PubMed Health⌕ Search

Biomedical subjects

Luis Moroder

Publications and source records attributed to Luis Moroder.

At least 37 records · Page 2Linked to original sources
PubMed2004

Incorporation of integrins into artificial planar lipid membranes: characterization by plasmon-enhanced fluorescence spectroscopy.

An optimized peptide-tethered artificial lipid membrane system has been developed. Integrins (cell adhesion receptors) were functionally incorporated into this membrane model and integrin-ligand interactions were analyzed by surface plasmon-enhanced fluorescence spectroscopy (SPFS). The transmembrane receptors alpha(v)beta(3) and alpha(1)beta(1) of the integrin superfamily were incorporated into a lipid-functionalized peptide layer by vesicle spreading. Consecutive layer formations were monitored by surface plasmon spectroscopy (SPS). Orientation and accessibility of the membrane receptor alpha(v)beta(3) was reliably assessed by specific and reproducible binding of selective antibodies. Moreover, full retention of the functional properties of this receptor was verified by specific and reversible binding of natural ligands. Functional integrity of incorporated integrins was maintained over a time period of 72 h. The integrin/extracellular matrix ligand complexes, whose formations are known to depend on the presence of divalent cations, were lost upon addition of ethylenediaminetetraacetate. Therefore, regeneration of the surface for further binding experiments with minimized unspecific ligand association was possible. These results demonstrate that integrins can be functionally incorporated into peptide-tethered artificial membranes. In combination with the SPS/SPFS method, this artificial membrane system provides a reliable experimental platform for investigation of isolated membrane proteins under experimental conditions resembling those of their native environment.

Antibodies↗
PubMed2004

Structural properties and photophysical behavior of conformationally constrained hexapeptides functionalized with a new fluorescent analog of tryptophan and a nitroxide radical quencher.

The influence of the conformational properties on the photophysics of two de novo designed hexapeptides was studied by spectroscopic measurements (ir, NMR, steady-state, and time resolved fluorescence) and molecular mechanics calculations. The peptide sequences comprise two nonproteinogenic residues: a beta-(1-azulenyl)-L-alanine (Aal) residue, obtained by formally functionalizing the Ala side chain with the azulene chromophore, and a Calpha-tetrasubstituted alpha-amino acid (TOAC), incorporating a nitroxide group in a cycloalkyl moiety. Aal represents a new fluorescent, quasi-isosteric Trp analog and TOAC a stable radical species, frequently used as a paramagnetic probe in biochemical studies. The peptide chains differ in the sequence position of the two probes and are heavily based on Aib (alpha-aminoisobutyric acid) residues to generate conformationally restricted helical structures, as confirmed by both spectroscopic and computational results. The conformationally controlled, excited state interactions, determining the photophysical relaxation of the Aal*/TOAC pair, are also discussed.

Antioxidants↗
PubMed2004

The glycoprotein NOWA and minicollagens are part of a disulfide-linked polymer that forms the cnidarian nematocyst wall.

The nematocyst is a unique extrusive organelle involved in the defense and capture of prey in cnidarians. Minicollagens and the glycoprotein NOWA are major components of the nematocyst capsule wall, which resists osmotic pressure of 15 MPa. Here we present the recombinant expression of NOWA, which spontaneously assembles to globular macromolecular particles that are sensitive to reduction as the native wall structure. Ultra-structural analysis showed that the Hydra nematocyst wall is composed of several layers of globular particles, which are interconnected via radiating rodlike protrusions. Evidence is presented that native wall particles contain NOWA and minicollagen, supposed to be linked via disulfide bonds between their homologous cysteine-rich domains. Our data suggest a continuous suprastructure of the nematocyst wall, assembled from wall proteins that share a common oligomerization motif.

Animals↗
PubMed2004

A new method to determine the structure of the metal environment in metalloproteins: investigation of the prion protein octapeptide repeat Cu(2+) complex.

