PubMed Health⌕ Search

Biomedical subjects

Limin Sun

Publications and source records attributed to Limin Sun.

9 recordsLinked to original sources

Effects of incorporating nanosized calcium phosphate particles on properties of whisker-reinforced dental composites.

Clinical data indicate that secondary caries and restoration fracture are the most common problems facing tooth restorations. Our ultimate goal was to develop mechanically-strong and caries-inhibiting dental composites. The specific goal of this pilot study was to understand the relationships between composite properties and the ratio of reinforcement filler/releasing filler. Nanoparticles of monocalcium phosphate monohydrate (MCPM) were synthesized and incorporated into a dental resin for the first time. Silicon carbide whiskers were fused with silica nanoparticles and mixed with the MCPM particles at MCPM/whisker mass ratios of 1:0, 2:1, 1:1, 1:2, and 0:1. The composites were immersed for 1-56 days to measure Ca and PO4 release. When the MCPM/whisker ratio was changed from 0:1 to 1:2, the composite flexural strength (mean +/- SD; n = 5) decreased from 174 +/- 26 MPa to 138 +/- 9 MPa (p < 0.05). A commercial nonreleasing composite had a strength of 112 +/- 14 MPa. When the MCPM/whisker ratio was changed from 1:2 to 1:1, the Ca concentration at 56 days increased from 0.77 +/- 0.04 mmol/L to 1.74 +/- 0.06 mmol/L (p < 0.05). The corresponding PO4 concentration increased from 3.88 +/- 0.21 mmol/L to 9.95 +/- 0.69 mmol/L (p < 0.05). Relationships were established between the amount of release and the MCPM volume fraction v(MCPM) in the resin: [Ca]= 42.9 v(MCPM) (2.7), and [PO4] = 48.7 v(MCPM) (1.4). In summary, the method of combining nanosized releasing fillers with reinforcing fillers yielded Ca- and PO4-releasing composites with mechanical properties matching or exceeding a commercial stress-bearing, nonreleasing composite. This method may be applicable to the use of other Ca-PO4 fillers in developing composites with high stress-bearing and caries-preventing capabilities, a combination not yet available in any dental materials.

Calcium Phosphates↗

Extracellular matrix-mediated membrane-type 1 matrix metalloproteinase expression in pancreatic ductal cells is regulated by transforming growth factor-beta1.

Pancreatic ductal adenocarcinoma (PDAC) is associated with an intense fibrotic reaction around the tumor known as desmoplastic reaction. This tissue is composed of interstitial matrix, predominantly type I collagen, together with proliferating fibroblastic cells. Despite the recognized importance of tumor-stromal interactions, very little is known about the interactions among pancreatic cells, myofibroblasts, and the interstitial matrix. The current study was undertaken to test the hypothesis that the desmoplastic reaction alters PDAC gene expression and cellular behavior. Evaluation of human pancreatic specimens showed increased fibrosis and enhanced membrane type 1-matrix metalloproteinase (MT1-MMP) expression in tumor specimens compared with normal pancreas. Using an in vitro model of tumor cell-stromal interactions, type I collagen and the extracellular matrix deposited by pancreatic fibroblasts and PDAC cells regulated motility of human papillomavirus-immortalized human pancreatic ductal epithelial (HPDE) cells. These "stromal" matrices also regulated MT1-MMP expression by HPDE cells, without affecting the expression of tissue inhibitor of metalloproteinase 2. Treatment with transforming growth factor-beta1 (TGF-beta1) type I receptor kinase inhibitors and function-blocking anti-TGF-beta1 antibody abrogated matrix-mediated MT1-MMP induction. TGF-beta1 also promoted MT1-MMP-dependent migration by HPDE cells. Moreover, compared with normal tissue, there was increased TGF-beta1 signaling in grade 3 tumor specimens as shown by increased phospho-Smad2 staining. These data show that the crosstalk between cancer cells and stromal elements mediated by TGF-beta1 influences cell surface- and pericellular matrix-degrading potential in vitro and may contribute to pancreatic cancer progression in vivo.

Carcinoma, Pancreatic Ductal↗

Chronic PKC-beta activation in HT-29 Cl.19a colonocytes prevents cAMP-mediated ion secretion by inhibiting apical membrane current generation.

