Biomedical subjects

M C Garnett

Publications and source records attributed to M C Garnett.

At least 19 recordsLinked to original sources

PubMed2001

Determination of protection from serum nuclease activity by DNA-polyelectrolyte complexes using an electrophoretic method.

Polyelectrolyte complexes between cationic polymers and DNA have emerged as potential nonviral vectors for DNA delivery. For successful in vivo delivery, methods for analyzing their ability to prevent digestion of the DNA payload by serum nucleases are essential. We report here a simple assay to determine degradation of DNA in these complexes using standard electrophoretic techniques. The assay is based on a high pH buffer which can dissociate the complexes under standard electrophoretic conditions. This assay can be used qualitatively to determine the time taken for degradation to occur. Alternatively, with a standard gel analysis program it can be used quantitatively to investigate rates of DNA degradation from complexes in the presence of serum nucleases. We have shown that it can distinguish between different formulations with the same polymer, and also to distinguish between the time taken to degradation and the rates of degradation of DNA in complexes formed with two structurally related, linear polyamidoamine polymers. The assay could also distinguish between the time to degradation using poly-l-lysine complexes, although these were less well dissociated by the electrophoresis buffer, and could not be analyzed quantitatively. This assay will be of value in investigating and developing polyelectrolyte formulations for parenteral administration.

Buffers↗

PubMed2001

Preparation and characterisation of rose Bengal-loaded surface-modified albumin nanoparticles.

Surface-modified albumin nanoparticles were prepared from two poly(ethylene glycol)-human serum albumin conjugates: poly(thioetheramido acid)-poly(ethylene glycol) copolymer-grafted HSA (HSA-PTAAC-PEG) and methoxy poly(ethylene glycol)-grafted HSA (HSA-mPEG). Rose bengal (RB) was used as a model drug for encapsulation into the nanoparticles either during the particle production or by adsorption post particle preparation. The drug incorporation and release was affected by the different production methods and the different polymer compositions. When RB was loaded in HSA and HSA/HSA-PTAAC-PEG nanoparticles, up to 5% (w/w) drug content was achieved. The drug loading in HSA-mPEG nanoparticles was much lower and the results from the microcalorimetry study indicated that the low loading efficiency was due to less drug-protein binding sites available in the HSA-mPEG molecule as compared to the HSA molecule. The release of RB from the albumin nanoparticles was very slow in PBS and dramatically accelerated in the presence of trypsin. Compared with unmodified nanoparticles, the slower release of RB from the surface-modified HSA nanoparticles in the presence of the enzyme suggested that the existence of a steric hydrophilic barrier on the surface of the nanoparticles made digestion of the nanoparticles more difficult.

Administration, Oral↗

PubMed2000

Polymer chemical structure is a key determinant of physicochemical and colloidal properties of polymer-DNA complexes for gene delivery.

Polyplexes are now emerging as potentially useful vectors for gene therapy. To improve our understanding of how the chemical structure of the polymer affects the properties of these systems, a series of structurally related polymers, the linear poly(amidoamine)s (PAAs), have been examined for their abilities to form complexes with DNA. Structure-dependent differences in DNA binding are shown by gel electrophoretic retardation of DNA and thermal transition analyses. Two PAAs, NG28 and NG30, stand out as having high affinity DNA binding characteristics, similar to the model homopolypeptide, poly-L-lysine. In addition, differences in complex formation, particle size and surface charge are displayed for the different polymer-DNA systems. Electron microscopy studies showed that the polymers condensed DNA into similar unit structures but only complexes with NG30 did not undergo agglomeration. This was attributed to an excess of complexed polymer forming a shell of uncomplexed polymer chain segments around a condensed DNA-polymer core. The transfection activities of these polymer complexes differ greatly, and some of these differences can be explained in a multifactorial way by the physicochemical and colloidal properties. It is concluded that polymer chemical structure dictates the apparent affinity of DNA binding, and also several of the important colloidal characteristics of the resulting complexes.

Chloroquine↗

PubMed2000

Defining the drug incorporation properties of PLA-PEG nanoparticles.

