PubMed Health⌕ Search

Biomedical subjects

M A Vargas

Publications and source records attributed to M A Vargas.

At least 19 recordsLinked to original sources
PubMed2003

Accumulation of astaxanthin and lutein in Chlorella zofingiensis (Chlorophyta).

When grown photoautotrophically, Chlorella zofingiensis strain CCAP 211/14 accumulates a significant amount of valuable carotenoids, namely astaxanthin and lutein, of increasing demand for use as feed additives in fish and poultry farming, as colorants in food, and in health care products. Under standard batch-culture conditions, this microalgal strain exhibits high values of both growth rate (about 0.04 h(-1)) and standing cell population (over 10(11) cells l(-1), or 7 g dry weight l(-1)). Lutein, in a free (unesterified) form, was the prevalent carotenoid during early stages of cultivation (over 0.3 pg cell(-1), equal to 4 mg g(-1) dry weight, or 20 mg l(-1) culture), whereas esterified astaxanthin accumulated progressively, to reach a maximum (over 0.1 pg cell(-1), equal to 1.5 mg g(-1) dry weight, or 15 mg l(-1) culture) in the late stationary phase. A differential response of lutein and astaxanthin accumulation was also recorded with regard to the action of some environmental and nutritional factors. C. zofingiensis CCAP 211/14 represents a unique model system for analyzing the differential regulation of the levels of primary (lutein) and secondary (astaxanthin) carotenoids. Relevant also from the biotechnological viewpoint, this photosynthetic organism, with outstanding attributes for fast photosynthetic growth and carotenoid accumulation, might prove most valuable for its application to the mass production of either or both lutein and astaxanthin.

Chlorella↗
PubMed2002

Thyrotropin-releasing hormone-induced down-regulation of pyroglutamyl aminopeptidase II activity involves L-type calcium channels and cam kinase activities in cultures of adenohypophyseal cells.

Released thyrotropin-releasing hormone (TRH) is inactivated by a narrow specificity ectopeptidase, pyroglutamyl aminopeptidase II (PPII), present in brain and lactotrophs. Various hypothalamic/paracrine factors, including TRH, slowly (in hours) regulate the activity of PPII on the surface of adenohypophyseal cells. TRH-induced down-regulation was mimicked by protein kinase C (PKC) activation but was not affected by inhibition of PKC. Adenylate cyclase activation can also down-regulate PPII. The purpose of this study was to identify elements of the transduction pathway used by TRH to regulate PPII activity. In primary cultures of female adenohypophyseal cells, activation of the stimulatory G protein or adenylate cyclase produced an effect additive to that of TRH; inhibition of protein kinase A activity did not interfere with TRH action. However, regulation of PPII activity by TRH was inhibited by a phospholipase C beta inhibitor or chelation of intracellular calcium. L-type calcium channels (LCC) agonists mimicked TRH action and their effect was not additive with that of TRH. Antagonists of LCC channels and inhibitors of calmodulin or calcium/calmodulin-dependent protein kinase blocked TRH action. Therefore, TRH-induced calcium entry through L-type calcium channels and the activity of calcium/calmodulin-dependent protein kinase are required for TRH effect on PPII activity in primary cultures of adenohypophyseal cells. This pathway may coregulate PPII and prolactin biosynthesis in response to TRH.

Adenylyl Cyclases↗
PubMed2001

Lutein production by Muriellopsis sp. in an outdoor tubular photobioreactor.

