PubMed Health⌕ Search

Biomedical subjects

M A Bottino

Publications and source records attributed to M A Bottino.

14 recordsLinked to original sources
PubMed2006

Early biofilm colonization on polished- and glazed-zirconium ceramic surface. Preliminary results.

AIM: The purpose of this study was to evaluate the effect of ceramic surface polishing procedure on the early dental biofilm formation on zirconium ceramics. METHODS: Twenty samples (discs shape) of tetragonal zirconium polycrystal stabilized with yttrium ceramics (Y-TZP) for LAVA system were fabricated (5 mm diameter and 1.5 mm thickness). Two patients with high level of dental hygiene were selected for this study. Oral devices covering the crowns of the upper premolars and molars were fabricated for each participant. Glazed and polished samples of Y-TZP ceramics were fixed on the vestibular and palatal zones of the devices. After 20 min (8 samples) and 1 h (8 samples) in the oral environment, the samples were removed and analyzed in a scanning electron microscope. The surface topographies of 4 ceramic samples (2 glazed and 2 polished) were analyzed (control group: without exposition in oral environment). RESULTS: The glazed samples showed a more irregular surface than polished samples. Deposition of granular aggregates was verified on all the samples in the two times of the study analyzed. This granular material coated more intensely on irregular areas, and its thickness increased after 1 h. No difference was observed as to bacterial morphology in any time of the study. Cocci and rods-shaped prevailed. CONCLUSIONS: Glazed surfaces presented larger tendency to dental biofilm accumulation.

Adult↗
PubMed2000

Marginal fit of nickel-chromium copings before and after internal adjustments with duplicated stone dies and disclosing agent.

STATEMENT OF PROBLEM: Despite careful procedures, master stone dies may be damaged during laboratory procedures. The dentist routinely adjusts castings because the marginal fit of casting is not as accurate as on the dies. PURPOSE: This study evaluated the technique of internal adjustment of castings with use of duplicated stone dies and a disclosing agent to improve marginal fit discrepancy. MATERIAL AND METHODS: Thirty-two nickel-chromium copings were fabricated and simulated standard clinical and laboratory procedures with 2 variables: tooth preparation convergence angles of 6 and 18 degrees, with or without internal relief. Master stone dies and their duplicates were selected for coping construction and internal adjustment, respectively. A specimen positioning device was coupled with a Toolmakers microscope to allow reproducibility of measurements. Each coping was evaluated at 8 locations of its marginal perimeter, before and after internal adjustment. RESULTS: Marginal fit discrepancy of copings were significantly reduced with an internal adjustment technique (mean > 52%) for all experimental groups. Tooth preparations with greater convergence and internally relieved castings recorded a better marginal fit. CONCLUSION: The casting internal adjustment technique with use of duplicated stone dies and a disclosing agent substantially reduced marginal fit discrepancy.

Analysis of Variance↗
PubMedDate not supplied

Effect of the surface treatment of plain carbon fiber posts on the retention of the composite core: an in vitro evaluation.

This study aims to evaluate the role of surface treatments performed on plain carbon fiber posts, in relation to serrated carbon fiber posts, in the retention of the composite core. Fifty carbon fiber posts received surface treatments in order to verify their influence on the retention of the core material. An acrylic resin mold was developed in order to precisely fit the post, leaving a machined space to accommodate a self-curing composite resin. After the surface treatment, a primer was applied on the coronal portion of all posts, which were then dried. They were fitted to the mold and received a 3 mm composite core. All specimens were thermocycled and then stored in distilled water for a week. Tension test was performed at a speed of 0.5 mm/min until there was lack of adhesion or fracture of the core. The conclusions were: a) the values of retention related to aluminum oxide spray (group A), depth cutter diamond burs (group C) and posts with machined coronal portion (group D) were comparable to those of serrated posts (group E), although no statistically significant difference between these groups was found; b) the mean values of core retention in group B (medium grit diamond burs) were statistically lower than those of other groups.

Carbon↗
PubMedDate not supplied

Aesthetic posts and cores for metal-free restoration of endodontically treated teeth.

Utilization of contemporary post and core systems has facilitated the aesthetic restoration of endodontically treated teeth. Light transmission and biocompatibility have been enhanced by the introduction of metal-free post systems. The periodontal and endodontic status, root length, and histological structure of the devitalized teeth must be considered in order to achieve successful restoration following endodontic treatment. This article presents various restorative criteria for the aesthetic placement and buildup of post and core materials, as well as the preservation of maximum coronal and root structure.

Biocompatible Materials↗