PubMed Health⌕ Search

Biomedical subjects

M Cygler

Publications and source records attributed to M Cygler.

At least 37 records · Page 2Linked to original sources

The occluding loop in cathepsin B defines the pH dependence of inhibition by its propeptide.

Papain-like proenzymes are prone to autoprocess under acidic pH conditions. Similarly, peptides derived from the proregion of cathepsin B are potent pH-dependent inhibitors of that enzyme; i.e., at pH 6.0 the inhibition of human cathepsin B by its propeptide is defined by slow binding kinetics with a Ki of 3.7 nM and at pH 4.0 by classical kinetics with a Ki of 82 nM. This pH dependency is essentially eliminated either by the removal of a portion of the enzyme's occluding loop through deletion mutagenesis or by the mutation of either residue Asp22 or His110 to alanine; e.g., the mutant enzyme His110Ala is inhibited by its propeptide with Ki's of 2.0 +/- 0.3 nM at pH 4.0 and 1.1 +/- 0.2 nM at pH 6.0. For the His110Ala mutant the inhibition also displays slow binding kinetics at both pH 4.0 and pH 6.0. As shown by the crystal structure of mature cathepsin B [Musil, D., et al. (1991) EMBO J. 10, 2321-2330] Asp22 and His110 form a salt bridge in the mature enzyme, and it has been shown that this bridge stabilizes the occluding loop in its closed position [Nägler, D. K., et al. (1997) Biochemistry 36, 12608-12615]. Thus the pH dependency of propeptide binding can be explained on the basis of a competitive binding between the occluding loop and the propeptide. At low pH, when the Asp22-His110 pair forms a salt bridge stabilizing the occluding loop in its closed conformation, the loop more effectively competes with the propeptide than at higher pH where deprotonation of His110 and the concomitant destruction of the Asp22-His110 salt bridge results in a destabilization of the closed form of the loop. The rate of autocatalytic processing of procathepsin B to cathepsin B correlates with the affinity of the enzyme for its propeptide rather than with its catalytic activity, thus suggesting a possible influence of occluding loop stability on the rate of processing.

Amino Acid Sequence↗

Crystallization and preliminary X-ray analysis of chondroitinase B from Flavobacterium heparinum.

Chondroitinase B, a glycosaminoglycan lyase from Flavobacterium heparinum, has been crystallized by hanging-drop vapor diffusion in space group P21 with unit-cell parameters a = 50.6, b = 74.5, c = 58. 7 A, beta = 92.9 degrees and one molecule in the asymmetric unit. This enzyme degrades dermatan sulfate, a glycosaminoglycan primarily made up of a disaccharide repeating unit of iduronic acid and N-acetylgalactosamine. A complete native data set has been collected from a single crystal to 2.2 A resolution using a rotating-anode source.

Chondroitin ABC Lyase↗

Crystal structure of wild-type human procathepsin K.

Cathepsin K is a lysosomal cysteine protease belonging to the papain superfamily. It has been implicated as a major mediator of osteoclastic bone resorption. Wild-type human procathepsin K has been crystallized in a glycosylated and a deglycosylated form. The latter crystals diffract better, to 3.2 A resolution, and contain four molecules in the asymmetric unit. The structure was solved by molecular replacement and refined to an R-factor of 0.194. The N-terminal fragment of the proregion forms a globular domain while the C-terminal segment is extended and shows substantial flexibility. The proregion interacts with the enzyme along the substrate binding groove and along the proregion binding loop (residues Ser138-Asn156). It binds to the active site in the opposite direction to that of natural substrates. The overall binding mode of the proregion to cathepsin K is similar to that observed in cathepsin L, caricain, and cathepsin B, but there are local differences that likely contribute to the specificity of these proregions for their cognate enzymes. The main observed difference is in the position of the short helix alpha3p (67p-75p), which occupies the S' subsites. As in the other proenzymes, the proregion utilizes the S2 subsite for anchoring by placing a leucine side chain there, according to the specificity of cathepsin K toward its substrate.