The drug incorporation and physicochemical properties of PLA-PEG micellar like nanoparticles were examined in this study using a model water soluble drug, procaine hydrochloride. Procaine hydrochloride was incorporated into nanoparticles made from a series of PLA-PEG copolymers with a fixed PEG block (5 kDa) and a varying PLA segment (3-110 kDa). The diameter of the PLA-nanoparticles increased from 27.7 to 174.6 nm, with an increase in the PLA molecular weight. However, drug incorporation efficiency remained similar throughout the series. Incorporation of drug into the smaller PLA-PEG nanoparticles made from 3:5, 15:5 and 30:5 copolymers did not influence the particle size, while an increase was observed for the larger systems comprising 75:5 and 110:5 copolymers. An increase in drug content for PLA-PEG 30:5 nanoparticles was achieved by increasing the theoretical loading (quantity of initially present drug). The size of these nanoparticles remained unchanged with the increasing drug content, supporting the proposed micellar type structure of the PLA-PEG 30:5 nanoparticles. The morphology of these systems remained unchanged both at low and high theoretical drug loadings. Formulation variables, such as an increase in the aqueous phase pH, replacement with the base form of the drug and inclusion of lauric acid in the formulation did not improve the incorporation efficiency of drug into PLA-PEG 30:5 nanoparticles. While poly(aspartic acid) as a complexation agent did not improve the drug incorporation efficiency of procaine hydrochloride, it did so for another water soluble drug diminazene aceturate. This may be attributed to a stronger interaction of diminazene aceturate with poly(aspartic acid) relative to procaine hydrochloride, as confirmed by thermodynamic analysis of isothermal titration calorimetric data. The drug incorporation and physicochemical characterisation data obtained in this study may be relevant in optimising the drug incorporation and delivery properties of these potential drug targeting carriers.

Anesthetics, Local↗

PubMed1999

Preparation and in vitro characterization of HSA-mPEG nanoparticles.

Surface modified human serum albumin (HSA) nanoparticles with a size of approximately 150 nm in diameter were prepared from a PEG-HSA conjugate, methoxy-polyethylene glycol modified human serum albumin (HSA-mPEG) using a coacervation method and crosslinked with glutaraldehyde. The zeta-potential of the surface modified nanoparticles was significantly lower than that of unmodified HSA nanoparticles. The existence of a hydrated steric barrier surrounding the nanoparticles was confirmed by electrolyte and pH induced flocculation tests. The surface modified nanoparticles showed a reduced plasma protein adsorption on the particle surface compared with unmodified particles.

Animals↗

PubMed1999

In vitro cytotoxicity of poly(amidoamine)s: relevance to DNA delivery.

We have examined the cytotoxicity of a number of poly(amidoamine) polymers which have been proposed for use as DNA delivery systems and compared them to the charged polyamino acid polylysine. Most of the poly(amidoamine)s tested were shown to be remarkably non-toxic to both HepG2 and HL60 cell lines. However, one of the structures (NG30, co-monomers methylene bisacrylamide, dimethylethylene diamine) did show cytotoxicity similar to that of polylysine. A second PAA structure (NG37, NG38, NG39, co-monomers bisacryloyl piperazine, 2-methyl piperazine) showed mild cytotoxicity towards both cell lines, related to the degree of polymerisation. The results support the idea that the cytotoxicity of polycations has a strong structural basis rather than being an effect due only to charge. As a consequence of their general reduced level of cytotoxicity, poly(amidoamine)s appear to have possible advantages for complexation with DNA over some other cationic polymers as a key component of DNA delivery systems.

Cation Exchange Resins↗

PubMed1999

PLGA nanoparticles prepared by nanoprecipitation: drug loading and release studies of a water soluble drug.

