PubMed Health⌕ Search

Biomedical subjects

Linda G Griffith

Publications and source records attributed to Linda G Griffith.

18 recordsLinked to original sources
PubMed2026

Live-cell transcriptomics with engineered virus-like particles.

Transcriptomic profiling is widely applied to characterize cellular gene expression, yet existing approaches lyse cells and preclude direct analysis of transcriptional dynamics in the same sample over time. We addressed this limitation by engineering mammalian cells to "self-report" their transcriptional states via mRNA export in virus-like particles (VLPs). Repeated sampling of culture media from VLP-producing cell populations faithfully captured evolving transcriptional states in complex biological settings, including acute inflammatory stimulation of primary cell spheroids and multi-day differentiation of pluripotent stem cells. We engineered VLP components for multiplexed readouts from distinct cell types in co-culture and for tuning self-reported RNA profiles. Finally, we demonstrated the unique utility of self-reporting for selective longitudinal tracking of endothelial cell dynamics within the enclosed architecture of a microphysiological co-culture system to identify perivascular stroma-dependent temporal gene programs underlying vasculogenesis. Altogether, this work establishes cellular self-reporting as a broadly enabling technology for live-cell transcriptome-wide gene expression profiling.

RNA↗
PubMed2007

Formation of osteogenic colonies on well-defined adhesion peptides by freshly isolated human marrow cells.

Bone graft performance can be enhanced by addition of connective tissue progenitors (CTPs) from fresh bone marrow in a manner that concentrates the CTP cell population within the graft. Here, we used small peptide adhesion ligands presented against an otherwise adhesion-resistant synthetic polymer background in order to illuminate the molecular basis for the attachment and colony formation by osteogenic CTPs from fresh human marrow, and contrast the behavior of fresh marrow to many commonly used osteogenic cell sources. The linear GRGDSPY ligand was as effective as tissue culture polystyrene in fostering attachment of culture-expanded porcine CTPs. Although this GRGDSPY peptide was more effective than control peptides in fostering alkaline phosphatase (AP)-positive colony formation from primary human marrow in 5 of the 7 patients tested, GRGDSPY was as effective as the control glass substrate in only one patient of 7. Thus, the peptide appears capable of enabling osteoblastic development from only a subpopulation of CTPs in marrow. The bone sialoprotein-derived peptide FHRRIKA was ineffective in fostering attachment of primary culture-expanded pig CTPs, although it was as effective as GRGDSPY in fostering AP-positive colonies from fresh human marrow. This study provides insights into integrin-mediated behaviors of CTPs and highlights differences between freshly isolated marrow and culture-expanded cells.

Bone Marrow Cells↗
PubMed2006

Adenoviral vector saturates Akt pro-survival signaling and blocks insulin-mediated rescue of tumor necrosis-factor-induced apoptosis.

Recombinant adenoviruses are used extensively as delivery vectors in clinical gene therapy and in molecular biology, but little is known about how the viral carrier itself contributes to cellular responses. Here we show that infection with an E1/E3-deleted adenoviral vector (Adv) sensitizes human epithelial cells to tumor necrosis factor (TNF)-induced apoptosis. To explore the mechanism of Adv-mediated sensitization, we measured activity time courses for three protein kinases (MK2, IKK and JNK1) centrally involved in the TNF-receptor signaling network, as well as two kinases (Akt and ERK) activated by growth factors. Both the pro-apoptotic signal MK2 and the anti-apoptotic signal Akt were upregulated when Adv-infected cells were stimulated with TNF, and MK2 and Akt each contributed significantly to TNF-induced cell fate. Surprisingly, further activation of Akt in Adv-infected cells via insulin treatment did not significantly reduce apoptosis or MK2 activity. We show that the ineffectiveness of insulin-mediated anti-apoptotic signaling through Akt is due to saturation of Akt-effector substrate phosphorylation in Adv-infected cells. Normalizing Akt signaling relative to its Adv-induced baseline activity identified a global dose-response curve that relates Akt signaling to cellular survival. Thus, the background Akt activity induced by Adv limits the transmission of anti-apoptotic signals in response to further cytokine or growth-factor stimulation. The phenotypic and intracellular synergy between Adv and TNF may have implications for interpreting cellular responses in gene-therapy and laboratory applications.

Adenoviridae↗
PubMed2006

Capturing complex 3D tissue physiology in vitro.