Cathepsin K↗

Structural basis for specificity of papain-like cysteine protease proregions toward their cognate enzymes.

Synthetic peptides corresponding to the proregions of papain-like cysteine proteases have been shown to be good and selective inhibitors of their parental enzymes. The molecular basis for their selectivity, quite remarkable in some cases, is not fully understood. The recent determination of the crystal structures of three distinct papain-like cysteine protease zymogens allows detailed structural comparisons to be made. The reasons for the specificity shown by each proregion toward its cognate enzyme are explained in terms of the three-dimensional structure of the proregion and the interface between the mature enzyme and the proregion. These comparisons reveal that insertion and substitution of amino acids within the proregion cause major rearrangement of sidechains on the enzyme/proregion interface, allowing detailed surface and charge recognition.

Amino Acid Sequence↗

Lysine-based structure responsible for selective mannose phosphorylation of cathepsin D and cathepsin L defines a common structural motif for lysosomal enzyme targeting.

Previous studies have shown that lysine residues on the surface of cathepsins and other lysosomal proteins are a shared component of the recognition structure involved in mannose phosphorylation. In this study, the involvement of specific lysine residues in mannose phosphorylation of cathepsin D was explored by site-directed mutagenesis. Mutation of two lysine residues in the mature portion of the protein, Lys-203 and Lys-293, cooperated to inhibit mannose phosphorylation by 70%. Other positively charged residues could not substitute for lysine at these positions, and comparison of thermal denaturation curves for the wild type and mutant proteins indicated that the inhibition could not be explained by alterations in protein folding. Structural comparisons of the two lysine residues with those required for phosphorylation of cathepsin L, using models generated from recently acquired crystal structures, revealed several relevant similarities. On both molecules, the lysine residues were positioned approximately 34 A apart (34.06 A for cathepsin D and 33.80 A for cathepsin L). When the lysine pairs were superimposed, N-linked glycosylation sites on the two proteins were found to be oriented so that oligosaccharides extending out from the sites could share a common region of space. Further similarities in the local environments of the critical lysines were also observed. These results provide details for a common lysosomal targeting structure based on a specific arrangement of lysine residues with respect to each other and to glycosylation sites on the surface of lysosomal proteins.

Animals↗

Crystallization and preliminary analysis of chondroitinase AC from Flavobacterium heparinum.

Chondroitinase AC (E.C. 4.2.2.5) overexpressed in its host, Flavobacterium heparinum, was crystallized by vapor diffusion using polyethylene glycol methyl ether as precipitant. It crystallizes in the space group P43212 or its enantiomorph with a = b = 87.1 and c = 193.1 A and one molecule in the asymmetric unit. Crystals diffract to a maximum of 2.5 A resolution on a rotating-anode source. Screening for heavy-atom derivatives identified a lead compound that binds to a single site on the protein. Further screening is in progress.

Binding Sites↗

The 3-D structure of a folate-dependent dehydrogenase/cyclohydrolase bifunctional enzyme at 1.5 A resolution.

BACKGROUND: The interconversion of two major folate one-carbon donors occurs through the sequential activities of NAD(P)-dependent methylene[H4]folate dehydrogenase (D) and methenyl[H4]folate cyclohydrolase (C). These activities often coexist as part of a multifunctional enzyme and there are several lines of evidence suggesting that their substrates bind at overlapping sites. Little is known, however, about the nature of this site or the identity of the active-site residues for this enzyme family. RESULTS: We have determined, to 1.5 A resolution, the structure of a dimer of the D/C domain of the human trifunctional cytosolic enzyme with bound NADP cofactor, using the MAD technique. The D/C subunit is composed of two alpha/beta domains that assemble to form a wide cleft. The cleft walls are lined with highly conserved residues and NADP is bound along one wall. The NADP-binding domain has a Rossmann fold, characterized by a modified diphosphate-binding loop fingerprint-GXSXXXG. Dimerization occurs by antiparallel interaction of two NADP-binding domains. Superposition of the two subunits indicates domain motion occurs about a well-defined hinge region. CONCLUSIONS: Analysis of the structure suggests strongly that folate-binding sites for both activities are within the cleft, providing direct support for the proposed overlapping site model. The orientation of the nicotinamide ring suggests that in the dehydrogenase-catalyzed reaction hydride transfer occurs to the pro-R side of the ring. The identity of the cyclohydrolase active site is not obvious. We propose that a conserved motif-Tyr52-X-X-X-Lys56- and/or a Ser49-Gln100-Pro102 triplet have a role in this activity.