The effect of dilution rate, mixing and daily solar cycles on lutein and biomass productivity of the green unicellular alga Muriellopsis sp. has been studied, throughout the year, in an outdoor tubular photobioreactor. Highest productivity values, for both lutein (about 180 mg m(-2) per day) and biomass (about 40 g (dry weight) m(-2) per day) were achieved on May and July. Values for the optimal dilution rate varied, being lower in May (0.06 h(-1)) than in November (0.09 h(-1)). Similar values for photosynthetic efficiency (about 4%) were recorded throughout the year, indicating that optimization of culture conditions was achieved for each experimental period. Along the daily solar cycle, there was a fast increase of lutein content of Muriellopsis sp. in response to irradiance during the early hours of daytime, with maximal lutein content (about 6 mg (g dry weight)(-1)) being recorded at noon, and decreasing slowly, thereafter. An increase in cell growth was observed following the establishment of maximum lutein/chlorophyll ratio, which might indicate a role for lutein in protecting cells from photodamage.

Biomass↗
PubMed2001

Association between microtensile bond strength and leakage in the indirect resin composite/dentin adhesively bonded joint.

PURPOSE: Develop a methodology to correlate microtensile bond strength (microTBS) and leakage within the same site of a specimen and evaluate the predominate debond and leakage pathways. MATERIALS AND METHODS: A Class II (MO) slot cavity was prepared in 37 extracted human molars and restored with indirect resin composite restorations. The restored teeth were thermocycled 300X between 5 and 55 degrees C and then stained with silver. Two specimens per tooth were obtained by diamond saw sectioning for measurement of leakage (microm) and microtensile bond strength (MPa) at the gingival wall and then tested for association with regression analysis. Scanning electron microscopy techniques and energy dispersive spectroscopy (EDS) were used to evaluate the debond and leakage pathways. RESULTS: Association between leakage and bond strength was not significant (t=1.31, p=0.198). All 74 samples debonded within the joint, predominantly at the hybrid layer-adhesive resin region with only one specimen including a small portion of resin cement in the debond pathway. Secondary and backscatter imaging and EDS analysis showed leakage in all samples that involved the hybrid layer. CONCLUSION: This study demonstrates a feasible method for evaluating leakage and bond strength at the joint interface within the same specimen.

Composite Resins↗
PubMed2001

Early detection of maedi-visna (ovine progressive pneumonia) virus seroconversion in field sheep samples.

The aim of this work was to investigate whether an enzyme-linked immunosorbent assay (ELISA) was useful for early detection of maedi-visna virus (MVV) infection in sheep under field conditions. An ELISA based on p25 recombinant protein and a gp46 synthetic peptide was used. Sequentially obtained serum samples (n = 1,941) were studied for 4 years. ELISA results were compared with those of the agar gel immunodiffusion (AGID) test, and results of both tests were compared with a reference result established using consensus scores for at least 2 of 3 serologic techniques (AGID, ELISA, and western blotting, which was used to resolve result discrepancies between the other 2 techniques). A total of 247 discrepancies were observed between ELISA and AGID. Of these, 131 were due to an earlier detection of 120 sera by the ELISA and 11 sera by AGID. The remaining discrepancies (116) were due to the presence of false reactions in both tests. Fewer false-negative results were found by ELISA than with AGID (6 vs. 69 sera, respectively), whereas the number of false-positive results was virtually the same for ELISA and AGID (21 vs. 20, respectively). In relation to the reference result, ELISA sensitivity and specificity were 97.8% and 98.2%, respectively, whereas values for AGID were 76.3% and 98.3%, respectively. The agreement between ELISA and the reference result was higher than that between AGID and the reference result (K value: 0.96 and 0.77, respectively). A variation in the ELISA signal (based on optical density) was observed during the study period, suggesting different antibody levels throughout the animal's life. The ELISA was useful for detecting MVV-infected sheep in field conditions and has potential for use in control and eradication programs.

Animals↗
PubMed2001

Cavity preparation devices: effect on microleakage of Class V resin-based composite restorations.