Since high-intensity synchrotron radiation is available, "extended X-ray absorption fine structure" spectroscopy (EXAFS) is used for detailed structural analysis of metal ion environments in proteins. However, the information acquired is often insufficient to obtain an unambiguous picture. ENDOR spectroscopy allows the determination of hydrogen positions around a metal ion. However, again the structural information is limited. In the present study, a method is proposed which combines computations with spectroscopic data from EXAFS, EPR, electron nuclear double resonance (ENDOR) and electron spin echo envelope modulation (ESEEM). From EXAFS a first picture of the nearest coordination shell is derived which has to be compatible with EPR data. Computations are used to select sterically possible structures, from which in turn structures with correct H and N positions are selected by ENDOR and ESEEM measurements. Finally, EXAFS spectra are re-calculated and compared with the experimental data. This procedure was successfully applied for structure determination of the Cu(2+) complex of the octapeptide repeat of the human prion protein. The structure of this octarepeat complex is rather similar to a pentapeptide complex which was determined by X-ray structure analysis. However, the tryptophan residue has a different orientation: the axial water is on the other side of the Cu.

Algorithms↗
PubMed2004

Binding mode of TMC-95A analogues to eukaryotic 20S proteasome.

The complex thermodynamics that govern noncovalent protein-ligand interactions are still not fully understood, despite the exponential increase in experimental structural data available from X-ray crystallography and NMR spectroscopy. The eukaryotic 20S proteasome offers an ideal system for such studies as it contains in duplicate three proteolytically active sites with different substrate specificities. The natural product TMC-95A inhibits these proteolytic centers noncovalently with distinct affinities. X-ray crystallographic analysis of the complexes of the yeast proteasome core particle with this natural inhibitor and two synthetic analogues clearly revealed highly homologous hydrogen-bonding networks involving mainly the peptide backbone despite the strongly differentiated binding affinities to the three active sites of the 20S proteasome. The natural product and the two analogues are constrained in a rigid beta-type extended conformation by the endocyclic biaryl clamp, which preorganizes the peptide backbone for optimal adaptation of the ligands to the active site clefts and thus favors the binding processes entropically. However, the biaryl clamp also dictates the orientation of the P1 and P3 residues and their mode of interaction with the protein binding subsites. This limitation is optimally solved in TMC-95A with the conformationally restricted (Z)-prop-1-enyl group acting as P1 residue, at least for the chymotrypsin-like active site; however, it critically affects the inhibitory potencies of the analogues, thus suggesting the use of less-rigid endocyclic clamps in the design of proteasome inhibitors that allow for a better presentation of residues interacting with the active site clefts of the enzyme.

Binding Sites↗
PubMed2004

Crystal structure of NS-134 in complex with bovine cathepsin B: a two-headed epoxysuccinyl inhibitor extends along the entire active-site cleft.

The crystal structure of the inhibitor NS-134 in complex with bovine cathepsin B reveals that functional groups attached to both sides of the epoxysuccinyl reactive group bind to the part of active-site cleft as predicted. The -Leu-Pro-OH side binds to the primed binding sites interacting with the His110 and His111 residues with its C-terminal carboxy group, whereas the -Leu-Gly-Meu (-Leu-Gly-Gly-OMe) part (Meu, methoxycarbonylmethyl) binds along the non-primed binding sites. Comparison with the propeptide structures of cathepsins revealed that the binding of the latter part is least similar to the procathepsin B structure; this result, together with the two-residue shift in positioning of the Leu-Gly-Gly part, suggests that the propeptide structures of the cognate enzymes may not be the best starting point for the design of reverse binding inhibitors.

Animals↗
PubMed2004

The G-protein-coupled CCK2 receptor associates with phospholipase Cgamma1.

In ElasCCK2 transgenic mice expressing cholecystokinin (CCK2) receptor in acinar cells, pancreatic phenotypic alterations and preneoplastic lesions are observed. We determined whether activation of phospholipase C gamma1 (PLCgamma1), known to contribute to the tumorigenesis pathophysiology, could take place as a new signaling pathway induced by the CCK2 receptor. Overexpression and activation of the PLCgamma1 in response to gastrin was observed in acinar cells. The possibility that the C-terminal tyrosine 438 of the CCK2 receptor associates with the SH2 domains of PLCgamma1 was examined. A specific interaction was demonstrated using surface plasmon resonance, confirmed in a cellular system and by molecular modeling.

Amino Acid Sequence↗
PubMed2004

The structure of the Cys-rich terminal domain of Hydra minicollagen, which is involved in disulfide networks of the nematocyst wall.