Aminohydrolases↗

Identification and crystallization of a protease-resistant core of calnexin that retains biological activity.

Calnexin is a molecular chaperone that facilitates folding of glycoproteins in the endoplasmic reticulum (ER). The cloned lumenal domain of canine calnexin, cnxDeltaTMC, retains its biological activity without the transmembrane and cytosolic region. For the purpose of structure determination we generated a crystallizable core by mild proteolysis and identified its termini by N-terminal sequencing and molecular mass determination. A truncated gene was cloned accordingly. Its product, cnxDeltaN25C15, was purified to apparent homogeneity and crystallized. This truncated variant remains biologically active as shown by its binding to monoglucosylated oligosaccharides and functional interaction with ERp57. A heavy atom derivative was identified.

Amino Acid Sequence↗

Creation of a ribonuclease abzyme through site-directed mutagenesis.

The development of abzymes (antibody/enzymes) is one method of creating reagents with novel catalytic activity. To date, most abzymes have been obtained by immunization with transition state analogs. We have chosen to start with an existing antibody and convert it into an enzyme by the addition of catalytic residues to the binding site. We have introduced a histidine residue into antibody Jel 103 and converted it into an abzyme that cleaves poly(rI) with a kinetic efficiency of about 100 M(-1) sec(-1).

Animals↗

Identification of residues essential for differential fatty acyl specificity of Geotrichum candidum lipases I and II.

The fungus Geotrichum candidum produces two lipase isoenzymes, GCL I and GCL II, with distinct differences in substrate specificity despite their 86% identical primary structure. GCL I prefers ester substrates with long-chain cis (delta-9) unsaturated fatty acid moieties, whereas GCL II also accepts medium-length (C8-C14) acyl moieties in the substrate. To reveal structural elements responsible for differences in substrate differentiating ability of these isoenzymes, we designed, expressed, and characterized 12 recombinant lipase variants. Three chimeric lipases containing unique portions of the N-terminal and the C-terminal part of GCL I and GCL II, respectively, were constructed and enzymatically characterized. Activities were measured against mixed triglyceride-poly(dimethyl siloxane) particles. Our results indicate that residues within sequence positions 349-406 are essential for GCL I's high triolein/trioctanoin activity ratio of 20. The substitution of that segment in the specific GCL I to the corresponding residues in the nonspecific GCL II resulted in an enzyme with a triolein/trioctanoin activity ratio of 1.4, identical to that of GCL II. The reverse mutation in GCL II increased its specificity for triolein by a factor of 2, thus only in part restoring the high specificity seen with GCL I. In further experiments, the point mutations at the active site entrance of the GCL I, Leu358Phe and Ile357Ala/Leu358Phe, lowered the triolein/trioctanoin activity ratio from 20 to 4 and 2.5, respectively. The substitutions Cys379Phe/Ser380Tyr at the bottom of the active site cavity of GCL I decreased its specificity to a value of 3.6. Measurements of lipase activity with substrate particles composed of pure triglycerides or ethyl esters of oleic and octanoic acids resulted in qualitatively similar results as reported above. Our data reveal for the first time the identity of residues essential for the unusual substrate preference of GCL I and show that the anatomy, both at the entrance and the bottom of the active site cavity, plays a key role in substrate discrimination.