The nanoprecipitation technique for preparation of nanoparticles suffers the drawback of poor incorporation of water soluble drugs. The aim of this study was therefore to assess various formulation parameters to enhance the incorporation of a water soluble drug (procaine hydrochloride) into poly(dl-lactide-co-glycolide) (PLGA) nanoparticles prepared by this technique. Approaches investigated for drug incorporation efficiency enhancement included the influence of aqueous phase pH, replacement of procaine hydrochloride with procaine dihydrate and the inclusion of excipients: poly(dl-lactide) (PLA) oligomers, poly(methyl methacrylate-co-methacrylic acid) (PMMA-MA) or fatty acids into the formulation. The nanoparticles produced were submicron size (<210 nm) and of low polydispersity. It was found that an aqueous phase pH of 9.3, replacement of procaine hydrochloride with procaine dihydrate and the incorporation of PMMA-MA, lauric and caprylic acid into the formulation could enhance drug incorporation efficiency without the size, morphology and nanoparticle recovery being adversely influenced. For instance changing the aqueous phase pH from 5.8 to 9.3 increased nanoparticle recovery from 65.1 to 93.4%, drug content from 0.3 to 1.3% w/w and drug entrapment from 11.0 to 58.2%. However, the presence of high ratios of lauric acid and procaine dihydrate in the formulation adversely affected the morphology and size of the nanoparticles. Also, PLA oligomers were not considered a feasible approach since it decreased drug entrapment from 11.0 to 8.4% and nanoparticle recovery from 65.1 to 19.6%. Drug release from nanoparticles appears to consist of two components with an initial rapid release followed by a slower exponential stage. This study has demonstrated that formulation variables can be exploited in order to enhance the incorporation of a water soluble drug into PLGA nanoparticles by the nanoprecipitation technique.

Buffers↗

PubMed1999

Gene-delivery systems using cationic polymers.

Gene therapy will benefit a range of diseases from single-gene defects, to chronic diseases such as cancer, to vaccination. Initially, gene therapy used viral vectors, but the advantages of nonviral systems are now being fully appreciated. This review focuses on cationic polymers as a delivery system for DNA. The physicochemical characterization of DNA polycation complexes that condense and protect DNA from nuclease digestion are considered, together with further factors such as ligand targeting, endosomal escape, and nuclear localization. Where possible, the relative efficacy of different cationic polymer delivery systems is compared.

Animals↗

PubMed1998

In vitro displacement by rat serum of adsorbed radiolabeled poloxamer and poloxamine copolymers from model and biodegradable nanospheres.

Poloxamer 407 and poloxamine 908 have been used by many research groups to modify the surface of both model latex and biodegradable nanospheres, thereby producing nanospheres that have shown reduced protein adsorption in vitro and extended circulation times in vivo. A potential limitation of such systems is the desorption of the copolymer coating layer. We describe a two-stage process to radiolabel poloxamer 407 and poloxamine 908 that has facilitated an investigation into this potential desorption, in vitro. The first stage of the labeling procedure involved the substitution of the terminal hydroxyl groups in each poly(ethylene oxide) (PEO) chain of poloxamer 407 and poloxamine 908 with an amino group. The aminated copolymers were then radiolabeled with 125Iodine Bolton-Hunter reagent. The efficiency of labeling was calculated to be approximately 20% for the tetramine poloxamine 908 and approximately 33% for the diamine poloxamer 407. Remaining free amino groups were then either acetylated, using acetic anhydride, or left in the free amino form. Covalent linkage of the radiolabel to the copolymer was confirmed by nuclear magnetic resonance (NMR) and infrared (IR) spectroscopy. The stability of the link between radiolabel and copolymer to hydrolysis was also confirmed; <4% loss of radiolabel occurred from poloxamine 908 after incubation in phosphate-buffered saline (PBS) at 37 degrees C for 8 days. The radiolabeled copolymers (with the free amino groups acetylated) were then used in experiments that have given the first direct evidence that adsorbed copolymers can be displaced by serum proteins in significant amounts from the surface of model and biodegradable nanospheres. The displacement was highly dependent on copolymer-nanosphere compatibility, with up to 78% of 125I tetramine poloxamine 908 being displaced from poly(lactide-co-glycolide) (PLGA) nanospheres in 24 h, compared with 20% displacement of 125I tetramine poloxamine 908 in 24 h from polystyrene nanospheres. These results have direct implication for the future design of drug delivery systems based on coated nanospheres.

Animals↗

PubMed1998

Modification of the copolymers poloxamer 407 and poloxamine 908 can affect the physical and biological properties of surface modified nanospheres.

