PubMed Health⌕ Search

Biomedical subjects

Lixin Wu

Publications and source records attributed to Lixin Wu.

At least 19 recordsLinked to original sources

Self-organized microporous structures based on surfactant-encapsulated polyoxometalate complexes.

Self-organized microporous structures based on a series of surfactant-encapsulated polyoxometalate complexes (SECs) have been prepared by using ordered condensed droplets as a template. Among these structures, ordered honeycomb structures were obtained and characterized in detail by taking (DODA)(12)H[Eu(SiW(11)O(39))2] (SEC-1) as an example. Optical microscope, atomic force microscopic, and scanning electron microscopic measurements confirmed the formation of three-dimensional microporous structure, in which the top surface shows a highly ordered honeycomb structure. As compared to common solvent-casting films, the corresponding honeycomb films are more hydrophobic and possess more ordered lamellar structures. Both the wettability and the size of SECs exert significant influence on the formation of microporous structures. The proper hydrophobicity of SECs was proposed to be an essential factor for the formation of honeycomb films, and large-sized SECs are favorable for the fabrication of highly ordered honeycomb structures. The conditions for the formation of different surface morphologies have been discussed in terms of the contact angle of SECs at the interface between water and chloroform, and a contact angle slightly greater than 90 degrees is found to be a prerequisite for the formation of honeycomb structures. The results reported in this paper not only help to further comprehend the mechanism of the formation of honeycomb structures, but also provide some guidance for the design of ordered microporous films based on organic/inorganic hybrid materials, exemplified by the organic/nanoparticle complexes.

Journal Article↗

Thermotropic mesomorphic behavior of surfactant-encapsulated polyoxometalate hybrids.

We investigate in detail novel organic-inorganic hybrid liquid crystalline materials, the complexes of surfactant-encapsulated polyoxometalate clusters (SECs), using thermal, X-ray diffraction, and FT-IR spectroscopic analyses. The differential scanning calorimetry measurements reveal four phase transitions under heating processes. We employ FT-IR spectroscopy to understand these phase behaviors. On the basis of vibration spectral assignments, the evidence suggests that the first two phase transitions are associated with the increase of gauche conformers and the disruption of alkyl chains packing in the heating run; the third phase transition is due to the full conformational disorder of alkyl chains covered on the polyoxometalates (PMs); no significant C-H stretching or wagging vibrations are observed with the fourth transition. We find that the fourth endothermic peak is sensitive to the charges of the PMs, and the transition temperature decreases from 185, 177, to 164 degrees C with decreasing PM charges from 13, 11, to 9, respectively. Interestingly, the temperatures of the first three phase transitions of SECs are essentially independent of the PM charges.

Calorimetry, Differential Scanning↗

Langmuir-Blodgett patterning of phospholipid microstripes: effect of the second component.

We systematically describe the striped pattern formation of the mixed monolayers of 1,2-di(2,4-octadecadienoyl)-sn-glycero-3-phosphocholine (DOEPC) and l-alpha-dipalmitoylphosphatidylcholine (DPPC) from the liquid expanded (LE) phase onto a mica surface by Langmuir-Blodgett (LB) transfer. The addition of the second component, DOEPC, strongly affects the formation of DPPC stripe patterns. When the molar ratio of DPPC and DOEPC is 1:0.1, the horizontal stripes dominate, while in the case of pure DPPC monolayer, there are three kinds of patterns: horizontal stripes, grids, and vertical stripes. The width and periodicity of stripes formed from the mixed monolayers are ca. 4-5 times smaller than those formed from pure DPPC patterns at the same transfer conditions, while the widths of channels are similar. A phase shift of substrate-mediated microphase separation in the two-component system during LB transfer is considered to be the mechanism for the influence of the second component on the formation of DPPC stripe patterns.

Journal Article↗

Self-assembled multibilayers of europium alkanoates: structure, photophysics, and mesomorphic behavior.