Amino Acid Sequence↗

Nonpolar interactions of thrombin S' subsites with its bivalent inhibitor: methyl scan of the inhibitor linker.

We have designed bivalent thrombin inhibitors, consisting of a nonsubstrate type active site blocking segment, a hirudin-based fibrinogen recognition exosite blocking segment, and a linker connecting these segments. The inhibition provided by the bivalent inhibitors with various linker lengths revealed that a minimum of 15 atoms was required for simultaneous binding of the two blocking segments of the inhibitor to thrombin without significant distortion. The crystal structure of the inhibitors with a 16-atom linker showed some conformational flexibility in the linker portion which still lies deep in the groove joining the active site and the fibrinogen recognition exosite. Since the thrombin S' subsites are not well characterized, we designed a new strategy to search for possible nonpolar interactions between the linker and the thrombin S' subsites. This strategy, the "methyl scan", is based on the incorporation of a methyl side chain at each atom position of the linker by using sarcosine, D,L-alanine, D,L-3-aminoisobutyric acid, or N-methyl-beta-alanine. The methyl groups on the second and the eighth atom positions of the linker, which correspond to the side chains of the P1' and the P3' residues, respectively, improved the affinity of the inhibitors significantly. Further study of the stereospecificity showed that L-Ala at the P1' residue and D-Ala at the P3' residue preferably improved the affinity of the inhibitors 20- and 25-fold, respectively. Molecular modeling calculations using a methyl probe were also carried out to identify favorable nonpolar interacting sites on the thrombin surface. Two sites were identified in the vicinity of the P1' and the P3' residues, supporting the validity of the methyl scan method. Thus, this study has improved our understanding of the interactions taking place in this groove. In particular, we have been able to show that some specific structural features, such as hydrophobic complementarity between the linker and the thrombin S' subsites, could be exploited and make these inhibitors trivalent.

Animals↗

Crystal structure of Kex1deltap, a prohormone-processing carboxypeptidase from Saccharomyces cerevisiae,.

Kex1p is a prohormone-processing serine carboxypeptidase found in Saccharomyces cerevisiae. In contrast to yeast serine carboxypeptidase (CPD-Y) and wheat serine carboxypeptidase II (CPDW-II), Kex1p displays a very narrow specificity for lysyl or arginyl residues at the C-terminus of the substrate. The structure of Kex1Deltap, an enzyme that lacks the acidic domain and membrane-spanning portion of Kex1p, has been solved by a combination of molecular replacement and multiple isomorphous replacement and refined to a resolution of 2.4 A. The S1' site of Kex1Deltap is sterically restricted compared to those from CPD-Y or CPDW-II; it also contains two acidic groups that are well positioned to interact with the basic group of a lysine or arginine side chain. The high specificity of Kex1p can therefore be explained by a combination of steric and electronic factors. The structure of the S1 site of Kex1Deltap is also well suited for binding of a lysine or arginine side chain, and the enzyme may therefore exhibit a preference for these residues at P1.

Amino Acid Sequence↗

Procedure to calculate the molecular envelope from a partial model.

Density-modification algorithms have gained, in recent years, a widespread use in the early stages of protein structure determination, especially in combination with the single isomorphous replacement, the multiple isomorphous replacement and the multiple-wavelength anomalous dispersion methods, where density modification usually leads to a significant improvement in the quality and interpretability of the initial electron-density map. The current computer programs which are used to perform this task combine several approaches, an important component of which is the solvent-flattening procedure. The latter procedure depends crucially on the correct determination of the molecular envelope. The solvent-flattening procedure has also been applied to the electron-density maps calculated from partial mod- els obtained from the molecular replacement method. In such case the envelope calculated in the standard way does not always encompass entirely the missing part. It has been found that the standard application of the density-modification method (as implemented by programs SQUASH and DM) to a map calculated from a molecular replacement model containing approximately 60% of the molecule, led to little improvement in the map interpretability. Here, it is shown that a significant improvement of the map can be achieved when a better envelope is used in the procedure. Various methods of calculating the molecular envelope have been evaluated, the effect of the shape of the envelope on the modified electron-density map has been investigated and an improved procedure to calculate the envelope from a partial molecular replacement model is proposed.