PURPOSE: To evaluate the effect of cavity preparation device (i.e. carbide bur, diamond bur, air abrasive, Sonicsys, and Er:YAG laser) on microleakage of Class V resin-based composite (RBC) restorations, the tooth restoration interface and dentin ultrastructure. MATERIALS AND METHODS: Eight groups (n=18) of 9 human molars each were prepared on the buccal and lingual surfaces for Class V RBC restorations using five preparation devices: Group 1: carbide bur #8 round; Group 2: diamond bur #801; Group 3: KCP 1000 air abrasion unit; Group 4: Sonicsys Approx.; Group 5: Er:YAG laser; Group 6: carbide bur plus air abrasive; Group 7: carbide bur plus laser, and Group 8: laser without etching. Circular cavity preparations, 3 mm diameter and 1.5 mm deep, were cut at the CEJ on the buccal and lingual surfaces of each tooth. A bevel was placed on the enamel margin. All cavities were restored using Single Bond adhesive system and Silux Plus according to manufacturer's directions, with the exception that no etchant was used with Group 8. After thermocycling, specimens were tested for microleakage using silver nitrate methodology. Dye penetration data was collected and subjected to non-parametric statistical analysis. SEM analysis of the dentin-RBC interface, as well as the effect of each cavity preparation device on the surface of dentin was performed. RESULTS: Microleakage did not occur in enamel for any method of cavity preparation when the enamel was etched prior to adhesive application. Kruskal-Wallis One-way ANOVA revealed differences in dentin microleakage among the tested groups at alpha=0.05. Mann-Whitney Test for Paired Comparisons at alpha=0.01 demonstrated significantly greater dentin microleakage in Groups 5 and 7 compared to all groups except Group 3 (air abrasive). Although Group 8 had the least microleakage in dentin, this was not significantly different from Groups 1, 2, 4 and 6. SEM observation revealed hybridization at the dentin-resin interface for all groups except for Group 8 (laser prepared, non-etched). Surface analysis showed differences related to the operating mode of each preparation device. CLINICAL SIGNIFICANCE: The method of cavity preparation did not affect microleakage in etched enamel. When using a laser for cavity preparation, enamel should be etched although not etching dentin may help to improve marginal seal.

Acid Etching, Dental↗
PubMed2001

Microtensile bond strength of eleven contemporary adhesives to dentin.

PURPOSE: To evaluate the microtensile bond strength (microTBS) of eleven contemporary adhesives to dentin, including three one-step self-etch systems, four two-step self-etch systems, three two-step total-etch systems, and one three-step total-etch system. MATERIALS AND METHODS: Resin composite (Z100) was bonded to flat, mid-coronal dentin from 33 extracted human third molars using the adhesives strictly according to the respective manufacturer's instructions. After storage overnight in 37 degrees C water, the bonded specimens were sectioned into 3 to 6 slabs of approximately 1 mm thickness and 2.5 mm width. They were then trimmed into an hourglass shape resulting in an interface area of approximately 1 mm2, and subsequently subjected to microTBS testing with a crosshead speed of 1 mm/min. RESULTS: The microTBS varied from 30.0 MPa for the one-step self-etch adhesive Prompt L-Pop 2 (ESPE) to 63.1 MPa for the three-step total-etch adhesive OptiBond FL (Kerr), the latter being the only one that significantly differed from all other microTBS values. Although not significantly different, one-step self-etch adhesives tended to have lower microTBS than two-step self-etch and two-step total-etch adhesives. Specimen failures during sample preparation occurred with Prompt L-Pop 2 (4 pretesting failures out of 17 specimens) and NRC/Prime & Bond NT (7 pretesting failures out of 14 specimens). CONCLUSION: Adhesives with simplified application procedures, either following a total-etch or self-etch approach, produced lower bond strengths to dentin than a conventional three-step total-etch adhesive. Some concern exists regarding the consistency in bonding effectiveness to dentin of some self-etch adhesives.

Acid Etching, Dental↗
PubMed2000

Chemical and rheological properties of an extracellular polysaccharide produced by the cyanobacterium Anabaena sp. ATCC 33047.

