PubMed Health⌕ Search

Biomedical subjects

M A Hemminga

Publications and source records attributed to M A Hemminga.

At least 19 recordsLinked to original sources

Membrane-anchoring interactions of M13 major coat protein.

The response to hydrophobic mismatch of membrane-bound M13 major coat protein is measured using site-directed fluorescence and ESR spectroscopy. For this purpose, we investigate the membrane-anchoring interactions of M13 coat protein in model systems consisting of phosphatidylcholine bilayers that vary in hydrophobic thickness. Mutant coat proteins are prepared with an AEDANS-labeled single cysteine residue in the hinge region of the protein or at the C-terminal side of the transmembrane helix. In addition, the fluorescence of the tryptophan residue is studied as a monitor for the N-terminal side of the transmembrane helix. The fluorescence results show that the hinge region and C-terminal side of the transmembrane helix hardly respond to hydrophobic mismatch. In contrast, the N-terminal side of the helical transmembrane domain shifts to a more apolar environment, when the hydrophobic thickness is increased. The apparent strong membrane-anchoring interactions of the C-terminus are confirmed using a mutant that contains a longer transmembrane domain. As a result of this mutation, the tryptophan residue at the N-terminal side of the helical domain clearly shifts to a more polar environment, whereas the labeled position 46 at the C-terminal side is not affected. The phenylalanines in the C-terminal part of the protein play an important role in these apparent strong anchoring interactions. This is demonstrated with a mutant in which both phenylalanines are replaced by alanine residues. The phenylalanine residues in the C-terminus affect the location in the membrane of the entire transmembrane domain of the protein.

Amino Acid Sequence↗

Configurations of the N-terminal amphipathic domain of the membrane-bound M13 major coat protein.

The M13 major coat protein has been extensively studied in detergent-based and phospholipid model systems to elucidate its structure. This resulted in an L-shaped model structure of the protein in membranes. An amphipathic alpha-helical N-terminal arm, which is parallel to the surface of the membrane, is connected via a flexible linker to an alpha-helical transmembrane domain. In the present study, a fluorescence polarity probe or ESR spin probe is attached to the SH group of a series of N-terminal single cysteine mutants, which were reconstituted into DOPC model membranes. With ESR spectroscopy, we measured the local mobility of N-terminal positions of the protein in the membrane. This is supplemented with relative depth measurements at these positions by fluorescence spectroscopy via the wavelength of maximum emission and fluorescence quenching. Results show the existence of at least two possible configurations of the M13 amphipathic N-terminal arm on the ESR time scale. The arm is bound either to the membrane surface or in the water phase. The removal or addition of a hydrophobic membrane-anchor by site-specific mutagenesis changes the ratio between the membrane-bound and the water phase fraction.

Amino Acid Sequence↗

Conformation and orientation of the gene 9 minor coat protein of bacteriophage M13 in phospholipid bilayers.

The membrane-bound state of the gene 9 minor coat protein of bacteriophage M13 was studied in model membrane systems, which varied in lipid head group and lipid acyl chain composition. By using FTIR spectroscopy and subsequent band analysis a quantitative analysis of the secondary structure of the protein was obtained. The secondary structure of the gene 9 protein predominantly consists of alpha-helical (67%) and turn (33%) structures. The turn structure is likely to be located C-terminally where it has a function in recognizing the phage DNA during bacteriophage assembly. Attenuated total reflection FTIR spectroscopy was used to determine the orientation of gene 9 protein in the membrane, revealing that the alpha-helical domain is mainly transmembrane. The conformational and orientational measurements result in two models for the gene 9 protein in the membrane: a single transmembrane helix model and a two-helix model consisting of a 15 amino acid long transmembrane helix and a 10 amino acid long helix oriented parallel to the membrane plane. Potential structural consequences for both models are discussed.

Amino Acid Sequence↗

Spontaneous insertion of gene 9 minor coat protein of bacteriophage M13 in model membranes.