A series of europium alkanoates (C(n-1)H(2n-1)CO(2))(3)Eu, (n = 14, 16, 18, 20) have been synthesized and characterized in detail. X-ray diffraction and Fourier transform infrared spectroscopic measurements confirm the multibilayer structure of these homologues. In such bilayers, the europium ionic layers are well separated by the highly ordered alkyl chains which are in an all-trans conformation and perpendicular to both sides of the europium ionic layers. There is a mixed-coordination type of chelating bidentate and bridging bidentate between the carboxylate groups and the europium ions. All samples exhibit characteristic emission of europium, though the luminescent intensity has been partly quenched by the carboxylate groups. Differential scanning calorimetry (DSC) shows multiple melting points for these homologues, and temperature-dependent X-ray diffraction measurements also confirm the existence of the mesophase on heating. This mesophase is not truly liquid crystalline, but is similar to the smectic A phase of organic rodlike molecules. Meanwhile, it seems that with increasing atomic number of lanthanide ions, longer alkyl chains will be required to form such a mesophase for the corresponding lanthanide alkanoates.

Journal Article↗

Self-assembly and micellization of amphiphilic rod-coil block oligomer at the mica-water interface.

In this paper, in situ atomic force microscopy has been used to investigate the micellization and self-assembling structure of an amphiphilic rod-coil block oligomer (EO16OPV) containing a conjugated oligo(phenylene vinylene) dimer and poly(ethylene oxide) at the mica-water interface. It is found that EO16OPV molecules have strong adsorption and aggregation properties on mica. In the wide concentration range from above the critical micelle concentration (cmc) to far below the cmc, a closely packed layer of stripe-like micelles with two preferred orientations can be formed at the mica-water interface. A cylindrical micelle structure for the stripes is proposed. We demonstrate that the stripe-like micelles formed on mica originate from different micellization processes at solution concentrations above and below the cmc. The origins of the strong micellization properties and oriented arrangement of the stripes are also discussed.

Journal Article↗

Self-assembling structures and thin-film microscopic morphologies of amphiphilic rod-coil block oligomers.

This paper examines the influences of solvent evaporation and atmosphere humidity on self-assembling structures and thin-film microscopic morphologies of amphiphilic rod-coil block oligomers (EOnOPV) containing conjugated oligo(phenylene vinylene) dimer (OPV) coupled to poly(ethylene oxide) (PEO; n, the average number of ethylene oxides, is 16, 12, 7, and 3, respectively) on hydrophilic substrates. Atomic force microscopy (AFM), UV-vis absorption, and small angle X-ray diffraction are employed to investigate the thin-film morphology and structure. Solvent evaporation and atmosphere humidity are found to exert a strong influence on thin-film morphology and structure. Under the condition of quick evaporation and dry atmosphere, all EOnOPV oligomers form the monolayer islands. Increasing the solute volume, both EO16OPV and EO12OPV oligomers can form the polar lamellas with a head-to-tail packing arrangement. Under the condition of slow evaporation and humid atmosphere, EO16OPV and EO12OPV may self-assembly into curvy nanoribbons with well-defined width and curvature radii on mica, while EO7OPV and EO3OPV with the shorter PEO coils do not form. A symmetric bilayer structure for the ribbons is proposed. Plausible reasons for the variation in thin-film morphology are discussed, based on the results obtained from investigation of PEO coil length, solvent evaporation, and atmosphere humidity effects.

Journal Article↗

The miscibility of poly(D,L-lactide-co-glycolide) with amphiphilic molecules and the interaction of their mixtures with DNA at air/water interface.

The miscibility of poly(D,L-lactide-co-glycolide) (PLG) with three amphiphilic molecules and the interaction of the PLG/surfactant mixtures with DNA at air/water interface are investigated by pi-A isotherms, Brewster angle microscopy (BAM) and atomic force microscopy (AFM) techniques. The pi-A isotherms of the PLG mixtures with cationic C(12)AzoC(6)PyBr, and C(12)AzoC(6)N(CH(3))(3)Br, are quite different from the pi-A isotherm of pure PLG on water subphase. In contrast to the case, the pi-A isotherm of PLG mixed with nonionic C(12)AzoC(6)OPy is almost identical to the pure PLG except some increasing of molecular area. Similar phenomena are observed on DNA subphase. The in situ BAM and ex situ AFM observations demonstrate that the dispersion of PLG at air/water interface becomes good when it mixes with the two cationic surfactants, whereas quite poor due to the phase separation when it mixes with the nonionic amphiphilic molecule. Based on these results we conclude that the cationic surfactants can affect the conformation change of PLG at air/water interface and figure a well miscibility with polymer whereas the nonionic amphiphilic molecule presents poor miscibility. In addition, the even mixing of the PLG and the cationic surfactants is favorable for the adsorption to DNA more effectively.

