PubMed Health⌕ Search

Biomedical subjects

Luis G Ullate

Publications and source records attributed to Luis G Ullate.

2 recordsLinked to original sources

Beam steering with segmented annular arrays.

Two-dimensional (2-D) arrays of squared matrix have maximum periodicity in their main directions; consequently, they require half wavelength (lambda/2), interelement spacing to avoid grating lobes. This condition gives rise to well-known problems derived from the huge number of array elements and from their small size. In contrast, 2-D arrays with curvilinear configuration produce lower grating lobes and, therefore, allow the element size to be increased beyond lambda/2. Using larger elements, these arrays have the advantage of reducing the number of elements and of increasing the signal-to-noise ratio (SNR). In this paper, the beamforming properties of segmented annular phased arrays are theoretically analyzed and compared with the equivalent squared matrix array. In the first part, point-like elements are considered in order to facilitate the field analysis with respect to the array structure. Afterward, the effect of the element size on the steered beam properties also is presented. In the examples, it is shown that the segmented annular array has notably lower grating lobes than the equivalent squared matrix array and that it is possible to design segmented annular arrays with interelement distance higher than lambda whose beam characteristics are perfectly valid for volumetric imaging applications.

Letter↗

3D computational method to study the focal laws of transducer arrays for NDE applications.

Based on the impulse response and the discrete representation methods, a 3D computational method has been developed to calculate the optimal focal laws to focus the ultrasonic beams through interfaces of complex geometry, and the respective transmitted ultrasonic field generated by NDE transducer arrays. 1- and 2D array transducers are considered. Two different focusing techniques are used to obtain the time delays: the first travel time on each center of the array element, and the cross correlation between the simulated signals from neighboring array elements. Applying the time delays to the array, the transmitted field can be simulated using the same computational method. Several simulations were performed to present the ability of the computational method to focus through, for instance, curved and plane surfaces between two media (acrylic-steel). A comparison between the two focusing techniques is presented.

Journal Article↗