-grown nanostructures appears to be one of the natural directions towards which nanoscience will increasingly orient. Recently, several groups have indeed devised innovative syntheses of nanocrystals through which they have been able to group inorganic materials with different properties in the same particle. These approaches are paving the way to the development of nanosized objects able to perform multiple technological tasks. In this critical review (165 references), we will summarize the recent advances in the synthesis of colloidal nanocrystals, with emphasis on the strategies followed for the fabrication of nano-heterostructures, as well as on their properties and the perspectives in this field.

Journal Article↗
PubMed2006

Electron-hole dynamics in CdTe tetrapods.

We present transient absorption studies with femtosecond time resolution on the electron-hole dynamics in CdTe tetrapod nanostructures. Electron-hole pairs are generated by optical excitation in the visible spectral range, and an immediate bleach and induced absorption signal are observed. The relaxation dynamics to the lowest excitonic state is completed in about 6 ps. Experiments with polarized excitation pulses give information about the localization of the excited-state wave functions. The influence of the nanocrystal shape on the optical properties of CdTe nanoparticles is discussed.

Anisotropy↗
PubMed2006

Heterodimers based on CoPt3-Au nanocrystals with tunable domain size.

We describe an approach to synthesize colloidal nanocrystal heterodimers composed of CoPt(3) and Au. The growth is based on the nucleation of gold domains on preformed CoPt(3) nanocrystals. It is a highly versatile methodology which allows us to tune independently the size of the two domains in each dimer by varying several reaction parameters. The statistical analysis of the distribution of the domain sizes in the dimers and the compositional mapping achieved by dark field imaging and energy dispersive spectroscopy confirm that the two domains in each dimer are indeed made of CoPt(3) and Au, respectively. Structural characterization by high-resolution transmission electron microscopy shows that the two domains, both having cubic fcc Bravais lattice, can share a common {111}, {100}, or {110} facet, depending on the size of the initial CoPt(3) seeds. The magnetization measurements evidence a ferromagnetic CoPt(3) phase with a relatively low anisotropy as a consequence of their disordered crystalline structure, regardless of the presence of a Au tip. We believe that this prototype of nanocrystal dimer, which can be manipulated under air, can find several applications in nanoscience, as the Au section can be exploited as the preferential anchor point for various molecules, while the CoPt(3) domain can be used for magnetic detection.

Journal Article↗
PubMed2006

Multiple wurtzite twinning in CdTe nanocrystals induced by methylphosphonic acid.

Branching in semiconductor nanocrystals, which leads to tetrapods and to more complex architectures, is the subject of intensive investigation. Here we support the model according to which branching in CdTe nanocrystals is driven by the formation of multiple wurtzite twins. This is in contrast to previous models for this material. We found that twinning, as well as anisotropic growth, can be triggered by the presence of suitable molecules, such as for instance methylphosphonic acid. In the case of CdTe nanocrystals, we designed a robust growth scheme in which the variation of a single parameter (the concentration of methylphosphonic acid in solution) leads to the controlled formation of nanocrystals with shapes ranging from spheres to anisotropic structures with varying level of branching, as both twinning and anisotropic growth are progressively favored. We believe that these concepts can be extended to other nanocrystal systems.

Journal Article↗
PubMed2006

Confinement effects on optical phonons in polar tetrapod nanocrystals detected by resonant inelastic light scattering.

We investigated CdTe nanocrystal tetrapods of different sizes by resonant inelastic light scattering at room temperature and under cryogenic conditions. We observe a strongly resonant behavior of the phonon scattering with the excitonic structure of the tetrapods. Under resonant conditions we detect a set of phonon modes that can be understood as confined longitudinal-optical phonons, surface-optical phonons, and transverse-optical phonons in a nanowire picture.

Journal Article↗
PubMed2006

Colloidal synthesis and characterization of tetrapod-shaped magnetic nanocrystals.

Tetrapod-shaped maghemite nanocrystals are synthesized by manipulating the decomposition of iron pentacarbonyl in a ternary surfactant mixture under mild thermal conditions. Adjustment of the reaction parameters allows for the systematic tuning of both the width and the length of the tetrapod arms, which grow preferentially along the 111 easy axis direction. Such degree of control leads to modulation of the magnetic behavior of the nanocrystals, which evolves systematically as their surface magnetization phase and shape anisotropy are progressively increased.

Anisotropy↗
PubMed2005

First-principles modeling of unpassivated and surfactant-passivated bulk facets of wurtzite CdSe: a model system for studying the anisotropic growth of CdSe nanocrystals.