The minicollagens found in the nematocysts of Hydra constitute a family of invertebrate collagens with unusual properties. They share a common modular architecture with a central collagen sequence ranging from 14 to 16 Gly-X-Y repeats flanked by polyproline/hydroxyproline stretches and short terminal domains that show a conserved cysteine pattern (CXXXCXXXCXXX-CXXXCC). The minicollagen cysteine-rich domains are believed to function in a switch of the disulfide connectivity from intra- to intermolecular bonds during maturation of the capsule wall. The solution structure of the C-terminal fragment including a minicollagen cysteine-rich domain of minicollagen-1 was determined in two independent groups by 1H NMR. The corresponding peptide comprising the last 24 residues of the molecule was produced synthetically and refolded by oxidation under low protein concentrations. Both presented structures are identical in their fold and disulfide connections (Cys2-Cys18, Cys6-Cys14, and Cys10-Cys19) revealing a robust structural motif that is supposed to serve as the polymerization module of the nematocyst capsule.

Amino Acid Motifs↗
PubMed2004

Conformational and molecular modeling studies of beta-cyclodextrin-heptagastrin and the third extracellular loop of the cholecystokinin 2 receptor.

The conformational features of a conjugate of the C-terminus of human gastrin (HG[11-17]), the shortest gastrin sequence retaining biological function, with beta-cyclodextrin ([Nle(15)]-HG[11-17]-betaCD) were determined by NMR spectroscopy in an aqueous solution of dodecylphosphocholine (DPC) micelles. The peptide-betaCD conjugate displays a binding affinity and activation profile comparable to those of HG[11-17] at the cholecysokinin 2 (CCK(2)) receptor, the G protein-coupled receptor responsible for the gastrointestinal function of gastrin. The structure of the peptide consisted of a well-defined beta-turn between Gly(13) and Asp(16) of gastrin. The structural preferences of [Nle(15)]-HG[11-17]-betaCD in DPC micelles and the 5-doxylstearate-induced relaxation of the (1)H NMR resonances support a membrane-associated receptor recognition mechanism. Addition of [Nle(15)]-HG[11-17]-betaCD to the third extracellular loop domain of the CCK(2) receptor, CCK(2)-R(352-379), generated a number of intermolecular nuclear Overhauser enhancements (NOEs) and chemical shift perturbations. NOE-restrained MD simulations of the [Nle(15)]-HG[11-17]-betaCD-CCK(2)-R complex produced a topological orientation in which the C-terminus was located in a shallow hydrophobic pocket near the confluence of TM2 and -3. Despite the steric bulk and physicochemical properties of betaCD, the [Nle(15)]-HG[11-17]-betaCD-CCK(2)-R complex is similar to the CCK-8-CCK(2)-R complex determined previously, providing insight into the mode of ligand binding and the role of electrostatic interactions.

Amino Acid Sequence↗
PubMed2004

A (4R)- or a (4S)-fluoroproline residue in position Xaa of the (Xaa-Yaa-Gly) collagen repeat severely affects triple-helix formation.

The triple-helical fold of collagen requires the presence of a glycine residue at every third position in the peptide sequence and is stabilized by proline and (4R)-4-hydroxyproline residues in positions Xaa and Yaa of the (Xaa-Yaa-Gly) triplets, respectively. Regular down/up puckering of these Xaa/Yaa residues is possibly responsible for the tight packing of the three peptide strands, which have a polyproline-II-like structure, into the supercoiled helix. (4R)-Configured electronegative substituents such as a hydroxy group or a fluorine substituent on the pyrrolidine ring of the residue in the Yaa position favor the up pucker and thus significantly stabilize the triple helix. A similar effect was expected from the corresponding (4S)-isomers in the Xaa positions, but the opposite effect has been observed with (4S)-hydroxyproline, a result that has been speculatively attributed to steric effects. In this study, (4R)- and (4S)-fluoroproline residues were introduced into the Xaa position and potential steric effects were thus avoided. Contrary to expectations, (4S)-fluoroproline prevents triple-helix formation, whereas (4R)-fluoroproline stabilizes the polyPro II conformation, but without supercoiling of the three strands. The latter observation suggests that folding of the single chains into a polyproline II helix is not directly associated with triple helix formation and that fine tuning of van der Waals contacts, electrostatic interactions, and stereoelectronic effects is required for optimal packing into a triple helix.