PURPOSE: To investigate the effects of the modification of the copolymers poloxamer 407 and poloxamine 908 on the physical and biological properties surface modified polystyrene nanospheres. METHODS: A method to modify poloxamer 407 and poloxamine 908, introducing a terminal amine group to each PEO chain has been developed. The aminated copolymers can be subsequently radiolabelled with Iodinated (I125) Bolton-Hunter reagent. The aminated copolymers were used to surface modify polystyrene nanospheres. The physical and biological properties of the coated nanospheres were studied using particle size, zeta potential, in vitro non-parenchymal cell uptake and in vivo biodistribution experiments. RESULTS: The presence of protonated amine groups in the modified copolymers significantly affected the physical and biological properties of the resulting nanospheres, although the effects were copolyme specific. The protonated surface amine groups in both copolymers reduced the negative zeta potential of the nanospheres. Acetylation of the copolymer's free amine groups resulted in the production of nanospheres with comparable physical properties to control unmodified copolymer coated nanospheres. In vivo, the protonated amine groups in the copolymers increased the removal of the nanospheres by the liver and spleen, although these effects were more pronounced with the modified poloxamer 407 coated nanospheres. Acetylation of the amine groups improved the blood circulation time of the nanospheres providing modified poloxamine 908 coated nanospheres with comparable biological properties to control poloxamine 908 coated nanospheres. Similarly, modified poloxamer 407 coated nanospheres had only slightly reduced circulation times in comparison to control nanospheres. CONCLUSIONS: The experiments have demonstrated the importance of copolymer structure on the biological properties of surface modified nanospheres. Modified copolymers, which possess comparable properties to their unmodified forms, could be used in nanosphere systems where antibody fragments can be attached to the copolymers, thereby producing nanospheres which target to specific body sites.

Animals↗

PubMed1997

Preparation of surface-modified albumin nanospheres.

Surface-modified human serum albumin (HSA) nanospheres with a size of around 100 nm in diameter were prepared from poly(amidoamine)-poly(ethylene glycol) copolymer grafted human serum albumin (HSA-PAA-PEG) and poly(thioetheramido acid)-poly(ethylene glycol) copolymer grafted human serum albumin (HSA-PTAAC-PEG). The nanospheres were produced using a pH-coacervation method and cross-linked with glutaraldehyde. The cross-linking efficiency was affected by the type of albumin conjugate used. The zeta potential of the surface-modified nanospheres was significantly lower than that of unmodified particles. The existence of a hydrated steric barrier surrounding the nanospheres was confirmed by electrolyte- and pH-induced flocculation tests. The surface-modified nanospheres showed a reduced plasma protein adsorption on the particle surface compared with unmodified particles.

Adsorption↗

PubMed1997

Long circulating biodegradable poly(phosphazene) nanoparticles surface modified with poly(phosphazene)-poly(ethylene oxide) copolymer.

The biodistribution of biodegradable poly(organo phosphazene) nanoparticles surface modified by adsorption of a novel poly(organo phosphazene)-poly(ethylene oxide) copolymer with a 5000 M(W) PEO chain (PF-PEO[5000]), following intravenous administration in rats and rabbits, is described. The data are compared to the biodistribution of poly(organo phosphazene) and poly(lactide-co-glycolide) nanoparticles coated with a tetrafunctional copolymer of poly(ethylene oxide)-poly(propylene oxide) ethylenediamine, commercially available as Poloxamine 908. This copolymer has a PEO chain of the same size as the poly(organo phosphazene)-PEO derivative used. The results in the rat model reveal that poly(organo phosphazene) nanoparticles with a Poloxamine 908 coating were mainly captured by the liver, although a retardation in clearance from the systemic circulation was seen. In contrast, the poly(organo phosphazene) nanoparticles coated with PF-PEO(5000) showed a prolonged blood circulating profile, with only a small amount of the nanoparticles sequestered by the liver. This indicates the importance of the nature of both the anchoring group and the particle surface on the biological performances of the system. Study of the biodistribution of the PF-PEO(5000)-coated poly(organo phosphazene) nanoparticles in the rabbit model also indicated a prolonged systemic circulation lifetime and reduced liver uptake, whereby a significant amount of the administered nanoparticles was targeted to the bone marrow.

Animals↗

PubMed1995

Design, synthesis and in vitro testing of methotrexate carrier conjugates linked via oligopeptide spacers.