The cyanobacterium (blue-green alga) Anabaena sp. ATCC 33047 produces an exopolysaccharide (EPS) during the stationary growth phase in batch culture. Chemical analysis of EPS revealed a heteropolysaccharidic nature, with xylose, glucose, galactose, and mannose the main neutral sugars found. The infrared (IR) spectrum of EPS showed absorption bands of carboxylate groups. The average molecular mass of the polymer was 1.35 MDa. Aqueous dispersions at EPS concentrations ranging from 0.2% to 0.6% (w/w) showed marked shear-thinning properties (power-law behavior). Linear dynamic viscoelastic properties showed that the elastic component was always higher than the viscous component. Viscous and viscoelastic properties demonstrated the absence of conformational changes within the concentration range studied. Stress-growth experiments revealed that 0.4% and 0.6% (w/w) EPS dispersions showed thixotropic properties. A detailed comparison of the linear dynamic viscoelasticity, transient flow, and decreasing shear rate flow curve properties was made for 0.4% (w/w) dispersions of xanthan gum (XG), Alkemir 110 (AG), and EPS. Viscoelastic spectra demonstrated that the EPS dispersion turned out to be more "fluidlike" than the AG and XG dispersions. The flow indexes indicated that the EPS dispersion was less shear-sensitive than that of XG, showing essentially the same viscosity, that is, >50 s(-1). The fact that viscosities of EPS and AG dispersions were not substantially different within the shear-rate range covered must be emphasized, in relation to EPS potential applications. The rheological behavior of EPS dispersions indicates the formation of an intermediate structure between a random-coil polysaccharide and a weak gel.

Anabaena↗
PubMed2000

Carotenoid content of chlorophycean microalgae: factors determining lutein accumulation in Muriellopsis sp. (Chlorophyta).

Fifteen strains of chlorophycean microalgae have been investigated with regard to their carotenoid profile. Lutein, beta-carotene and violaxanthin were present in virtually all of the strains, lutein, in general, being the most abundant carotenoid, whereas canthaxanthin and astaxanthin were found in some strains only. Chlorella fusca SAG 211-8b, Chlorococcum citriforme SAG 62.80, Muriellopsis sp., Neospongiococcum gelatinosum SAG B 64.80 and Chlorella zofingiensis CCAP 211/14 exhibited high lutein levels, the latter strain containing in addition substantial amounts of astaxanthin. Muriellopsis sp. was further characterized, since besides a high lutein content (up to 35 mg l(-1) culture), it had the highest growth rate (up to 0.17-0.23 h(-1)) and maximal standing cell density (up to 8 x 10(10) cells l(-1) culture). These levels of lutein are in the range of those reported for astaxanthin in Haematococcus and for beta-carotene in Dunaliella, microalgae of recognized interest for the production of these carotenoids. Lutein content of Muriellopsis sp. increased during the exponential phase of growth, with the highest value being recorded in the early stationary phase. Maximum levels of lutein in Muriellopsis sp. cultures were recorded at 20-40 mM NaNO3, 2-100 mM NaCl, 460 micromol photon m(-2) s(-1), pH 6.5 and 28 degrees C, conditions which were, in general, also optimal for cell growth. Growth-limiting conditions, such as pH values of 6 or 9 and a temperature of 33 degrees C, were found to stimulate carotenogenesis in Muriellopsis sp. This strain represents a potential source of lutein, a commercially interesting carotenoid of application in aquaculture and poultry farming, as well as in the prevention of cancer and diseases related to retinal degeneration.

Cell Division↗
PubMed2000

Regulation of adenohypophyseal pyroglutamyl aminopeptidase II activity by thyrotropin-releasing hormone and phorbol esters.

