Biomedical subjects

Linda A Brouwer

Publications and source records attributed to Linda A Brouwer.

7 recordsLinked to original sources

PubMed2006

Chemical and biological properties of supramolecular polymer systems based on oligocaprolactones.

We show that materials with a diverse range of mechanical and biological properties can be obtained using a modular approach by simply mixing different ratios of oligocaprolactones that are either end-functionalized or chain-extended with quadruple hydrogen bonding ureido-pyrimidinone (UPy) moieties. The use of two UPy-synthons allows for easy synthesis of UPy-modified polymers resulting in high yields. Comparison of end-functionalized UPy-polymers with chain-extended UPy-polymers shows that these polymers behave distinctively different regarding their material and biological properties. The end-modified UPy-polymer is rather stiff and brittle due to its high crystallinity. Disks made of this material fractures after subcutaneous implantation. The material shows a low inflammatory response which is accompanied by the formation of a fibrous capsule, reflecting the inertness of the material. The chain-extended UPy-material on the contrary is practically free of crystalline domains and shows clear flexible properties. This material deforms after in-vivo implantation, accompanied with cellular infiltration. By mixing both polymers, materials with intermediate properties concerning their mechanical and biological behaviour can be obtained. Surprisingly, a 20:80 mixture of both polymers with the chain-extended UPy-polymer in excess shows flexible properties without visible deformation upon implantation for 42 days. This mixture, a blend formed by intimate mixing through UPy-UPy interaction, also shows a mild tissue response accompanied with the formation of a thin capsule. The material does not become more crystalline upon implantation. Hence, this mixture might be an ideal scaffold material for soft tissue engineering due to its flexibility and diminished fibrous tissue formation, and illustrates the strength of the modular approach.

Animals↗

PubMed2006

Circulating CD34+ progenitor cells modulate host angiogenesis and inflammation in vivo.

Within the phenotypically and functionally heterogeneous group of circulating progenitor cells (CPC), a subclass of cells with vascular repair potential have been identified. These CPC are detected and isolated based on single or combined expression of CD34, CD133 and VEGFR-2, and referred to as endothelial progenitor cells. Here we asked whether CPC subsets defined by single expression of these markers exhibit functional heterogeneity. As functional parameters, we chose the capacity of CPC to differentiate into endothelial cells. Moreover, we studied their role in remodeling by recruitment of inflammatory cells, an aspect that has been little explored. We established an in vivo model in which the intrinsic functional capacity of these human CPC subsets was studied. Human CD34+ CPC, but not CD133+ or VEGFR-2+ CPC, seeded in Matrigel pellets and transplanted subcutaneously in a nude mouse host, contributed little to donor-derived neovascularization. However, host angiogenesis in the Matrigel implant, as demonstrated by the presence of capillaries containing erythrocytes and expressing mouse CD31, was strong in response to implantation of human CD34+ CPC and significantly lower in response to the other two CPC subsets. Moreover, the CD34+ CPC subset was significantly superior to CD133+ CPC and VEGFR-2+ CPC in the recruitment of host monocytes/macrophages. These three CPC populations were further dissected into seven discrete subsets, based on three-parameter flow cytometry analysis of combined expression patterns of CD34, CD133 and VEGFR-2. In conclusion, in our system, CD34+ CPC contribute marginally to neovascularization by differentiation but are potent regulators of the host angiogenic and pro-inflammatory response, suggesting a possible role for these cells in the remodeling of vascular lesions.

AC133 Antigen↗

PubMed2006

Biocompatibility and degradation of aliphatic segmented poly(ester amide)s: in vitro and in vivo evaluation.

Aliphatic segmented poly(ester amide)s, comprising a crystallizable amide phase and a flexible amorphous ester phase, were investigated for potential use in biomedical applications. By varying the amide content and the type of crystallizable amide segments, the polymer's thermal and mechanical properties can readily be tuned. Polymers with 25 and 50 mol % of amide content are noncytotoxic and sustain growth of fibroblasts onto polymer films. The in vitro degradation of these polymers was followed in PBS (pH 7.4) at 37 degrees C up to 7 months. The poly(ester amide)s showed the characteristics of bulk degradation with a gradual decrease in molecular weight and almost no mass loss. The in vivo degradation of these polymers, followed by subcutaneous implantation in rats up to 6 weeks, was slow and similar to the in vitro degradation. The tissue response upon implantation was followed over 6 weeks. A mild foreign-body reaction, characterized by the presence of macrophages, and sporadically a lymphocyte, were observed in the first week of implantation. After 6 weeks the implant site is characterized by fibrous encapsulation with no signs of inflammation. The poly(ester amide)s tested are biocompatible, but their in vitro as well as in vivo degradation is very slow.

Amides↗

PubMed2006

Molecular recognition in poly(epsilon-caprolactone)-based thermoplastic elastomers.