Azo Compounds↗

Polyoxometalate-based vesicle and its honeycomb architectures on solid surfaces.

The introduction of cationic surfactant DODA as counterions of [Eu(H2O)2SiW11O39]5- can form a mesoscopic supramolecular assembly of (DODA)4H[Eu(H2O)2SiW11O39], which aggregates into vesicles in chloroform. This POM-based vesicle can be further transferred into three-dimensional microporous architectures under moist air. The present methodology shows that, by combining inorganic chemistry and colloidal surface chemistry, a sequential self-assembling approach based on a series of linkable preorganized building blocks allows access to the fabrication of technological applicably POM-based microsized patterns, alternated with the soft lithographic method.

Journal Article↗

Length-controlled rodlike self-assemblies in binary mixed langmuir-blodgett monolayers on mica.

In this paper, atomic force microscopy (AFM) has been used to investigate the morphology of monolayers of the amphiphilic rod-coil diblock molecule (EO7OPV) containing oligo(phenylene vinylene) dimer (OPV) and poly(ethylene oxide) (PEO) as well as the morphology of mixed monolayers of EO7OPV and palmitic acid (PA) deposited onto mica by the Langmuir-Blodgett technique. At surface pressures higher than 3 mN/m, EO7OPV forms regular-shaped aggregates with a monomolecular layer structure, where the hydrophilic PEO blocks are adsorbed onto the mica substrate and the hydrophobic OPV blocks form an ordered crystalline OPV layer on the top of the PEO layer through the strong pi-pi stacking interaction. In the mixed LB monolayers of EO7OPV and PA, the phase separation occurs. At a certain mixed ratio, EO7OPV molecules form rodlike domains with regular shape and uniform size at surface pressures higher than 3 mN/m. With the increase of the molar fraction of PA, the rodlike domains consisting of EO7OPV are elongated. The length of the rodlike domains can be tuned easily in a large range by altering the molar ratio of EO7OPV and PA. In addition, the rodlike domains are oriented to specific directions, corresponding to the directions of the potassium ion array on the mica surface having 6-fold symmetry. We demonstrate the possible formation mechanism and the elongation origin of rodlike domains in mixed LB monolayers and propose the two-step formation process of oriented rodlike domains deposited onto the mica substrate.

Journal Article↗

Surfactant encapsulated DNA: structure characterization and interaction with dye molecules in organic media.

The recognition of electrostatically-bound DNA-didodecyldimethylammonium (DNA-DDDA) complex by three dye molecules, acridine orange (AO), ethidium bromide (EB) and 5,10,15,20-tetrakis(4-N-methylpyridyl) porphyrin tetra(p-toluenesulfonate) (TMPyP) in organic media was investigated through 1H NMR, UV-vis, and circular dichroism (CD) spectroscopies. When the organic solvent in which DNA-DDDA complex dissolves is changed from ethanol to chloroform, the adsorbed AO undergoes a reversible transformation from a monomer to a highly aggregated state at the interface between DNA and DDDA. EB also adsorbs at the interface between DNA and DDDA when EB interacts with the DNA-DDDA complex in organic media, but its existing state is independent of the used solvents. The third dye, TMPyP cation can intercalate into the G-C region while its anionic p-tosylate counterion remains unbound when it mixes with DNA complex in organic media. The complexes of DDDA with previously recognized DNA by the three dye molecules (DNA-dye), respectively, are also investigated. AO seems having changed its location from the grooves of DNA to the interface between DNA and DDDA after DNA-AO complex was electrostatically encapsulated with DDDA. The aggregation behavior of AO also shows a dependence on the polarity of the organic solvent. EB molecules are believed to intercalate into the base pairs of DNA in aqueous solution. The intercalation mode is still maintained after the encapsulation for DNA-EB in organic solvents, which is different from the situation between DNA-DDDA complex and EB. But in both cases, the existing states of EB are independent of the polarity of the organic solvents. Finally, TMPyP in the complex of DNA-TMPyP and DDDA is also judged to intercalate into the G-C region of DNA while its anionic p-tosylate counterion remains separated from DNA complex, which is similar to its interaction with DNA-DDDA complex in organic media. These data also strongly suggest that the intercalation state of TMPyP is more stable than its adsorption state in grooves when it is recognized with DNA. The present results are significant for the designs of both laser dye and conductive materials.