Amino Acid Sequence↗
PubMed2004

Synthetic heterotrimeric collagen peptides as mimics of cell adhesion sites of the basement membrane.

Collagen type IV forms a network in the basement membrane into which other constituents of the tissue are incorporated. It also provides cell-adhesion sites that are specifically recognized by cell-surface receptors, i.e., the integrins. Different from the ubiquitous sequential RGD adhesion motif found in most of the matrix proteins, in collagen type IV, the responsible binding sites for alpha1beta1 integrin have been identified as Asp461 of the two alpha1 chains and Arg461 of the alpha2 chain. Because of the heterotrimeric character of this collagen, the spatial geometry of the binding epitope depends not only on the triple-helical fold, but decisively even on the stagger of the chains. To investigate the effects of chain registration on the conformational properties and binding affinities of this adhesion epitope, two synthetic heterotrimeric collagen peptides consisting of the identical three chains were assembled by an artificial cystine knot in two different registers, i.e., in the most plausible alpha2alpha1alpha1' and less probable alpha1alpha2alpha1' chain alignment. A detailed conformational characterization of both trimers allowed to correlate their different binding affinities for alpha1beta1 integrin with the degree of local plasticity of the two different triple helices. Optimal local breathing of the rod-shaped collagens is apparently crucial for selective recognition by proteins interacting with these main components of the extracellular matrix.

Basement Membrane↗
PubMed2004

Micellar environments induce structuring of the N-terminal tail of the prion protein.

In the physiological form, the prion protein is a glycoprotein tethered to the cell surface via a C-terminal glycosylphosphatidylinositol anchor, consisting of a largely alpha-helical globular C-terminal domain and an unstructured N-terminal portion. This unstructured part of the protein contains four successive octapeptide repeats, which were shown to bind up to four Cu(2+) ions in a cooperative manner. To mimic the location of the protein on the cell membrane and to analyze possible structuring effects of the lipid/water interface, the conformational preferences of a single octapeptide repeat and its tetrameric form, as well of the fragment 92-113, proposed as an additional copper binding site, were comparatively analyzed in aqueous and dodecylphosphocholine micellar solution as a membrane mimetic. While for the downstream fragment 92-113 no conformational effects were detectable in the presence of DPC micelles by CD and NMR, both the single octapeptide repeat and, in an even more pronounced manner, its tetrameric form are restricted into well-defined conformations. Because of the repetitive character of the rigid structural subdomain in the tetrarepeat molecule, the spatial arrangement of these identical motifs could not be resolved by NMR analysis. However, the polyvalent nature of the repetitive subunits leads to a remarkably enhanced interaction with the micelles, which is not detectably affected by copper complexation. These results strongly suggest interactions of the cellular form of PrP (PrP(c)) N-terminal tail with the cell membrane surface at least in the octapeptide repeat region with preorganization of these sequence portions for copper complexation. There are sufficient experimental facts known that support a physiological role of copper complexation by the octapeptide repeat region of PrP(c) such as a copper-buffering role of the PrP(c) protein on the extracellular surface.

Amino Acid Sequence↗
PubMed2003

The role of cystine knots in collagen folding and stability, part I. Conformational properties of (Pro-Hyp-Gly)5 and (Pro-(4S)-FPro-Gly)5 model trimers with an artificial cystine knot.

In analogy to the cystine knots present in natural collagens, a simplified disulfide cross-link was used to analyse the conformational effects of a C-terminal artificial cystine knot on the folding of collagenous peptides consisting of solely (Pro-Hyp-Gly) repeating units. Assembly of the alpha chains into a heterotrimer by previously applied regioselective disulfide-bridging strategies failed because of the high tendency of (Pro-Hyp-Gly)(5) peptides to self-associate and form homotrimers. Only when side-chain-protected peptides were used, for example in the Hyp(tBu) form, and a new protection scheme was adopted, selective interchain-disulfide cross-linking into the heterotrimer in organic solvents was successful. This unexpected strong effect of the conformational properties on the efficiency of well-established reactions was further supported by replacing the Hyp residues with (4S)-fluoroproline, which is known to destabilise triple-helical structures. With the related [Pro-(4S)-FPro-Gly](5) peptides, assembly of the heterotrimer in aqueous solution proceeded in a satisfactory manner. Both the intermediates and the final fluorinated heterotrimer are fully unfolded in aqueous solution even at 4 degrees C. Conversely, the disulfide-crossbridged (Pro-Hyp-Gly)(5) heterotrimer forms a very stable triple helix. The observation that thermal unfolding leads to scrambling of the disulfide bridges was unexpected. Although NMR experiments support an extension of the triple helix into the cystine knot, thermolysis is not associated with the unfolding process. In fact, the unstructured fluorinated trimer undergoes an equally facile thermodegradation associated with the intrinsic tendency of unsymmetrical disulfides to disproportionate into symmetrical disulfides under favourable conditions. The experimental results obtained with the model peptides fully support the role of triple-helix nucleation and stabilisation by the artificial cystine knot as previously suggested for the natural cystine knots in collagens.