Equilibrium geometries, surface energies, and surfactant binding energies are calculated for selected bulk facets of wurtzite CdSe with a first-principles approach. Passivation of the surface Cd atoms with alkyl phosphonic acids or amines lowers the surface energy of all facets, except for the polar 000 facet. On the nonpolar facets, the most stable configuration corresponds to full coverage of surface Cd atoms with surfactants, while on the polar 0001 facet it corresponds only to a partial coverage. In addition, the passivated surface energies of the nonpolar facets are in general lower than the passivated polar 0001 facet. Therefore, the polar facets are less stable and less efficiently passivated than the nonpolar facets, and this can rationalize the observed anisotropic growth mechanism of wurtzite nanocrystals in the presence of suitable surfactants.

Journal Article↗
PubMed2005

Selective growth of PbSe on one or both tips of colloidal semiconductor nanorods.

PbSe nanocrystals with rock-salt structure are grown on the tips of colloidal CdS and CdSe nanorods. The facets of wurtzite rods provide a substrate with various degrees of reactivity for the growth of PbSe. The presence of dangling Cd bonds may explain subtle differences between nonequivalent facets resulting in the selective nucleation of PbSe only on one of the two tips of each CdS rod. This approach has the potential to facilitate the fabrication of heterostructures with tailored optical and electronic properties.

Adsorption↗
PubMed2004

Colloidal nanocrystal heterostructures with linear and branched topology.

The development of colloidal quantum dots has led to practical applications of quantum confinement, such as in solution-processed solar cells, lasers and as biological labels. Further scientific and technological advances should be achievable if these colloidal quantum systems could be electronically coupled in a general way. For example, this was the case when it became possible to couple solid-state embedded quantum dots into quantum dot molecules. Similarly, the preparation of nanowires with linear alternating compositions--another form of coupled quantum dots--has led to the rapid development of single-nanowire light-emitting diodes and single-electron transistors. Current strategies to connect colloidal quantum dots use organic coupling agents, which suffer from limited control over coupling parameters and over the geometry and complexity of assemblies. Here we demonstrate a general approach for fabricating inorganically coupled colloidal quantum dots and rods, connected epitaxially at branched and linear junctions within single nanocrystals. We achieve control over branching and composition throughout the growth of nanocrystal heterostructures to independently tune the properties of each component and the nature of their interactions. Distinct dots and rods are coupled through potential barriers of tuneable height and width, and arranged in three-dimensional space at well-defined angles and distances. Such control allows investigation of potential applications ranging from quantum information processing to artificial photosynthesis.

Journal Article↗
PubMed2003

Shape control and applications of nanocrystals.

Inorganic nanocrystals with well-defined shapes are important for understanding basic size-dependent scaling laws, and may be useful in a wide range of applications. Methods for controlling the shapes of inorganic nanocrystals are evolving rapidly. This paper will focus on how we currently control the shape of nanocrystals and this will be illustrated using CdSe and Co nanocrystals as examples for semiconductors and for metals. These materials show a more pronounced variation of fundamental properties with aspect ratio. However, to take advantage of these shape-dependent properties in possible applications, several challenges need to be overcome. Issues such as alignment, high quantum yield and photostability and precise control of three-dimensional structures need to be addressed. These challenges, as well as several potential applications, will be described briefly.

Journal Article↗
PubMed2003

Controlled growth of tetrapod-branched inorganic nanocrystals.

Nanoscale materials are currently being exploited as active components in a wide range of technological applications in various fields, such as composite materials, chemical sensing, biomedicine, optoelectronics and nanoelectronics. Colloidal nanocrystals are promising candidates in these fields, due to their ease of fabrication and processibility. Even more applications and new functional materials might emerge if nanocrystals could be synthesized in shapes of higher complexity than the ones produced by current methods (spheres, rods, discs). Here, we demonstrate that polytypism, or the existence of two or more crystal structures in different domains of the same crystal, coupled with the manipulation of surface energy at the nanoscale, can be exploited to produce branched inorganic nanostructures controllably. For the case of CdTe, we designed a high yield, reproducible synthesis of soluble, tetrapod-shaped nanocrystals through which we can independently control the width and length of the four arms.

Cadmium Compounds↗
PubMed2002

Epitaxial growth and photochemical annealing of graded CdS/ZnS shells on colloidal CdSe nanorods.

We report the preparation and structural characterization of core/shell CdSe/CdS/ZnS nanorods. A graded shell of larger band gap is grown around CdSe rods using trioctylphosphine oxide as a surfactant. Interfacial segregation is used to preferentially deposit CdS near the core, providing relaxation of the strain at the core/shell interface. The reported synthesis allows for variation of the shell thickness between one and six monolayers, on core nanorods ranging from aspect ratios of 2:1 to 10:1. After an irreversible photochemical annealing process, the core/shell nanorods have increased quantum efficiencies and are stable in air under visible or UV excitation. In addition to their robust optical properties, these samples provide an opportunity for the study of the evolution of epitaxial strain as the shape of the core varies from nearly spherical to nearly cylindrical.

Journal Article↗