Gene 9 minor coat protein from bacteriophage M13 is known to be located in the inner membrane after phage infection of Escherichia coli. The way of insertion of this small protein (32 amino acids) into membranes is still unknown. Here we show that the protein is able to insert in monolayers. The limiting surface pressure of 35 mN/m for 1,2-dioleoyl-sn-glycero-3-phosphocholine and 1,2-dioleoyl-sn-glycero-3-phosphoglycerol lipid systems indicates that this spontaneous insertion can also occur in vivo. By carboxyfluorescein leakage experiments of vesicles it is demonstrated that protein monomers, or at least small aggregates, are more effective in releasing carboxyfluorescein than highly aggregated protein. The final orientation of the protein in the bilayer after insertion was addressed by proteinase K digestion, thereby making use of the unique C-terminal location of the antigenic binding site. After insertion the C-terminus is still available for the enzymatic digestion, while the N-terminus is not. This leads to the overall conclusion that the protein is able to insert spontaneously into membranes without the need of any machinery or transmembrane gradient, with the positively charged C-terminus remaining on the outside. The orientation after insertion of gene 9 protein is in agreement with the 'positive inside rule'.

Bacteriophage M13↗

Introduction.

Explore the source record for details and available documents.

Journal Article↗

Constrained modeling of spin-labeled major coat protein mutants from M13 bacteriophage in a phospholipid bilayer.

The family of three-dimensional molecular structures of the major coat protein from the M13 bacteriophage, which was determined in detergent micelles by NMR methods, has been analyzed by constrained geometry optimization in a phospholipid environment. A single-layer solvation shell of dioleoyl phosphatidylcholine lipids was built around the protein, after replacing single residues by cysteines with a covalently attached maleimide spin label. Both the residues substituted and the phospholipid were chosen for comparison with site-directed spin labeling EPR measurements of distance and local mobility made previously on membranous assemblies of the M13 coat protein purified from viable mutants. The main criteria for identifying promising candidate structures, out of the 300 single-residue mutant models generated for the membranous state, were 1) lack of steric conflicts with the phospholipid bilayer, 2) good match of the positions of spin-labeled residues along the membrane normal with EPR measurements, and 3) a good match between the sequence profiles of local rotational freedom and a structural restriction parameter for the spin-labeled residues obtained from the model. A single subclass of structure has been identified that best satisfies these criteria simultaneously. The model presented here is useful for the interpretation of future experimental data on membranous M13 coat protein systems. It is also a good starting point for full-scale molecular dynamics simulations and for the design of further site-specific spectroscopic experiments.

Amino Acid Substitution↗

Localization and rearrangement modulation of the N-terminal arm of the membrane-bound major coat protein of bacteriophage M13.

During infection the major coat protein of the filamentous bacteriophage M13 is in the cytoplasmic membrane of the host Escherichia coli. This study focuses on the configurational properties of the N-terminal part of the coat protein in the membrane-bound state. For this purpose X-Cys substitutions are generated at coat protein positions 3, 7, 9, 10, 11, 12, 13, 14, 15, 17, 19, 21, 22, 23 and 24, covering the N-terminal protein part. All coat protein mutants used are successfully produced in mg quantities by overexpression in E. coli. Mutant coat proteins are labeled and reconstituted into mixed bilayers of phospholipids. Information about the polarity of the local environment around the labeled sites is deduced from the wavelength of maximum emission using AEDANS attached to the SH groups of the cysteines as a fluorescent probe. Additional information is obtained by determining the accessibility of the fluorescence quenchers acrylamide and 5-doxyl stearic acid. By employing uniform coat protein surroundings provided by TFE and SDS, local effects of the backbone of the coat proteins or polarity of the residues could be excluded. Our data suggest that at a lipid to protein ratio around 100, the N-terminal arm of the protein gradually enters the membrane from residue 3 towards residue 19. The hinge region (residues 17-24), connecting the helical parts of the coat protein, is found to be more embedded in the membrane. Substitution of one or more of the membrane-anchoring amino acid residues lysine 8, phenylalanine 11 and leucine 14, results in a rearrangement of the N-terminal protein part into a more extended conformation. The N-terminal arm can also be forced in this conformation by allowing less space per coat protein at the membrane surface by decreasing the lipid to protein ratio. The influence of the phospholipid headgroup composition on the rearrangement of the N-terminal part of the protein is found to be negligible within the range thought to be relevant in vivo. From our experiments we conclude that membrane-anchoring and space-limiting effects are key factors for the structural rearrangement of the N-terminal protein part of the coat protein in the membrane.

Acrylamide↗

Membrane assembly of the bacteriophage Pf3 major coat protein.