The emergence of tissue engineering raises new possibilities for the study of complex physiological and pathophysiological processes in vitro. Many tools are now available to create 3D tissue models in vitro, but the blueprints for what to make have been slower to arrive. We discuss here some of the 'design principles' for recreating the interwoven set of biochemical and mechanical cues in the cellular microenvironment, and the methods for implementing them. We emphasize applications that involve epithelial tissues for which 3D models could explain mechanisms of disease or aid in drug development.

Animals↗
PubMed2005

Epidermal growth factor as a candidate for ex vivo expansion of bone marrow-derived mesenchymal stem cells.

Bone marrow mesenchymal stem cells (BMMSCs) are pluripotent cells capable of differentiating into several cell types and are thus an attractive cell source for connective tissue engineering. A challenge in such a use is expansion and directed seeding in vitro, requiring proliferation and survival, and directed migration, respectively, prior to functional differentiation. The epidermal growth factor (EGF) receptor (EGFR) is the prototypal growth factor receptor and elicits these responses from a wide variety of stromal, epithelial, and endothelial cells. Ligands for this receptor are appealing for use in tissue engineering because they are relatively resistant to biological extremes and amenable to high-volume production. Therefore, we determined whether an EGFR ligand, EGF, could be used for ex vivo expansion of BMMSCs. EGF stimulated motility in rat and immortalized human BMMSCs. EGF-induced proliferation was observed in immortalized human BMMSCs but was not apparent in rat BMMSCs under our experimental conditions. EGF did not, however, rescue either type of BMMSC from apoptosis due to lack of serum. During our examination of key signaling intermediaries, EGF caused robust phosphorylation of extracellular signal-regulated protein kinase (ERK) and protein kinase B/akt (AKT) but only minimal phosphorylation of EGFR and phospholipase C-gamma in rat BMMSCs, whereas in the human BMMSCs these intermediaries were all strongly activated. EGF also induced robust ERK activation in primary porcine mesenchymal stem cells. EGF pretreatment or cotreatment did not interfere with secondarily induced differentiation of either type of BMMSC into adipogenic or osteogenic lineages. Platelet-derived growth factor (PDGF) effects were similar to but not additive with those elicited by EGF, with some quantitative differences; however, PDGF did interfere with the differentiation of these BMMSCs. These findings suggest that EGFR ligands could be used for ex vivo expansion and direction of BMMSCs.

Animals↗
PubMed2004

Microfluidic shear devices for quantitative analysis of cell adhesion.

We describe the design, construction, and characterization of microfluidic devices for studying cell adhesion and cell mechanics. The method offers multiple advantages over previous approaches, including a wide range of distractive forces, high-throughput performance, simplicity in experimental setup and control, and potential for integration with other microanalytic modules. By manipulating the geometry and surface chemistry of the microdevices, we are able to vary the shear force and the biochemistry during an experiment. The dynamics of cell detachment under different conditions can be captured simultaneously using time-lapse videomicroscopy. We demonstrate assessment of cell adhesion to fibronectin-coated substrates as a function of the shear stress or fibronectin concentration in microchannels. Furthermore, a combined perfusion-shear device is designed to maintain cell viability for long-term culture as well as to introduce exogenous reagents for biochemical studies of cell adhesion regulation. In agreement with established literature, we show that fibroblasts cultured in the combined device reduced their adhesion strength to the substrate in response to epidermal growth factor stimulation.

3T3 Cells↗
PubMed2004

Osteoblast response to PLGA tissue engineering scaffolds with PEO modified surface chemistries and demonstration of patterned cell response.

Because tissues are characterized by a well-defined three-dimensional arrangement of cells, tissue engineering scaffolds that facilitate the organization and differentiation of new tissue will have improved performance in comparison to scaffolds that only provide surfaces for cell attachment and growth. We hypothesize that instructions for cells can be incorporated into tissue engineering scaffolds by patterning the scaffold's architecture and surface chemistry. Our goals for the presented work were to collect data about cell response to three-dimensional, porous scaffolds with uniformly modified surfaces chemistries, and to demonstrate patterning of cell response by patterning surface chemistry. Our system was osteoblast response to poly(l-lactide-co-glycolide) scaffolds modified with poly(ethylene oxide) (PEO). Scaffolds were fabricated using the Three-Dimensional Printing (3DP) process which has control over scaffolds properties to a resolution of approximately 100 microm in all three dimensions. At higher PEO concentrations, adhesion, growth rates, and migration of rat osteoblasts were reduced; alkaline phosphate activity was increased, and cells were less spread and had microvilli. Patterned regions of low and high cell adhesion were demonstrated on scaffolds fabricated with 1 mm thick stripes of PEO and non-PEO regions.

Animals↗
PubMed2004

Engineering principles of clinical cell-based tissue engineering.

