PubMed HealthSearch

Biomedical subjects

M A Gorycki

Publications and source records attributed to M A Gorycki.

8 recordsLinked to original sources

A simple method for handling grids.

A simple method for handling electron microscope grids is described here. While assuring their identification and safety, this method provides improved handling, temporary storage, and identification of grids bearing ultra-thin sections, and in addition, provides a novel method for preparing bulk samples. Grids are attached at their edges to the weakly adhesive surface of a "Post-it" note pad which sits in a petri dish. The grids are safely immobilized on the pad, classified based on their location, and identified by convenient pad notation. Grid manipulation and identification are simplified using this device, which is easily assembled from readily available and inexpensive materials.

Microscopy, Electron

An efficient staining method for ultrathin sections.

A staining method to handle simultaneously as many as 20 electron microscope grids is described. The devices used are easily constructed of readily obtained inexpensive materials. The volumes of stain and wash water required are very small and drying grids is simplified.

Specimen Handling

Methods for precisely trimming block faces for ultramicrotomy.

Two devices are described to aid in trimming block faces of embedded tissue for ultramicrotomy. The first, a reticle to fit the ocular of a stereomicroscope, can be manufactured by the ultramicrotomist and is designed to outline the edges of the block face so that it can be trimmed to a standard size and shape with the area of interest centered in it. The second, a rectangular "trimalign" block mounted in the knife holder of the ultramicrotome, is, with the block face, aligned to the plane of sectioning, and aids in retrimming the top and bottom edges of the block face. This is the simplest trimming device yet described and the first which will, from any sort of embedded material, produce a block face with parallel top and bottom edges even if the block face is not perpendicular to the axis of the specimen holder. If the edge of the diamond knife used for sectioning is parallel to the axis of rotation of the knife holder, the block face has also been automatically aligned to the kinfe as a consequence of this aligning and trimming procedure. As a result, sectioning can begin immediately without further adjustments.

Microtomy

Improved technique for electron microscopy of cultured cells.

A number of techniques are presented which precise selection and efficient preparation of individual cultured cells for electron microscopy. Techniques described include marking of the living and embedded cells, drilling and mounting cores of embedded material, and improved technique for marking of the selected area on the block face before trimming.

Cells, Cultured

Simple and rapid block face alignment methods for the ultramicrotome.

Light from the fluorescent lamp on an ultramicrotome can be reflected from a mirror located beneath the knife face so that the knife and edge can be imaged on the block face. It is well known that this image can be used to accurately align the block face to the knife edge and cutting direction. A method is described of pre-aligning the lamp, stereomicroscope, knife, and the mirror, which is fixed with respect to the knife face, so that a bright reflection of the knife face on the block face is obtained only when the block face is brought close to alignment. This initial alignment is an extremely rapid procedure, and is followed by slower, more accurate manipulation of the block and knife for precise alignment. The mirror, easily mounted to a Porter-Blum MT-2 ultramicrotome knife holder, is very simple in design and readily adaptable to any ultramicrotome. Methods to permit small movements of the block for the MT-1 and MT-2 ultramicrotomes are also described.

Microtomy