The Pf3 major coat protein of the Pf3 bacteriophage is stored in the inner membrane of the infected cell during the reproductive cycle. The protein consists of 44 amino acids, and contains an acidic amphipathic N-terminal domain, a hydrophobic domain, and a short basic C-terminal domain. The mainly alpha-helical membrane-bound protein traverses the membrane once, leaving the C-terminus in the cytoplasm and the N-terminus in the periplasm. A cysteine-scanning approach was followed to measure which part of the membrane-bound Pf3 protein is inside or outside the membrane. In this approach, the fluorescence probe N-[(iodoacetyl)amino]ethyl-1-sulfonaphthylamine (IAEDANS) was attached to single-cysteine mutants of the Pf3 coat protein. The labeled mutant coat proteins were reconstituted into the phospholipid DOPC/DOPG (80/20 molar ratio) and DOPE/DOPG (80/20 molar ratio) model membranes. We subsequently studied the fluorescence characteristics at the different positions in the protein. We measured the local polarity of the environment of the probe, as well as the accessibility of the probe to the fluorescence quencher acrylamide. The results of this study show a single membrane-spanning protein with both the C- and N-termini remaining close to the surface of the membrane. A nearly identical result was seen previously for the membrane-bound M13 coat protein. On the basis of a comparison between the results from both studies, we suggest an "L-shaped" membrane-bound model for the Pf3 coat protein. DOPE-containing model membranes revealed a higher polarity, and quenching efficiency at the membrane/water interface. Furthermore, from the outside to the inside of the membrane, a steeper polarity gradient was measured at the PE/PG interface as compared to the PC/PG interface. These results suggest a thinner interface for DOPE/DOPG than for DOPC/DOPG membranes.

Amino Acid Sequence↗

Molecular mobility in the cytoplasm: an approach to describe and predict lifespan of dry germplasm.

Molecular mobility is increasingly considered a key factor influencing storage stability of biomolecular substances, because it is thought to control the rate of detrimental reactions responsible for reducing the shelf life of, for instance, pharmaceuticals, food, and germplasm. We investigated the relationship between aging rates of germplasm and the rotational motion of a polar spin probe in the cytoplasm under different storage conditions using saturation transfer electron paramagnetic resonance spectroscopy. Rotational motion of the spin probe in the cytoplasm of seed and pollen of various plant species changed as a function of moisture content and temperature in a manner similar to aging rates or longevity. A linear relationship was established between the logarithms of rotational motion and aging rates or longevity. This linearity suggests that detrimental aging rates are associated with molecular mobility in the cytoplasm. By measuring the rotational correlation times at low temperatures at which experimental determination of longevity is practically impossible, this linearity enabled us to predict vigor loss or longevity. At subzero temperatures, moisture contents for maximum life span were predicted to be higher than those hitherto used in genebanks, urging for a reexamination of seed storage protocols.

Cytoplasm↗

High critical temperature above T(g) may contribute to the stability of biological systems.

In this study, we characterized the molecular mobility around T(g) in sugars, poly-L-lysine and dry desiccation-tolerant biological systems, using ST-EPR, (1)H-NMR, and FTIR spectroscopy, to understand the nature and composition of biological glasses. Two distinct changes in the temperature dependence of the rotational correlation time (tau(R)) of the spin probe 3-carboxy-proxyl or the second moment (M(2)) were measured in sugars and poly-L-lysine. With heating, the first change was associated with the melting of the glassy state (T(g)). The second change (T(c)), at which tau(R) abruptly decreased over several orders of magnitude, was found to correspond with the so-called cross-over temperature, where the dynamics changed from solid-like to liquid-like. The temperature interval between T(g) and T(c) increased in the order of sucrose < trehalose < raffinose </= staychose < poly-L-lysine < biological tissues, from 17 to >50 degrees C, implying that the stability above T(g) improved in the same order. These differences in temperature-dependent mobilities above T(g) suggest that proteins rather than sugars play an important role in the intracellular glass formation. The exceptionally high T(c) of intracellular glasses is expected to provide excellent long-term stability to dry organisms, maintaining a slow molecular motion in the cytoplasm even at temperatures far above T(g).

Carbohydrates↗

Is there a role for oligosaccharides in seed longevity? An assessment of intracellular glass stability.