Tissue engineering is a rapidly evolving discipline that seeks to repair, replace, or regenerate specific tissues or organs by translating fundamental knowledge in physics, chemistry, and biology into practical and effective materials, devices, systems, and clinical strategies. Stem cells and progenitors that are capable of forming new tissue with one or more connective tissue phenotypes are available from many adult tissues and are defined as connective tissue progenitors. There are four major cell-based tissue-engineering strategies: (1) targeting local connective tissue progenitors where new tissue is desired, (2) transplanting autogenous connective tissue progenitors, (3) transplanting culture-expanded or modified connective tissue progenitors, and (4) transplanting fully formed tissue generated in vitro or in vivo. Stem cell function is controlled by changes in stem cell activation and self-renewal or by changes in the proliferation, migration, differentiation, or survival of the progeny of stem cell activation, the downstream progenitor cells. Three-dimensional porous scaffolds promote new tissue formation by providing a surface and void volume that promotes the attachment, migration, proliferation, and desired differentiation of connective tissue progenitors throughout the region where new tissue is needed. Critical variables in scaffold design and function include the bulk material or materials from which it is made, the three-dimensional architecture, the surface chemistry, the mechanical properties, the initial environment in the area of the scaffold, and the late scaffold environment, which is often determined by degradation characteristics. Local presentation or delivery of bioactive molecules can change the function of connective tissue progenitors (activation, proliferation, migration, differentiation, or survival) in a manner that results in new or enhanced local tissue formation. All cells require access to substrate molecules (oxygen, glucose, and amino acids). A balance between consumption and local delivery of these substrates is needed if cells are to survive. Transplanted cells are particularly vulnerable. Theoretical calculations can be used to explore the relationships among cell density, diffusion distance, and cell viability within a graft and to design improved strategies for transplantation of connective tissue progenitors. Rational strategies for tissue engineering seek to optimize new tissue formation through the logical selection of conditions that modulate the performance of connective tissue progenitors in a graft site to produce a desired tissue. This increasingly involves strategies that combine cells, matrices, inductive stimuli, and techniques that enhance the survival and performance of local or transplanted connective tissue progenitors.

Cell Culture Techniques↗
PubMed2003

Clonal expansion of adult rat hepatic stem cell lines by suppression of asymmetric cell kinetics (SACK).

Adult stem cells have potential use for several biomedical applications, including cell replacement therapy, gene therapy, and tissue engineering. However, such applications have been limited due to difficulties encountered in expanding functional adult stem cells. We have developed a new approach to the problem of adult stem cell expansion based on the suppression of asymmetric cell kinetics (SACK). We postulated that asymmetric cell kinetics, required for adult stem cell function, were a major barrier to their expansion in culture. As such, conversion of adult stem cells from asymmetric cell kinetics to symmetric cell kinetics would promote their exponential expansion and longterm propagation in culture. The purine nucleoside xanthosine (Xs), which promotes guanine ribonucleotide biosynthesis, can be used to reversibly convert cells from asymmetric cell kinetics to symmetric cell kinetics. We used Xs supplementation to derive clonal epithelial cell lines from adult rat liver that have properties of adult hepatic stem cells. The properties of two Xs-derived cell lines, Lig-8 and Lig-13, are described in detail and compared to properties of adult rat hepatic cell lines derived without Xs supplementation. The Xs-derived cell lines exhibit Xs-dependent asymmetric cell kinetics and Xs-dependent expression of mature hepatic differentiation markers. Interestingly, Lig-8 cells produce progeny with properties consistent with hepatocyte differentiation, while Lig-13 progeny cells have properties consistent with bile duct epithelium differentiation. A stable adult cholangiocyte stem cell line has not been previously described. Consistent with the principles of their derivation, the SACK-derived hepatic cell lines exhibit neither senescence nor tumorigenic properties, and their differentiation properties are stable after longterm culture. These characteristics of SACK-derived stem cell lines underscore asymmetric cell kinetics as an essential adult stem cell property with potential to be the basis for a general approach to expansion and propagation of diverse adult stem cells.

Animals↗
PubMed2002

A microfabricated array bioreactor for perfused 3D liver culture.