Thyrotropin-releasing hormone (TRH) is inactivated by a narrow specificity ectopeptidase, pyroglutamyl aminopeptidase II (PPII), in the proximity of target cells. In adenohypophysis, PPII is present on lactotrophs. Its activity is regulated by thyroid hormones and 17beta-estradiol. Studies with female rat adenohypophyseal cell cultures treated with 3,3',5'-triiodo-L-thyronine (T3) showed that hypothalamic/paracrine factors, including TRH, can also regulate PPII activity. Some of the transduction pathways involve protein kinase C (PKC) and cyclic adenosine monophosphate (cAMP). The purpose of this study was to determine whether T3 levels or gender of animals used to propagate the culture determine the effects of TRH or PKC. PPII activity was lower in cultures from male rats. In cultures from both sexes, T3 induced the activity. The percentages of decrease due to TRH or PKC were independent of T3 or gender; the percentage of decrease due to cAMP may also be independent of gender. These results suggest that T3 and hypothalamic/paracrine factors may independently control PPII activity in adenohypophysis, in either male or female animals.

Aminopeptidases↗
PubMed2000

The physical properties of packable and conventional posterior resin-based composites: a comparison.

BACKGROUND: The authors compared the physical properties of three packable hybrid resin-based composites with those of a conventional hybrid and a microfill composite material advocated for use as posterior restorative materials. They evaluated diametral tensile strength, or DTS; compressive strength, or CS; flexural strength, or FS; and depth of cure, or DC. METHODS: The authors studied the following resin-based restorative materials: three packable composites, Alert Condensable Composite (Jeneric Pentron), SureFil High Density Posterior Restorative (Dentsply Caulk) and Solitaire (Heraeus Kulzer); one conventional hybrid composite, TPH Spectrum (Dentsply Caulk); and one microfill, Heliomolar Radiopaque (Ivoclar-Vivadent). The authors evaluated DTS, CS, FS and DC, according to American National Standards Institute criteria. They made scanning electron micrographs of the packable resin-based composites. RESULTS: Results demonstrated that the conventional hybrid, TPH Spectrum, had significantly greater DTS and FS than other resin-based composites. Alert and SureFil had comparable DTS and FS, which were significantly greater than Heliomolar's DTS and FS. Solitaire had significantly lower DTS and FS than all other resin-based composites. SureFil had the highest CS, followed by TPH Spectrum, Solitaire and Alert, which were comparable and had significantly greater CS than Heliomolar. TPH Spectrum and Alert had significantly greater DC than all other resin-based composites, followed in decreasing order by SureFil, Solitaire and Heliomolar. CONCLUSION: While the packable composites tested in this study had physical properties superior to those of the microfill composite, they were no better suited for use as a posterior restorative material than was the conventional hybrid resin-based composite. CLINICAL IMPLICATIONS: Packable composites may be easier for clinicians to handle than conventional resin-based composites; however, their physical properties were not superior to those of the conventional small-particle hybrid resin-based composite. In addition, these materials may have the clinical drawback of increased wear and surface roughness that was seen with early, large-particle composite restorative materials.

Acrylic Resins↗
PubMed2000

The spectrum of composites: new techniques and materials.

BACKGROUND: During the past 25 years, advances in adhesive technology and composite-based resins have provided dentists and patients with new treatment options. This technology provides patients with more tooth-conserving and highly esthetic restorations. CLINICAL IMPLICATIONS: This article reviews advances in composite-based resin materials. It discusses composition and classification of current resin-based composite. It also reviews techniques for successful placement of these materials and provides a discussion of current concepts of polymerization.

Adhesives↗
PubMed1999

Current status of luting agents for fixed prosthodontics.

STATEMENT OF THE PROBLEM: The long-term clinical outcome of fixed prosthodontic treatment depends, in part, on the use of adhesives that can provide an impervious seal between the restoration and the tooth. There are several types of available luting agents, each possessing unique properties and handling characteristics. No one product is ideal for every type of restoration. PURPOSE: The purpose of this article is to review available dental luting agents, discuss improvements and drawbacks in newly formulated adhesives, and present the indications for their use. RESULTS: Each cement type is physically and chemically unique. A single adhesive will not suffice in modern day clinical practice.