We investigated the effects of PKC-stimulating 12-deoxyphorbol 13-phenylacetate 20-acetate (DOPPA) and phorbol 12-myristate 13-acetate (PMA) phorbol esters on cAMP-dependent, forskolin (FSK)-stimulated, short-circuit Cl- current (ISC-cAMP) generation by colonocyte monolayers. These agonists elicited different actions depending on their dose and incubation time; PMA effects at the onset (<5 min) were independent of cAMP agonist and were characterized by transient anion-dependent transcellular and apical membrane ISC generation. DOPPA failed to elicit similar responses. Whereas chronic (24 h) exposure to both agents inhibited FSK-stimulated transcellular and apical membrane ISC-cAMP, the effects of DOPPA were more complex: this conventional PKC-beta-specific agonist also stimulated Ba2+-sensitive basolateral membrane-dependent facilitation of transcellular ISC-cAMP. PMA did not elicit a similar phenomenon. Prolonged exposure to high-dose PMA but not DOPPA led to apical membrane ISC-cAMP recovery. Changes in PKC alpha-, beta1-, gamma-, and epsilon-isoform membrane partitioning and expression correlated with these findings. PMA-induced transcellular ISC correlated with PKC-alpha membrane association, whereas low doses of both agents inhibited transcellular and apical membrane ISC-cAMP, increased PKC-beta1, decreased PKC-beta2 membrane association, and caused reciprocal changes in isoform mass. During the apical membrane ISC-cAMP recovery after prolonged high-dose PMA exposure, an almost-complete depletion of cellular PKC-beta1 and a significant reduction in PKC-epsilon mass occurred. Thus activated PKC-beta1 and/or PKC-epsilon prevented, whereas activated PKC-alpha facilitated, apical membrane ISC-cAMP. PKC-beta-dependent augmentation of transcellular ISC-cAMP at the level of the basolateral membrane demonstrated that transport events with geographically distinct subcellular membranes can be independently regulated by the PKC beta-isoform.

Colon↗

Chronic PKC-beta2 activation in HT-29 Cl.19a colonocytes prevents cAMP-mediated ion secretion by inhibiting apical membrane CFTR targeting.

We investigated the effects of chronically applied PKC-stimulating phorbol esters on subcellular CFTR expression and localization in polarized HT-29 Cl.19A monolayers. Modulation of PKC activity with the PKC-beta-specific agonist 12-deoxyphorbol 13-phenylacetate 20-acetate (DOPPA) or nonisoform-selective PMA altered monolayer CFTR immunofluorescence. A decrease in the CFTR signal within the luminal cellular pole was noted with both phorbol esters. Volumetric analysis of the intracellular CFTR signal revealed that both compounds promoted CFTR accumulation into punctate vesicle-like structures found adjacent to the cellular tight junction [labeled with zona occludens (ZO)-1 antibody], extending basally (DOPPA) into the cell. Puncta were more frequent with DOPPA and larger in size with PMA. DOPPA also promoted ZO-1 accumulation at tricellular corners associated with enhanced CFTR puncta number. The observed loss of CFTR immunofluorescence signal induced by low-dose PMA was related to CFTR sequestration into fewer cytoplasmic puncta and correlated with larger increases in PKC substrate phosphorylation. Both phorbol esters downregulated steady-state cellular CFTR mRNA levels by 70%. However, the effects of DOPPA and PMA were largely independent of CFTR biosynthesis: expression levels were 80-85% of control, and the glycosylation status of immunoprecipitated protein remained largely unchanged. Thus changes in cellular CFTR localization correlated with our companion study showing that PMA-induced inhibition of transcellular cAMP-dependent short-circuit current (ISC) was accompanied by cytoplasmic PKC-beta2 accumulation and modest activation of PKC-beta1 and PKC-epsilon. The inhibitory effect of DOPPA on ISC was related solely to increased cytoplasmic PKC-beta2 levels. Thus PKC-beta2 is hypothesized to participate in the regulation of CFTR apical plasma membrane targeting within the constitutive cellular biosynthetic pathway.