We describe the design, fabrication, and performance of a bioreactor that enables both morphogenesis of 3D tissue structures under continuous perfusion and repeated in situ observation by light microscopy. Three-dimensional scaffolds were created by deep reactive ion etching of silicon wafers to create an array of channels (through-holes) with cell-adhesive walls. Scaffolds were combined with a cell-retaining filter and support in a reactor housing designed to deliver a continuous perfusate across the top of the array and through the 3D tissue mass in each channel. Reactor dimensions were constructed so that perfusate flow rates meet estimated values of cellular oxygen demands while providing fluid shear stress at or below a physiological range (<2 dyne cm(2)), as determined by comparison of numerical models of reactor fluid flow patterns to literature values of physiological shear stresses. We studied the behavior of primary rat hepatocytes seeded into the reactors and cultured for up to 2 weeks, and found that cells seeded into the channels rearranged extensively to form tissue like structures and remained viable throughout the culture period. We further observed that preaggregation of the cells into spheroidal structures prior to seeding improved the morphogenesis of tissue structure and maintenance of viability. We also demonstrate repeated in situ imaging of tissue structure and function using two-photon microscopy.

Animals↗
PubMed2002

Co-regulation of cell adhesion by nanoscale RGD organization and mechanical stimulus.

Integrin-mediated cell adhesion is central to cell survival, differentiation and motility. Many cell responses induced by integrins require both receptor occupancy and receptor aggregation, and appear to be regulated by both biochemical and biophysical means. Multidomain extracellular matrix molecules may serve to foster integrin aggregation by presenting local clusters of adhesion ligands, a hypothesis supported by studies with synthetic substrates showing that cell adhesion and migration are enhanced when adhesion ligands are presented in nanoscale clusters. Here, we used a novel synthetic polymer system to present the adhesion ligand GRGDSPK in nanoscale clusters with 1.7, 3.6 or 5.4 peptides per cluster against a non-adhesive background, where the peptide is mobile on a 2 nm polyethylene oxide tether. Average ligand density ranged from 190 to 5270 RGD/microm(2). We used these substrates to study the effects of ligand density and clustering on adhesion of wild-type NR6 fibroblasts, which express alphavbeta3 and alpha5beta1, integrins known to bind to linear RGD peptides. The strength of cell-substratum adhesion was quantified using a centrifugal detachment assay to assess the relative number of cells remaining adherent after a 10 minute application of defined distraction force. An unusual relationship between cell detachment and distraction force at relatively low values of applied force was found on substrates presenting the clustered ligand. Although a monotonic decrease in the number of cells remaining attached would be expected with increasing force on all substrates, we instead observed a peak (adhesion reinforcement) in this profile for certain ligand conditions. On substrates presenting clustered ligands, the fraction of cells remaining attached increased as the distraction force was increased to between 70 and 150 pN/cell, then decreased for higher forces. This phenomenon was only observed on substrates presenting higher ligand cluster sizes (n=3.6 or n=5.4) and was more pronounced at higher ligand densities. Adhesion reinforcement was not observed on fibronectin-coated surfaces. These results support previous studies showing that biophysical cues such as ligand spatial arrangement and extracellular matrix rigidity are central to the governance of cell responses to the external environment.

3T3 Cells↗
PubMed2002

Tissue engineering--current challenges and expanding opportunities.

Tissue engineering can be used to restore, maintain, or enhance tissues and organs. The potential impact of this field, however, is far broader-in the future, engineered tissues could reduce the need for organ replacement, and could greatly accelerate the development of new drugs that may cure patients, eliminating the need for organ transplants altogether.

Animals↗
PubMed2002

Carbon dioxide extraction of residual chloroform from biodegradable polymers.

Biodegradable polymeric devices for drug delivery and tissue engineering are often fabricated with the use of organic solvents and may still contain significant amounts of solvent (> 1 wt%) even after aggressive vacuum drying. This excess solvent can interfere with tissue response and the mechanical properties of the devices. The aim of this article is to demonstrate that liquid CO(2) extraction can be used to reduce residual solvent in dense poly(L-lactide-co-glycolide) devices to 50 ppm relatively quickly and with minimal changes in architecture under some conditions. Two liquid CO(2) extraction systems were developed to examine the removal of residual solvents from bar-shaped PLGA devices: (1) a low-pressure (1400 psi) batch system, and (2) a high-pressure (5000 psi) continuous-flow system. Eight hours of extraction in the high-pressure system reduced residual chloroform in 3 mm thick bars below the 50-ppm target. A simple Fickian diffusion model was fit to the extraction results. Diffusion coefficients ranged from 1.10 x 10(-6) cm(2)/s to 2.64 x 10(-6) cm(2)/s. The model predicts that approximately 1 h is needed to dry 1-mm bars to chloroform levels below 50 ppm, and 7 h are needed for 3 mm thick bars. The micro- and macroarchitectures of porous PLGA scaffolds created by particulate leaching were not significantly altered by CO(2) drying if the salt used to make the pores was not removed before drying.