We examined whether oligosaccharides extend seed longevity by increasing the intracellular glass stability. For that purpose, we used a spin probe technique to measure the molecular mobility and glass transition temperature of the cytoplasm of impatiens (Impatiens walleriana) and bell pepper (Capsicum annuum) seeds that were osmo-primed to change oligosaccharide content and longevity. Using saturation transfer electron paramagnetic resonance spectroscopy, we found that the rotational correlation time of the polar spin probe 3-carboxy-proxyl in the cytoplasm decreased, together with longevity, as a function of increasing seed water content, suggesting that longevity may indeed be regulated by cytoplasmic mobility. Osmo-priming of the seeds resulted in considerable decreases in longevity and oligosaccharide content, while the sucrose content increased. No difference in the glass transition temperature was found between control and primed impatiens seeds at the same temperature and water content. Similarly, there was no difference in the rotational motion of the spin probe in the cytoplasm between control and primed impatiens and bell pepper seeds. We therefore conclude that oligosaccharides in seeds do not affect the stability of the intracellular glassy state, and that the reduced longevity after priming is not the result of increased molecular mobility in the cytoplasm.

Oligosaccharides↗

Conformational and aggregational properties of the gene 9 minor coat protein of bacteriophage M13 in membrane-mimicking systems.

The membrane-bound state of the gene 9 minor coat protein of bacteriophage M13 was studied in various membrane-mimicking systems, including organic solvents, detergent micelles, and phospholipid bilayers. For this purpose we determined the conformational and aggregational properties of the chemically synthesized protein by CD, FTIR, and HPSEC. The protein appears to be in a monomeric or small oligomeric alpha-helical state in TFE but adopts a mixture of alpha-helical and random structure after subsequent incorporation into SDS or DOPG. When solubilized by sodium cholate, however, the protein undergoes a transition in time into large aggregates, which contain mainly beta-sheet conformation. The rate of this beta-polymerization process was decreased at lower temperature and higher concentrations of sodium cholate. This aggregation was reversed only upon addition of high concentrations of the strong detergent SDS. By reconstitution of the cholate-solubilized protein into DOPG, it was found that the state of the protein, whether initially alpha-helical monomeric/oligomeric or beta-sheet aggregate, did not change. On the basis of our results, we propose that the principal conformational state of membrane-bound gene 9 protein in vivo is alpha-helical.

Amino Acid Sequence↗

Characterization of molecular mobility in seed tissues: an electron paramagnetic resonance spin probe study.

The relationship between molecular mobility (tauR) of the polar spin probe 3-carboxy-proxyl and water content and temperature was established in pea axes by electron paramagnetic resonance (EPR) and saturation transfer EPR. At room temperature, tauR increased during drying from 10(-11) s at 2.0 g water/g dry weight to 10(-4) s in the dry state. At water contents below 0.07 g water/g dry weight, tauR remained constant upon further drying. At the glass transition temperature, tauR was constant at approximately 10(-4) s for all water contents studied. Above Tg, isomobility lines were found that were approximately parallel to the Tg curve. The temperature dependence of tauR at all water contents studied followed Arrhenius behavior, with a break at Tg. Above Tg the activation energy for rotational motion was approximately 25 kJ/mol compared to 10 kJ/mol below Tg. The temperature dependence of tauR could also be described by the WLF equation, using constants deviating considerably from the universal constants. The temperature effect on tauR above Tg was much smaller in pea axes, as found previously for sugar and polymer glasses. Thus, although glasses are present in seeds, the melting of the glass by raising the temperature will cause only a moderate increase in molecular mobility in the cytoplasm as compared to a huge increase in amorphous sugars.

Biophysical Phenomena↗

NMR study on the binding of d(GGAAATTTCC)2 with a positively charged pentacosapeptide.

To obtain a better understanding of the electrostatic nature of protein-nucleic acid interactions, we have investigated the interaction of a double-stranded decamer d(GGAAATTTCC)2 with a synthetic arginine and lysine-rich pentacosapeptide (Pep25), using NMR and optical spectroscopy. The chemical shift data of the decamer under various experimental conditions show that the binding of Pep25 changes the conformation of the decamer in a different way, as compared to the conformational changes induced by a variation in temperature or ionic strength. The chemical shift results are interpreted in terms of ring current effects that emerge into a model for the conformational change, in which the double-stranded helix of the decamer undergoes a decrease of twist and rise to accommodate Pep25. The binding results indicate that the positively charged arginine and lysine side chains of Pep25 not only have a stabilising electrostatic interaction with the negatively charged backbone phosphates of d(GGAAATTTCC)2, but also that a stabilisation of the base pairs of d(GGAAATTTCC)2 by Pep25 takes place.