A range of methotrexate (MTX)-spacer-human serum albumin (HSA) conjugates have been prepared. They have been designed to release one of the following materials: MTX, MTX-Lys (alpha-epsilon) or MTX-Lys (gamma-epsilon). These materials have previously been shown to be the low-molecular-weight products released on hydrolysis of a MTX-HSA conjugate by rat liver tritosomes. Preliminary studies were carried out using a lysine residue, linked by the epsilon-amino group to the oligopeptide chain, as a model for the polymer. This use of this model system indicated that an Ala-Leu-Ala-Leu spacer was cleaved by lysosomal enzymes with release of the appropriate derivative. Analysis of the lysosomal digestion products of the MTX-spacer-HSA conjugates showed that the model system appeared to work well. A maximum rate of release of 100% MTX-Lys (alpha-epsilon) from a MTX-spacer-HSA within 48 h was obtained, as compared to 5% in 48 h obtained for MTX-HSA. Determination of the in vitro cytotoxicity of the conjugates showed that release of 'free' MTX was 10-fold more cytotoxic than either of the MTX-Lys derivatives, but the level of release of MTX from MTX-HSA was 10-fold less than that of the MTX-Lys materials.

Amino Acid Sequence↗

PubMed1995

Studies on the mechanism of action of an MTX-HSA-MoAb conjugate.

The active principles of a monoclonal antibody (791T/36)-human serum albumin-methotrexate (MoAb-HSA-MTX) conjugate have been investigated and identified. This drug-carrier conjugate has previously been shown to be selective for the target cell line, more potent than the 'free' drug, to be internalized into the lysosomes of the cell and to work by a lysosomotropic mechanism. Digestion of MTX-HSA by lysosomal enzymes showed three peaks by HPLC assay. Using authentic standards prepared by solid-phase peptide synthesis, these peaks were identified as 'free' MTX, MTX-Lys (alpha-epsilon) and MTX-Lys (gamma-epsilon). Optimization of the digestion conditions allowed for a maximum total release of MTX-containing material of 5% after 48 h. Of this released material, only 10% was in the form of 'free' MTX. It was shown that increasing the ratio of drug to carrier improved the efficiency of release of drug, and these results were complemented by in vitro cytotoxicity assays. Such a low level of drug release associated with a conjugate which has been shown to be superior, in terms of cytotoxicity, to 'free' drug against the target cell line was an unexpected finding. The consequences of these results are discussed.

Animals↗

PubMed1994

Surface modification of poly(lactide-co-glycolide) nanospheres by biodegradable poly(lactide)-poly(ethylene glycol) copolymers.

The modification of surface properties of biodegradable poly(lactide-co- glycolide) (PLGA) and model polystyrene nanospheres by poly(lactide)-poly(ethylene glycol) (PLA:PEG) copolymers has been assessed using a range of in vitro characterization methods followed by in vivo studies of the nanospheres biodistribution after intravenous injection into rats. Coating polymers with PLA:PEG ratio of 2:5 and 3:4 (PEG chains of 5000 and 2000 Da. respectively) were studied. The results reveal the formation of a PLA:PEG coating layer on the particle surface resulting in an increase in the surface hydrophilicity and decrease in the surface charge of the nanospheres. The effects of addition of electrolyte and changes in pH on stability of the nanosphere dispersions confirm that uncoated particles are electrostatically stabilized, while in the presence of the copolymers, steric repulsions are responsible for the stability. The PLA:PEG coating also prevented albumin adsorption onto the colloid surface. The evidence that this effect was observed for the PLA:PEG 3:4 coated nanospheres may indicate that a poly(ethylene glycol) chain of 2000 Da can provide an effective repulsive barrier to albumin adsorption. The in vivo results reveal that coating of PLGA nanospheres with PLA:PEG copolymers can alter the biodistribution in comparison to uncoated PLGA nanospheres. Coating of the model polystyrene nanospheres with PLA:PEG copolymers resulted in an initial high circulation level, but after 3 hours the organ deposition data showed values similar to uncoated polystyrene spheres. The difference in the biological behaviour of coated PLGA and polystyrene nanospheres may suggest a different stability of the adsorbed layers on these two systems.(ABSTRACT TRUNCATED AT 250 WORDS)

Animals↗

PubMed1994

Preparation of sterically stabilized human serum albumin nanospheres using a novel Dextranox-MPEG crosslinking agent.