Absorbable Implants↗
PubMed2002

Simulations of cell-surface integrin binding to nanoscale-clustered adhesion ligands.

Clustering of ligated integrins strongly influences integrin signaling and mechanical linkages between integrins and intracellular structures. Extracellular spatial organization of integrin ligands in clusters may facilitate clustering of bound integrins and thus potentially regulate cellular responses to a defined average amount of ligand in the extracellular environment. The possible role of such ligand clustering effects in controlling overall receptor occupancy is studied here using a simple mass-action equilibrium model as well as a two-dimensional Monte Carlo lattice description of the cell-substrate interface, where cell surface receptors are free to diffuse in the plane of the interface and interact with the substrate-immobilized ligand. Results from the analytical treatment and simulation data indicate that for a single-state model in which receptor-ligand binding equilibria are not influenced by neighboring complexes, clustering of ligand does not enhance total receptor binding. However, if receptor binding energy increases in the presence of neighboring ligated receptors, strong ligand spatial distribution effects arise. Nonlinear responses to increasing ligand density are also observed even in the case of random ligand placement due to stochastic juxtaposition of ligand molecules. These results describe how spatial distribution of ligand presented by the extracellular matrix or by synthetic biomimetic materials might control cell responses to external ligands, and suggest a feedback mechanism by which focal contact formation might be initiated.

Animals↗
PubMed2002

A three-dimensional osteochondral composite scaffold for articular cartilage repair.

There is a recognized and urgent need for improved treatment of articular cartilage defects. Tissue engineering of cartilage using a cell-scaffold approach has demonstrated potential to offer an alternative and effective method for treating articular defects. We have developed a unique, heterogeneous, osteochondral scaffold using the TheriForm three-dimensional printing process. The material composition, porosity, macroarchitecture, and mechanical properties varied throughout the scaffold structure. The upper, cartilage region was 90% porous and composed of D,L-PLGA/L-PLA, with macroscopic staggered channels to facilitate homogenous cell seeding. The lower, cloverleaf-shaped bone portion was 55% porous and consisted of a L-PLGA/TCP composite, designed to maximize bone ingrowth while maintaining critical mechanical properties. The transition region between these two sections contained a gradient of materials and porosity to prevent delamination. Chondrocytes preferentially attached to the cartilage portion of the device, and biochemical and histological analyses showed that cartilage formed during a 6-week in vitro culture period. The tensile strength of the bone region was similar in magnitude to fresh cancellous human bone, suggesting that these scaffolds have desirable mechanical properties for in vivo applications, including full joint replacement.

Analysis of Variance↗
PubMed2002

Functional behavior of primary rat liver cells in a three-dimensional perfused microarray bioreactor.

We have previously described the design and operation of a microfabricated bioreactor that supports perfused 3D culture of liver cells and facilitates evolution of tissue-like morphological structures. Here, we describe the functional viability of cells maintained in this microarray bioreactor and examine the influence of different seeding protocols on the evolution of structure and function in comparison with static culture. Primary rat hepatocytes were seeded into the perfusion reactors either as single-cell suspensions immediately after isolation or as spheroidal aggregates formed over a 2- to 3-day period. Initial studies in which cells were cultured for 7 days postisolation revealed significantly greater functional activity and morphological stability of cells that were preaggregated for up to 3 days before seeding in the reactor, compared with direct seeding of single cells. Total albumin secretion and urea genesis rates in single-cell reactor cultures declined significantly during this initial culture period while remaining constant in preaggregated reactor cultures. Longer term studies indicate that rates of albumin secretion and urea genesis are maintained at constant levels through 15 days postisolation. These metabolic rates are an order of magnitude higher than observed for the same preaggregated structures cultured statically with comparable medium ratio and exchange conditions. The metabolic function data are supported by light microscopy images showing viable tissue structures, and electron microscopy images that reveal tight junctions, glycogen storage, and bile canaliculi.

Albumins↗
PubMed2002

Emerging design principles in biomaterials and scaffolds for tissue engineering.

Biomaterials and scaffolds play an essential role in tissue engineering by guiding new tissue growth in vivo and in vitro. While adaptation of existing surgical materials has fulfilled some needs in the field, new applications demand better control of bulk properties such as degradation and of surface properties that control cell interactions. Advances in molecular cell biology are driving the incorporation of new biological moieties into materials, and a set of design principles based on quantitative analysis of key cellular processes involved in regeneration is emerging. At the same time, new materials-processing methodologies are emerging to allow fabrication of these fragile materials into devices appropriate for delivery.

Animals↗