Animals↗

Structural and orientational studies of chiral N-[4(1-pyrene)butyroyl]-phenylalanine in cast film.

Cast films of chiral material N-[4(1-pyrene)butyroyl]-l-phenylalanine (Py-l-Phe) and the racemic modification (the 1:1 mixture of Py-l-Phe and Py-d-Phe) have been investigated in the present study. The microscopic structure, molecular orientation and the aggregation in the film have been studied by using ultraviolet-visible (UV-vis) and infrared (IR) spectroscopy. When a cast film is formed from the chloroform solution at room temperature, the J-aggregates of Py-l-Phe and Py-d-Phe are observed by UV-vis spectra. A comparison of Fourier transform infrared (FT-IR) transmission and reflection-absorption (RA) spectroscopy has been applied to reveal the orientation and structural characterization of the cast films. It has been found that the pyrenyl ring in the cast film of Py-l-Phe assumes a nearly vertical orientation with respect to the surface of the solid substrate. And there are two different hydrogen bonding species, cyclic dimer and linear dimer, exist in carboxyl groups in cast films. The detailed analysis of the OH and NH stretching modes of Py-l-Phe and Py-d-Phe allows us to reveal the hydrogen bonds existing in the films.

Chloroform↗

Surfactant-encapsulated polyoxometalloeuropate: polarized Eu3+ emission in the highly ordered self-organizing film.

An organic/inorganic composite, (DODA)(9)EuW(10)O(36).9H(2)O, can form a highly ordered self-organizing film with a layered structure and almost fully interdigitated alkyl chains at solid supports. EuW10O36(9-) is deduced to be oriented in its self-organizing film, resulting in its polarized emission, which offers an accessible approach to fabricating the functional thin films containing polyoxometalates.

Journal Article↗

Polyoxometalates matrixed into surfactants: synthesis, characterizations, and conformations of surfactants.

We synthesized two surfactant-encapsulated polyoxometalate (POM) clusters (SECs), (DODA)(15)[H(3)Mo(57)V(6)(NO)(6)O(189)(H(2)O)(12)(VO)(6)].13H(2)O (SEC-2, DODA: dimethyldioctadecyl ammonium) and (DODA)(12)[Eu(H(2)O)P(5)W(30)O(110)].28H(2)O (SEC-3). SECs were characterized in detail by elemental analysis, UV-Vis absorption spectroscopy, FTIR, 1H NMR, thermogravimetric analysis, Langmuir isotherms, and powdered X-ray diffractions. SEC-2 can form a stable monolayer at the air-water interface. SEC-2 and SEC-3 possess a layered structure with periodicities of 3.8 and 5.05 nm, respectively. Alkyl chains in SEC-2 are disordered, but SEC-3 is indicative of well-ordered alkyl chains. According to the simplified structural analysis for SEC-2 and SEC-3, DODAs occupy areas of 1.12 and 0.589 nm(2) on the surface of the POMs, which are characteristic of the liquid-like and crystalline-like phases for DODA, respectively. The different conformations of DODAs then lead to the different packing structures of SECs. This work is aiming to control the organizational structures of the POM-based materials by selecting the appropriate POMs.

Journal Article↗

[Research advances in ecophysiological effects of starvation on crustacean].

As a major environmental stress, starvation greatly and extensively affects crustacean in ecophysiological aspects. In this paper, the existing information on the ecophysiological responses of crustacean to starvation, including development and survival, metabolism, digestive gland and enzyme, body composition, and recovery growth was summarized, and on the basis of these, the future research directions, i. e., the compensatory growth and its mechanism, and the relationship between starvation and immunocompetence, were proposed.

Animals↗

Hydrogen-bonded 1,2-bis(4-pyridyl)ethylene and maleic acid.

The title compound (systematic name: 4,4'-ethylenedipyridinium dimaleate), C(12)H(12)N(2)(2+).2C(4)H(3)O(4)(-), is a 1:2 adduct of 1,2-bis(4-pyridyl)ethylene (BPE) and maleic acid (MA). The interaction between the two components in the molecular complex is due to intermolecular hydrogen bonding via an N(+)-H.O(-) hydrogen bond.

Journal Article↗