Human serum albumin (HSA) nanospheres with a size less than 200 nm in diameter were prepared using a modified coacervation method and crosslinking with methyl polyethylene glycol modified oxidized Dextram (Dextranox-MPEG) which created a sterically stabilizing polyethylene oxide surface layer surrounding the nanospheres. The crosslinking efficiency and the surface characteristics of glutaraldehyde and Dextranox-MPEG crosslinked HSA nanospheres were determined and compared. The zeta potential of the Dextranox-MPEG crosslinked particles was significantly lower than that of glutaraldehyde stabilized particles. The existence of a hydrated steric barrier surrounding the nanospheres was confirmed by an electrolyte and pH induced flocculation test. The Dextranox-MPEG crosslinked nanospheres showed a significantly reduced plasma protein adsorption on the particle surface compared with glutaraldehyde crosslinked nanospheres.

Chemistry, Pharmaceutical↗

PubMed1994

The acidic groups of the neocarzinostatin protein play an important role in its biological activity.

Despite the extensive literature on the mechanism of action of the anticancer agent neocarzinostatin (NCS), the role of the protein moiety is still not clear. The model involving endocytosis of intact holo-NCS has been dismissed in favor of a theory proposing entry of free dissociated chromophore. However, the fact that the NCS protein has a certain affinity for cell membranes cannot be disregarded. In the present work the protein moiety has been modified by transformation of the carboxyl groups into isopropylamide groups. This modification resulted in a broad shift of the protein pI towards higher values, accompanied by a marked reduction of toxicity in vitro and reduced binding of protein to cells. Coincubation of modified NCS with inactive native apo-NCS led to restoration of the biological activity of native holo-NCS. It has been shown chromatographically that the modified NCS is capable of transferring active chromophore to native apo-NCS. The inactive form (apoprotein) of the charge-modified NCS, however, is capable of inhibiting the toxicity of the active form, as has been described for the corresponding native pair. Binding experiments with tritium-labeled proteins revealed that the modified protein has diminished affinity for membranes, in comparison with native NCS.

Agar↗

PubMed1993

Synthesis of 2'-deoxyuridine and 5-fluoro-2'-deoxyuridine derivatives and evaluation in antibody targeting studies.

Derivatives of 2'-deoxyuridine and of the anticancer agent 5-fluoro-2'-deoxyuridine (FdUR) were linked indirectly via a human serum albumin carrier (HSA) to the murine antiosteosarcoma monoclonal antibody 791T/36. Starting from the 2'-deoxyuridines 1a and 1b, the new nucleosides containing 5'-succinamic acid 7 and 5'-maleamic acid 8 spacers were synthesized from the key intermediate 5'-aminonucleoside 4, and the ribofuronamidobenzoic acid 13 from ribofuranuronic acid 10. These nucleosides were linked via their spacer functionality to HSA. High molar substitution ratios (MSR: moles of drug/mole of HSA) of 25-40 for these derivative-HSA conjugates were achieved. All derivatives were less cytotoxic than the parent drug against both antigen positive osteogenic sarcoma 791T and antigen negative bladder carcinoma T24 cell lines; no IC50 was achieved with any derivative against 791T cells. The fluorodeoxyuridine-HSA conjugates were then further linked via a stable thioether bond to the mouse monoclonal antibody 791T/36. The optimum fluorinated 5'-succinamic acid immunoconjugate exhibited an IC50 of 1 microM against 791T and T24 cells, slightly better than that of fluorodeoxyuridine. The unconjugated derivative 7 was much less cytotoxic than immunoconjugate, with an IC50 of 62 microM on T24 cells, and failed to reach 50% inhibition of 791T cell growth at 290 microM concentration. Derivative 7-HSA conjugate was 10-fold less cytotoxic than the immunoconjugate against both cell lines. Immunoconjugates synthesized with the other 5-fluoro derivatives were unable to effect 50% inhibition of growth of cell lines. Nonfluorinated derivatives and their HSA conjugates and immunoconjugates exhibited no cytotoxicity.

Antibodies, Monoclonal↗