Amino Acid Sequence↗
PubMed2003

The role of cystine knots in collagen folding and stability, part II. Conformational properties of (Pro-Hyp-Gly)n model trimers with N- and C-terminal collagen type III cystine knots.

In mature collagen type III the homotrimer is C-terminally cross-linked by an interchain cystine knot consisting of three disulfide bridges of unknown connectivity. This cystine knot with two adjacent cysteine residues on each of the three alpha chains has recently been used for the synthesis and expression of model homotrimers. To investigate the origin of correct interchain cysteine pairings, (Pro-Hyp-Gly)(n) peptides of increasing triplet number and containing the biscysteinyl sequence C- and N-terminally were synthesised. The possibilities were that this origin may be thermodynamically coupled to the formation of the collagen triple helix as happens in the oxidative folding of proteins, or it could represent a post-folding event. Only with five triplets, which is known to represent the minimum number for self-association of collagenous peptides into a triple helix, air-oxidation produces the homotrimer in good yields (70 %), the rest being intrachain oxidised monomers. Increasing the number of triplets has no effect on yield suggesting the formation of kinetically trapped intermediates, which are not reshuffled by the glutathione redox buffer. N-terminal incorporation of the cystine knot is significantly less efficient in the homotrimerisation step and also in terms of triple-helix stabilisation. Compared to an artificial C-terminal cystine knot consisting of two interchain disulfide bridges, the collagen type III cystine knot produces collagenous homotrimers of remarkably high thermostability, although the concentration-independent refolding rates are not affected by the type of disulfide bridging. Since the natural cystine knot allows ready access to homotrimeric collagenous peptides of significantly enhanced triple-helix thermostability it may well represent a promising approach for the preparation of collagen-like innovative biomaterials. Conversely, the more laborious regioselectively formed artificial cystine knot still represents the only synthetic strategy for heterotrimeric collagenous peptides.

Amino Acid Sequence↗
PubMed2003

Expansion of the genetic code enables design of a novel "gold" class of green fluorescent proteins.

Much effort has been dedicated to the design of significantly red shifted variants of the green fluorescent protein (GFP) from Aequoria victora (av). These approaches have been based on classical engineering with the 20 canonical amino acids. We report here an expansion of these efforts by incorporation of an amino substituted variant of tryptophan into the "cyan" GFP mutant, which turned it into a "gold" variant. This variant possesses a red shift in emission unprecedented for any avFP, similar to "red" FPs, but with enhanced stability and a very low aggregation tendency. An increasing number of non-natural amino acids are available for chromophore redesign (by engineering of the genetic code) and enable new general strategies to generate novel classes of tailor-made GFP proteins.

Animals↗
PubMed2003

Picosecond conformational transition and equilibration of a cyclic peptide.

Ultrafast IR spectroscopy is used to monitor the nonequilibrium backbone dynamics of a cyclic peptide in the amide I vibrational range with picosecond time resolution. A conformational change is induced by means of a photoswitch integrated into the peptide backbone. Although the main conformational change of the backbone is completed after only 20 ps, the subsequent equilibration in the new region of conformational space continues for times >16 ns. Relaxation and equilibration processes of the peptide backbone occur on a discrete hierarchy of time scales. Albeit possessing only a few conformational degrees of freedom compared with a protein, the peptide behaves highly nontrivially and provides insights into the complexity of fast protein folding.

Peptides, Cyclic↗