PubMed Health⌕ Search

Biomedical subjects

M Degrange

Publications and source records attributed to M Degrange.

42 records · Page 3Linked to original sources

Bonding of resin cements to a metal substrate: influence of pretreatment on the adherence energy.

The adherence of resin cements to restoration as well as tooth structure is of prime importance for the longevity of cemented restorations. It was the aim of the study to investigate the effect of an acid and a base primer on (i) surface polarity of a nonprecious alloy and on (ii) adherence energy of resin cements bonded to the alloy. The beams were pretreated with a 3% acetone solution of either maleic acid or N,N-diethanol-p-toluidine, and the solvent evaporated. The polarity was determined by means of measurements of contact angles. The adherence energy was measured by means of the wedge test, according to which 2 beams were glued together with the resin cement. A wedge was introduced between the joined beams to create a fissure, and on the basis of the length of the fissure, the adherence energy was calculated. It was found that the polar component of the surface free energy of the alloy increased as a consequence of the pretreatments. The results also showed that the pretreatments gave rise to an increase in adherence energy of 11-15 J/m2, equivalent to relative increases of 22-54%. The observed increases in adherence energy may be due to an increase in polar interactions at the interface between adhesive and substrate.

Adhesiveness↗

Correlation of topography to bond strength of etched ceramic.

PURPOSE: Bonding techniques are commonly used today to ensure the durability of porcelain laminate veneers and ceramic inlay-onlays, which are esthetically pleasing solutions to the problem of dental restoration. Acid etching and silanization of porcelain have been widely used to enhance the retention between bonding resins and ceramic restorations. The purpose of this study was to evaluate the effect of surface modifications with 10% hydrofluoric acid gel and a coupling agent (a dual component silane) on the bond strength of 2 dental feldspathic ceramics (GC and PVS) bonded with an unfilled resin (Super-Bond). MATERIALS AND METHODS: Eighty samples of GC and eighty samples of PVS were built for a mechanical study. Mechanical tests were conducted using a Lloyd T 6000 R tensile machine, which determined the bond strengths of the 2 ceramics after different surface treatments (etching or silanization). In the next part of the study, 10 surfaces of GC and 10 surfaces of PVS were studied with a scanning mechanical microscope to evaluate the action of hydrofluoric acid gel on the roughness of the 2 ceramics. RESULTS: Etching ceramic with hydrofluoric acid gel increased the developed surface of feldspathic ceramics, especially for PVS, but this treatment was not sufficient to obtain the highest shear bond strength. The highly positive influence of silanization was shown, particularly for GC ceramic bonded with an unfilled resin. CONCLUSION: Silane combined with the action of hydrofluoric acid gel is the most effective surface treatment for ceramic.

Analysis of Variance↗

Surface energy of etched ceramic.

PURPOSE: In a previous article the authors examined the evolution of the bond strengths of 2 dental feldspathic ceramics. The objective of the present study was to evaluate the effect of surface modifications with hydrofluoric acid gel (concentration 10%) on the surface energy of 2 dental feldspathic ceramics (GC and PVS). MATERIALS AND METHODS: For an energy characterization, 30 samples of GC and 30 samples of PVS were built. This study comprised the measurement of contact angles to determine the work of adhesion (WA) of the 2 ceramics. The evolution of the work of adhesion depended on the action of the hydrofluoric acid gel on the roughness of the surface of the 2 ceramics. RESULTS: In a polished state PVS presented a higher work of adhesion than GC. Etching the ceramics with hydrofluoric acid gel increased the work of adhesion, especially for GC, but this treatment was not sufficient to obtain a high work of adhesion. CONCLUSION: Etching with hydrofluoric acid gel was not sufficient to raise the work of adhesion of the 2 ceramics. Silanization is preferable to etching.

Acid Etching, Dental↗