Adhesives↗
PubMed1999

Colorimetric assessment of laser and home bleaching techniques.

PURPOSE: This study recorded in vitro color change of three tooth bleaching techniques that included laser-activated hydrogen peroxide and two concentrations of carbamide peroxide. MATERIALS AND METHODS: Forty extracted human central incisors were exposed to argon laser-activated 35% H2O2, 10% carbamide peroxide, or 20% carbamide peroxide. A fourth group (control) did not receive any bleach treatment (n = 10/group). Commission International de l'Eclariage (CIE) L*a*b* coordinates were recorded prior to bleaching (baseline), at 1 week, and at 2 weeks. The color difference (delta E*ab) between baseline and subsequent measurements was calculated. RESULTS: The control group did not demonstrate significant color difference over time (p > .05). The laser group was not statistically different from the control group (p > .01). The color difference of the 10% and 20% carbamide peroxide groups was statistically different from the control group (p < .01). CLINICAL SIGNIFICANCE: Exposure to 20% carbamide peroxide produced the greatest perceivable change in color. The recommended one-time application of laser-activated hydrogen peroxide did not demonstrate any perceivable color change. The clinician should be aware that additional or longer applications may be required.

Carbamide Peroxide↗
PubMed1999

Effect of two abrasive systems on resin bonding to laboratory-processed indirect resin composite restorations.

PURPOSE: This study compared two methods of surface roughening or preparation, with or without the use of proprietary surface wetting agents, to evaluate their effect on resin cement adhesion to the following laboratory-processed, indirect restorations: Artglass (AG), belleGlass HP (BG), Concept (C), and Targis (T). Methods of surface roughening or preparation included microetching with aluminum oxide (AO): 50 microns at 34 psi and silanized silica coating, CoJet-Sand (CJ): 30 microns at 34 psi. Artglass and Concept were tested with and without the use of their respective surface wetting agents: Artglass Liquid (AGL) and Special Bond II (SB). MATERIALS AND METHODS: One hundred twenty specimens, each consisting of a pair of cylinders (7.0 x 3 mm and 4.3 x 3 mm) were fabricated. The larger cylinder or base was embedded in self-curing resin in a phenolic ring, and bonding surfaces were finished with 320-grit silicon carbide paper. Specimen pairs for each restorative material were randomly assigned to treatment groups (n = 10) and received the following surface treatments prior to cementation: group 1 (AG/AO/+AGL), group 2 (AG/AO/-AGL), group 3 (AG/CJ/+AGL), group 4 (AG/CJ/-AGL), group 5 (BG/AO), group 6 (BG/CJ), group 7 (C/AO/+SB), group 8 (C/AO/-SB), group 9 (C/CJ/+SB), group 10 (C/CJ/-SB), group 11 (T/AO), and group 12 (T/CJ). Specimen pairs were cemented with a dual-cure resin cement (Dual) and a standardized force of 1 MPa. Specimens were light-cured 40 seconds per side (80 s total), then thermocycled 300 times at between 5 degrees and 55 degrees C. Shear bond strengths (MPa) were determined using a Zwick Materials Testing Machine at a crosshead speed of 5 mm per minute. RESULTS: One-way analysis of variance (ANOVA) and Duncan's multiple range test (alpha = 0.05) by restoration type indicated no significant differences in shear bond strength between BG group 5 (29.8 +/- 5.8), BG group 6 (28.3 +/- 4.3), T group 11 (29.3 +/- 4.9), and T group 12 (29.0 +/- 4.4). Shear bond strength in AG group 3 (35.9 +/- 3.4) was significantly higher than in AG group 4 (32.4 +/- 4.0) and equal to that in AG group 2 (31.9 +/- 3.9) and AG group 1 (30.0 +/- 3.6). Shear bond strength in C group 10 (24.8 +/- 5.7) was equal to that in C group 9 (21.5 +/- 2.9), but was higher than in C groups 7 (19.4 +/- 3.1) and 8 (19.3 +/- 3.4). CLINICAL SIGNIFICANCE: Under the conditions of this study, the combination of CoJet-Sand and Artglass Liquid resulted in the highest bond strength for Artglass restorations. Microetching with CoJet-Sand or aluminum oxide followed by wetting with an unfilled adhesive was an effective surface pretreatment for dual-cure resin cementation of the four proprietary indirect resin-ceromer restorations tested.