The molecular recognition properties of the hydrogen bonding segments in biodegradable thermoplastic elastomers were explored, aiming at the further functionalization of these potentially interesting biomaterials. A poly(epsilon-caprolactone)-based poly(urea) 2 was synthesized and characterized in terms of mechanical properties, processibility and histocompatibility. Comparison of the data with those obtained from the structurally related poly(urethane urea) 1 revealed that the difference in hard segment structure does not significantly affect the potency for application as a biomaterial. Nevertheless, the small differences in hard block composition had a strong effect on the molecular recognition properties of the hydrogen bonding segments. High selectivity was found for poly(urea) 2 in which bisureidobutylene-functionalized azobenzene dye 3 was selectively incorporated while bisureidopentylene-functionalized azobenzene dye 4 was completely released. In contrast, the incorporation of both dyes in poly(urethane urea) 1 led in both cases to their gradual release in time. Thermal analysis of the polymers in combination with variable temperature infrared experiments indicated that the hard blocks in 1 showed a sharp melting point, whereas those in 2 showed a very broad melting trajectory. This suggests a more precise organization of the hydrogen bonding segments in the hard blocks of poly(urea) 2 compared to poly(urethane urea) 1 and explains the results from the molecular recognition experiments. Preliminary results revealed that a bisureidobutylene-functionalized GRGDS peptide showed more supramolecular interaction with the PCL-based poly(urea), containing the bisureidobutylene recognition unit, as compared to HMW PCL, lacking this recognition unit.

3T3 Cells↗

PubMed2005

A modular and supramolecular approach to bioactive scaffolds for tissue engineering.

Bioactive polymeric scaffolds are a prerequisite for the ultimate formation of functional tissues. Here, we show that supramolecular polymers based on quadruple hydrogen bonding ureido-pyrimidinone (UPy) moieties are eminently suitable for producing such bioactive materials owing to their low-temperature processability, favourable degradation and biocompatible behaviour. Particularly, the reversible nature of the hydrogen bonds allows for a modular approach to gaining control over cellular behaviour and activity both in vitro and in vivo. Bioactive materials are obtained by simply mixing UPy-functionalized polymers with UPy-modified biomolecules. Low-molecular-weight bis-UPy-oligocaprolactones with cell adhesion promoting UPy-Gly-Arg-Gly-Asp-Ser (UPy-GRGDS) and the synergistic UPy-Pro-His-Ser-Arg-Asn (UPy-PHSRN) peptide sequences are synthesized and studied. The in vitro results indicate strong and specific cell binding of fibroblasts to the UPy-functionalized bioactive materials containing both UPy-peptides. An even more striking effect is seen in vivo where the formation of single giant cells at the interface between bioactive material and tissue is triggered.

3T3 Cells↗

PubMed2005

Tissue reactions of in situ formed dextran hydrogels crosslinked by stereocomplex formation after subcutaneous implantation in rats.

In this study, the in vivo biocompatibility of physically crosslinked dextran hydrogels was investigated. These hydrogels were obtained by mixing aqueous solutions of dextran grafted with L-lactic acid oligomers and dextran grafted with D-lactic acid oligomers. Gelation occurs due to stereocomplex formation of the lactic acid oligomers of opposite chirality. Since gelation takes some time, in situ gel formation is possible with this system. A number of sterilization methods was evaluated for their effect on the chemical and physical properties of the hydrogel. It was shown that of the investigated options (filtration, gamma irradiation, dry-heat and autoclaving) dry-heat sterilization was the preferred method to prepare sterile gels suitable for in vivo evaluations. Two types of stereocomplex gels were prepared and implanted subcutaneously in rats. The tissue reaction was evaluated over a period of 30 days. A mild ongoing foreign body reaction was observed characterized by infiltration of macrophages. Giant cells were only scarcely formed and the low numbers of lymphocytes showed that priming of the immune system is hardly involved. Importantly, the gels fully degraded in vivo within 15 days, which is in good agreement with the in vitro degradation behaviour of these gels. In conclusion, stereocomplexed dextran-oligolactic gels showed good biocompatibility which makes them suitable candidates for the design of controlled release devices for pharmaceutically active proteins.

Absorbable Implants↗

PubMed2004

Ongoing foreign body reaction to subcutaneous implanted (heparin) modified Dacron in rats.

Dacron-containing heart valve repair devices trigger chronic inflammation characterized by the presence of activated macrophages, foreign body giant cells, and capsule formation. Upon blood contact, proinflammatory proteins adsorb to the material and provide a substrate for monocyte binding and differentiation. Various heparin-coated polymers have been shown to reduce adsorption of proinflammatory proteins in vitro and in vivo. In this study, the effect of knitted, heparin-coated Dacron on the foreign body reaction was tested subcutaneously in rats. We hypothesized that the anti-inflammatory effect of heparin would reduce monocyte recruitment and differentiation and therefore limit the inflammatory reaction. An ongoing foreign body reaction, characterized by the presence of foreign body giant cells and high vascularization, was observed in uncoated as well as (heparin-)coated Dacron at up to 180 days of implantation. Also, a thin capsule was formed around each material up to this time. In conclusion, although heparin coatings might have an effect on the acute inflammatory response, we were not able to show a difference between heparin-coated and uncoated Dacron after 180 days' implantation in rats. Further research needs to be conducted to assess the difference in proinflammatory protein adsorption between the tested materials and the effect this has on the long-term foreign body reaction.

Adsorption↗