Amino Acid Sequence↗

Mimicking initial interactions of bacteriophage M13 coat protein disassembly in model membrane systems.

The structure and changes in environment of the M13 major coat protein were studied in model systems, mimicking the initial molecular process of the phage disassembly. For this purpose we have systematically studied protein associations with various detergents and lipids in two different coat protein assemblies: phage particles and S-forms. It is remarkable that the major coat protein can change its conformation to accommodate three distinctly different environments: phage filament, S-form, and membrane-bound form. The structural and environmental changes during this protein transformations were studied by site-directed spin labeling, fluorescence labeling, and CD spectroscopy in different membrane model systems. The phage particles were disrupted only by strong ionic detergents [sodium dodecyl sulfate (SDS) and cetyltrimethylammonium bromide and (CTAB)] but were not affected by sodium cholate and sodium deoxycholate, nonionic detergents, and dilauroyl-l-alpha-phosphatidylcholine (DLPC) lipid bilayers. Conversion of the phage particles into S-forms by addition of chloroform rendered the coat protein accessible for the association with different ionic and nonionic detergents, as well as DLPC lipids. The disruption of the S-form by all detergents studied was instantaneous but was slower with DLPC vesicles. Only small unilamellar vesicles effectively solubilized the S-form. The data suggest that the viral protein coat is inherently unstable when the major coat protein is exposed to amphiphilic molecules. During conversion from the phage to the S-form, and subsequently to the membrane-bound form, the coat protein undergoes pronounced changes in environment, and in response the alpha-helix content decreases and the local protein structure changes dramatically. This adaptation of the protein conformation enables a stable association of the protein with the membrane.

Bacteriophage M13↗

Nuclear magnetic resonance in environmental engineering: principles and applications.

This paper gives an introduction to nuclear magnetic resonance spectroscopy (NMR) and magnetic resonance imaging (MRI) in relation to applications in the field of environmental science and engineering. The underlying principles of high resolution solution and solid state NMR, relaxation time measurements and imaging are presented. Then, the use of NMR is illustrated and reviewed in studies of biodegradation and biotransformation of soluble and solid organic matter, removal of nutrients and xenobiotics, fate of heavy metal ions, and transport processes in bioreactor systems.

Biodegradation, Environmental↗

In situ aggregational state of M13 bacteriophage major coat protein in sodium cholate and lipid bilayers.

The in situ aggregational behavior of the bacteriophage M13 major coat protein was determined for the protein isolated in sodium cholate and reconstituted into DOPC lipid bilayers. For this purpose, the cysteine mutants A49C and T36C of the major coat protein were labeled with either a maleimido spin-label or a fluorescence label (IAEDANS). The steric restrictions sensed by the spin-label were used to evaluate the local protein conformation and the extent of protein-protein interactions at the position of the labeled residue. In addition, fluorescent labels covalently attached to the protein were used to determine the polarity of the local environment. The labeled coat protein mutants were examined under different conditions of protein association (amphiphile environment, ionic strength, temperature, and pH). The aggregational state of the major coat protein solubilized from the phage particle in sodium cholate was not dependent on the ionic strength, but was strongly dependent on cholate concentration and pH during sample preparation. At pH 7.0 and high sodium cholate concentration, the protein was in a dimeric form. The unusually strong association properties of the protein dimer in sodium cholate at pH 7.0 were attributed to the inability of sodium cholate to disrupt the strong hydrophobic forces between neighboring protein subunits in the phage particle. Such a "structural protein dimer" was, however, completely and irreversibly disrupted at pH 10.0. Qualitatively the same aggregational tendency was found upon changing the pH for the coat protein reconstituted in DOPC lipid bilayers. This reveals that the dimer disruption process is primarily a protein property, because there are no titratable groups on DOPC in the experimental pH range. The results are interpreted in terms of a model relating the protein aggregational state in the assembled phage to the protein aggregational behavior in sodium cholate and lipid bilayers.

Bacteriophage M13↗