Colon↗

Fast setting calcium phosphate cement-chitosan composite: mechanical properties and dissolution rates.

Calcium phosphate cement (CPC) can self-harden in vivo to form hydroxyapatite (HA) with excellent osteoconductivity. In recent studies, CPC-chitosan composites are developed with high mechanical strength and washout resistance. The objectives of the present study are to optimize the setting time and mechanical properties of a CPC-chitosan composite by tailoring the chitosan content, and to evaluate the bioresorbability by using an in vitro dissolution model. Six chitosan mass fractions are tested: 0, 10, 15, 20, 25, and 30%. Specimens are immersed in solutions with pH ranging from 3.5 to 5 to simulate the acidic environments produced by osteoclasts in vivo. Dissolution is measured as the fraction of mass loss versus immersion time from 7d to 28d. The CPC-chitosan composite with 20% by mass chitosan has a setting time (mean+/-SD; n=4) of 13 1 min, significantly less than 87 7 min for CPC control without chitosan (p<0.05). The composite flexural strength (mean+/-SD; n 1/4 6) was 14 2 MPa, significantly higher than 4 1 MPa of CPC control (p<0.05). At an intermediate pH of 4.5, the fraction of mass loss for CPC with 20% chitosan and CPC control without chitosan are not significantly different (p>0.1). The dissolution rates (fraction of mass loss per day,%/d) were 1.05 for CPC control and 1.08 for CPC-chitosan. In summary, a CPC-chitosan composite is developed with fast-setting and a flexural strength three-fold of that of CPC control without chitosan. Both materials are soluble in acidic environments, indicating that adding chitosan did not compromise the bioresorbability of CPC. The strong and resorbable CPC-chitosan composite may be useful in moderate stress-bearing craniofacial and orthopedic repairs.

Bone Cements↗

Development of a nonrigid, durable calcium phosphate cement for use in periodontal bone repair.

BACKGROUND: Calcium phosphate cement (CPC) hardens in situ to form hydroxyapatite and has been used in dental and craniofacial restorative applications. However, when CPC was used in periodontal osseous repair, tooth mobility resulted in the fracture and exfoliation of the brittle CPC implant. The objective of the authors' study was to develop a strong and nonrigid CPC to provide compliance for tooth mobility without fracturing the implant. METHODS: The authors used tetracalcium phosphate, dicalcium phosphate anhydrous and biopolymer chitosan to develop a strong and nonrigid CPC. They used a powder:liquid ratio of 2:1, compared with the 1:1 ratio of a previously developed nonrigid CPC control. Specimens were characterized using a flexural test, scanning electron microscopy and powder X-ray diffraction. RESULTS: After 28 days of immersion, the new cement had a flexural strength (mean +/- standard deviation; n = 6) of 5.2 +/- 1.0 megapascals, higher than 1.8 +/- 1.5 MPa for the control (P < .05) and overlapping the reported strengths of sintered hydroxyapatite implants and cancellous bone. This cement showed a high ductility with a strain at peak load of 6.5 +/- 1.3 percent, compared with 4.4 +/- 1.9 percent for the control; both were 20-fold higher than the 0.2 percent of the conventional CPC. Nanosized hydroxyapatite crystals, similar to those in teeth and bones, were formed in the cements. CONCLUSIONS: The new nonrigid cement, containing nanohydroxyapatite crystals, possessed a high ductility and superior fracture resistance. This strong, tough and nonrigid CPC may be useful in periodontal repair to provide compliance for tooth mobility without fracture. CLINICAL IMPLICATIONS: The results of this study may yield the first self-hardening and nonrigid hydroxyapatite composite with high strength and durability and large deformation capability to be useful in the regeneration of periodontal osseous defects.

Alveolar Bone Loss↗

[Adaptability of Litopenaeus vannamei to saline-alkali water in west Jilin Province].

