PubMed Health⌕ Search

Biomedical subjects

Ling-Dong Sun

Publications and source records attributed to Ling-Dong Sun.

7 recordsLinked to original sources
PubMed2006

Size-controllable one-dimensional SnO2 nanocrystals: synthesis, growth mechanism, and gas sensing property.

Single crystalline one-dimensional (1-D) SnO(2) nanocrystals with controllable sizes, including the diameter and the aspect ratio, were synthesized by modulating the precursor concentration, reaction time and temperature via a solution method. By regulating the growth in a kinetic regime, a higher temperature range (220-240 degrees C) was beneficial to the growth of SnO(2) nanowires, while reactions below 220 degrees C only resulted in nanorods or even nanoparticles. The aggregates of SnO(2) nanocrystals in the forms of hollow spheres and dendrites were observed as the intermediates for the nanowires. Based on the TEM and SEM observations, the growth mechanism is discussed from the viewpoints of the nature of the reverse micelles and the crystal habit of rutile SnO(2). CO gas sensing measurements were also carried out for SnO(2) nanocrystals with different assembly styles. The results indicate that the sensitivity had close correlation to the specific surface area of the nanocrystals.

Carbon Monoxide↗
PubMed2006

[Spectrum and synthesis of rare earth activated nanoparticle].

La2O3: Eu(3+) nanoparticles were prepared by Gly assistant combustion synthesis with the sizes from 12-28 nm, and a characterization of XRD was done. Spectral properties of the nanoparticles were compared with the bulk. High resolution spectra were measured. Site selective excitation was employed to probe the local environments of Eu(3+) ions in La2O3 nanoparticles. The luminescent centers on the surface and the center of the nanoparticles were excited respectively. The spectra were related to surface information. The luminescence from C3v site and the site with lower symmetry on the surface was distinguished.

English Abstract↗
PubMed2005

Shape-selective synthesis and oxygen storage behavior of ceria nanopolyhedra, nanorods, and nanocubes.

Single-crystalline and uniform nanopolyhedra, nanorods, and nanocubes of cubic CeO2 were selectively prepared by a hydrothermal method at temperatures in the range of 100-180 degrees C under different NaOH concentrations, using Ce(NO3)3 as the cerium source. According to high-resolution transmission electron microscopy, they have different exposed crystal planes: {111} and {100} for polyhedra, {110} and {100} for rods, and {100} for cubes. During the synthesis, the formation of hexagonal Ce(OH)3 intermediate species and their transformation into CeO2 at elevated temperature, together with the base concentration, have been demonstrated as the key factors responsible for the shape evolution. Oxygen storage capacity (OSC) measurements at 400 degrees C revealed that the oxygen storage takes place both at the surface and in the bulk for the as-obtained CeO2 nanorods and nanocubes, but is restricted at the surface for the nanopolyhedra just like the bulk one, because the {100}/{110}-dominated surface structures are more reactive for CO oxidation than the {111}-dominated one. This result suggests that high OSC materials might be designed and obtained by shape-selective synthetic strategy.

Cerium↗
PubMed2005

Hierarchical assembly of SnO2 nanorod arrays on alpha-Fe2O3 nanotubes: a case of interfacial lattice compatibility.

SnO2 nanorod arrays were hierarchically assembled onto the surface of alpha-Fe2O3 nanotubes via a facile solution method. Determined by the hexagonal geometrical nature of the alpha-Fe2O3 nanotubes, the heterostructures were of 6-fold symmetry. HRTEM characterizations demonstrated that the lattice mismatch at the interface was an important factor in determining the growth direction of the secondary nanorod arrays.

Journal Article↗
PubMed2005

Attachment-driven morphology evolvement of rectangular ZnO nanowires.

The rectangular cross-sectional ZnO nanowires were synthesized in a solution method. An attachment-driven growth mechanism was proposed for the morphology evolvement of ZnO nanocrystals from nanoparticles to nanoplates and eventually to nanowires. Due to the pileup attachment of the nanoplates to recrystallize into nanowires, unique one-dimensional (1D) ZnO nanowires with the rectangular cross section were obtained, which is different from those nanowires in the previous reports. It is the first time the evidence that "oriented attachment" can occur not only for nanoparticles but also for nanoplates was obtained, suggesting that "oriented attachment" is an intrinsic behavior for nanosized materials. According to the growth model proposed based on the direct TEM observations, ZnO nanocrystals can be easily controlled as nanoparticles, nanoplates, or nanowires by tuning the synthetic parameters.

Journal Article↗
PubMed2005

Selective synthesis of monazite- and zircon-type LaVO(4) nanocrystals.

Pure monoclinic (m-) and tetragonal phased (t-) LaVO(4) nanocrystals could be obtained by a hydrothermal method in a controllable way with additives. It is found that chelating ligands, such as ethylenediaminetetraacetic acid [EDTA or H(4)L, where L(4-) = (CH(2)COO)(2)N(CH(2))(2)N(CH(2)COO)(2)(4-)], favor the formation of t-LaVO(4) and can induce the polymorph transformation from stable m-LaVO(4) to metastable t-LaVO(4). Further studies demonstrated the important roles of chelating ligands in this transformation process. Careful investigation over the phase transition from t- to m-LaVO(4) was also conducted with high-temperature X-ray diffraction (HTXRD) studies. The phase transition occurred at 850 degrees C, which is about 250 degrees C higher than for the bulk. The enhanced thermal stability of the nanosized metastable t-LaVO(4) may come from the small size effect. Our capability of obtaining and stabilizing t-LaVO(4) not only benefits the wider applications based on LaVO(4) due to the improved luminescent and catalytic performance but also provides a new idea in the studies of polymorph control and selective synthesis of inorganic materials.

Journal Article↗