Acid Etching, Dental↗
PubMed1999

Amalgam shear bond strength to dentin using single-bottle primer/adhesive systems.

PURPOSE: To evaluate the in vitro shear bond strengths (SBS) of a spherical amalgam alloy (Tytin) to dentin using several single-bottle primer/adhesive systems both alone: Single Bond (SB), OptiBond Solo (Sol), Prime & Bond 2.1 (PB), One-Step (OS) and in combination with the manufacturer's supplemental amalgam bonding agent: Single Bond w/3M RelyX ARC (SBX) and Prime & Bond 2.1 w/Amalgam Bonding Accessory Kit (PBA). Two, three-component adhesive systems, Scotchbond Multi-Purpose (SBMP) and Scotchbond Multi-Purpose Plus w/light curing (S + V) and w/o light curing (S+) were used for comparison. MATERIALS AND METHODS: One hundred eight extracted human third molars were mounted lengthwise in phenolic rings with acrylic resin. The proximal surfaces were ground to expose a flat dentin surface, then polished to 600 grit silicon carbide paper. The teeth were randomly assigned to 9 groups (n = 12), and dentin surfaces in each group were treated with an adhesive system according to the manufacturer's instructions, except for S + V specimens, where the adhesive was light cured for 10 s before placing the amalgam. Specimens were then secured in a split Teflon mold, having a 3 mm diameter opening and amalgam was triturated and condensed onto the treated dentin surfaces. Twenty minutes after condensation, the split mold was separated. Specimens were placed in distilled water for 24 hrs, then thermocycled (300 cycles, between 5 degrees C and 55 degrees C, with 12 s dwell time). All specimens were stored in 37 degrees C distilled water for 7 days, prior to shear strength testing using a Zwick Universal Testing Machine at a cross-head speed of 0.5 mm/min. RESULTS: The highest to the lowest mean dentin shear bond strength values (MPa) for the adhesive systems tested were: S + V (10.3 +/- 2.3), SBX (10.2 +/- 3.5), PBA, (6.4 +/- 3.6), SOL (5.8 +/- 2.5), SBMP (5.7 +/- 1.8), S+ (4.8 +/- 2.3), PB (2.7 +/- 2.6), SB (2.7 +/- 1.1) and OS (2.5 +/- 1.8). One-way ANOVA and Duncan's Multiple Range Test indicated significant differences among groups. SBX and S + V produced significantly higher amalgam to dentin shear bond strengths than all other adhesive systems. Bond strengths of amalgam to dentin for the single-bottle adhesives, SOL and PBA were comparable to the three-component systems, SBMP and S+ and were significantly greater than OS, SB and PB (P < 0.05).

Analysis of Variance↗
PubMed1999

[AIDS and the hospital institution: why to think/rethink about this relationship?].

Through the report of a situation occurred within the hospital institution, the article tries to focus on the way how the AIDS question has been thought in this enviroment. Furthermore, it broaches the possibility of compromising the hospital as a space for reflection and discussion. Through the analysis, it articulates the subjects implicated in the situation with gender, sex, sexuality, race and ethic questions. It also relates AIDS to risk groups, as a meaning to promote the occlusion, and to power relations within the hospital institution. As a conclusion, the article proposes more questions for us to think over our practice as professionals inserted in this context.

Acquired Immunodeficiency Syndrome↗