By supplementing natural saline-alkali water into desalinated prawn-cultivating pond, this paper studied the survival ability of Litopenaeus vannamei under saline-alkali water environment. The results showed that the survival duration of untamed juvenile shrimp was more than 96 hours at the alkalinity of saline-alkali water from 5.15 to 19.24 mmol x L(-1), and less than 0.75 hours at the alkalinity from 23.41 to 38.78 mmol x L(-1). The survival duration of tamed juvenile shrimp was more than 24 hours at the alkalinity from 5.15 to 38.78 mmol x L(-1). The upper limit of alkalinity adapted by untamed juvenile shrimp was about 10 mmol x L(-1), and the adaptability to the increasing disparity in alkalinity was under 8 mmol x L(-1). The adaptability of juvenile shrimp could be increased by the increase of tamed standard, and that of tamed juvenile shrimp to the alkalinity of 30 mmol x L(-1) was from 2 to 4 mmol x L(-1) and from 3 to 25 mmol x L(-1) for the alkalinity disparity increase and decrease, respectively. Litopenaeus vannamei could be cultivated in the saline-alkali water with an alkalinity of 32 mmol x L(-1) in west Jilin Province.

Adaptation, Psychological↗

Surface characteristics and dissolution behavior of plasma-sprayed hydroxyapatite coating.

One of the most important concerns with the clinical use of plasma-sprayed hydroxyapatite (HA) coatings is the resorption of the coating, and dissolution at neutral pH is one of the two major resorption mechanisms. In this study, highly crystalline pure HA powders were atmospherically plasma sprayed using various parameters. Dissolution of both HA powders and coatings was measured using a calcium ion meter. Surface characteristics, including phase, morphology, and roughness, were compared for the coatings before and after dissolution. Pulverized HA coatings exhibited significantly higher dissolution compared with the same quantity of feedstock HA powders because of the decreased crystallinity and fine crystal size of the coating. Furthermore, the dissolution decreased with the crystallinity of the coating. Dissolution of HA coatings did not show much difference with respect to the coatings in the initial stage of immersion (4 h). However, dissolution of all coatings reached saturation in a fresh physiological solution. The saturation values were much lower compared with their counterparts in the form of powders, which may imply the stability of HA coatings in long-term use. In addition to crystallinity, the particle melting status in the coatings, i.e., the volume of nanocrystals, and porosity, was found to be another important factor for the dissolution of the HA coating. X-ray diffraction patterns of HA coatings indicated the complete dissolution of impurity phases and amorphous phase after the coatings were immersed in the solution for 4 days. Coatings sprayed at lower power (27.5 kW) exhibited a pattern of crystalline HA whereas coatings sprayed at higher power (42 kW) exhibited a pattern of bone apatite. Surface morphologies showed preferential dissolution of amorphous phase in all coatings accompanied with precipitation of bone apatite observable for coatings sprayed at higher power. Surface roughness measured after the dissolution studies increased for the two coatings sprayed at lower power level but decreased for coatings sprayed at higher power level. This decrease is attributed to the better match in solubility characteristics between the fine crystals and the amorphous calcium phosphate within the coating.

Algorithms↗

[Role of high resolution CT in diffuse pulmonary nodules].

OBJECTIVE: To evaluate high resolution CT (HRCT) in the diagnosis of diffuse pulmonary nodules. METHODS: Fifty normal chest radiographs, conventional CT and HRCT were used to evaluate the visualization of pulmonary lobule. The configuration, distribution and intrinsic structure of lesion in 38 patients with diffuse pulmonary nodules were analyzed by HRCT. RESULTS: The chest radiographs were not able to show the structure of pulmonary lobule. The visualization rates of pulmonary lobule were 20% by conventional CT and 50% by HRCT (P < 0.05). Of 38 patients with diffuse pulmonary nodules, 19 had interstitial nodules which were located in the pulmonary intestities, the lobular septa and under the pleura. HRCT could clearly show their para-bronchial distribution with clear cut margin. Four had airspace nodules, chiefly shown as solidification of the air spaces. There was no nodule beneath the pleura or in the lobular septa. HRCT revealed even density and hazzy margins. Fifteen had randomly distributed nodules, with the nodules scattered at random. HRCT showed nodules with high density, sizes varying greatly but the margin was clear. CONCLUSION: High resolution CT is able to show the pattern of distribution, intranodular structures and background of the diffuse pulmonary nodules, which is valuable in the diagnosis and differential diagnosis of this disease.

Adult↗