Journal Article↗

Restriction of intramolecular movements within the Cry1Aa toxin molecule of Bacillus thuringiensis through disulfide bond engineering.

Disulfide bridges were introduced into CrylAa, a Bacillus thuringiensis lepidopteran toxin, to stabilize different protein domains including domain I alpha-helical regions thought to be involved in membrane integration and permeation. Bridged mutants could not form functional ion channels in lipid bilayers in the oxidized state, but upon reduction with beta-mercaptoethanol, regained parental toxin channel activity. Our results show that unfolding of the protein around a hinge region linking domain I and II is a necessary step for pore formation. They also suggest that membrane insertion of the hydrophobic hairpin made of alpha-helices 4 and 5 in domain I plays a critical role in the formation of a functional pore.

Bacillus thuringiensis↗

The open conformation of a Pseudomonas lipase.

BACKGROUND: . The interfacial activation of lipases results primarily from conformational changes in the enzymes which expose the active site and provide a hydrophobic surface for interaction with the lipid substrate. Comparison of the crystallization conditions used and the structures observed for a variety of lipases suggests that the enzyme conformation is dependent on solution conditions. Pseudomonas cepacia lipase (PCL) was crystallized in conditions from which the open, active conformation of the enzyme was expected. Its three-dimensional structure was determined independently in three different laboratories and was compared with the previously reported closed conformations of the closely related lipases from Pseudomonas glumae (PGL) and Chromobacterium viscosum (CVL). These structures provide new insights into the function of this commercially important family of lipases. RESULTS: . The three independent structures of PCL superimpose with only small differences in the mainchain conformations. As expected, the observed conformation reveals a catalytic site exposed to the solvent. Superposition of PCL with the PGL and CVL structures indicates that the rearrangement from the closed to the open conformation involves three loops. The largest movement involves a 40 residue stretch, within which a helical segment moves to afford access to the catalytic site. A hydrophobic cleft that is presumed to be the lipid binding site is formed around the active site. CONCLUSIONS: . The interfacial activation of Pseudomonas lipases involves conformational rearrangements of surface loops and appears to conform to models of activation deduced from the structures of fungal and mammalian lipases. Factors controlling the conformational rearrangement are not understood, but a comparison of crystallization conditions and observed conformation suggests that the conformation of the protein is determined by the solution conditions, perhaps by the dielectric constant.

Amino Acid Sequence↗

High-level production of recombinant Geotrichum candidum lipases in yeast Pichia pastoris.

We describe the heterologous high-level expression of the two Geotrichum candidum lipase (GCL) isoenzymes from strain ATCC 34614 in the methylotrophic yeast Pichia pastoris. The lipase cDNAs were placed under the control of the methanol-inducible alcohol oxidase promoter. The lipases expressed in P. pastoris were fused to the alpha-factor secretion signal peptide of Saccharomyces cerevisiae and were secreted into the culture medium. Cultures of P. pastoris expressing lipase accumulated active recombinant enzyme in the supernatant to levels of approximately 60 mg/L virtually free from contaminating proteins. This yield exceeds that previously reported with S. cerevisiae by a factor of more than 60. Recombinant GCL I and GCL II had molecular masses of approximately 63 and approximately 66 kDa, respectively, as determined by SDS-PAGE. The result of endoglucosidase H digestion followed by Western blot analysis of the lipases suggested that the enzymes expressed in P. pastoris received N-linked high-mannose-type glycosylation to an extent, 6-8% (w/w), similar to that in G. candidum. The specific activities and substrate specificities of both recombinant lipases were determined and were found to agree with what has been reported for the enzymes isolated from the native source.

Cloning, Molecular↗