Biomedical subjects

M E Casey

Publications and source records attributed to M E Casey.

5 recordsLinked to original sources

PubMed2000

Physical characteristics of the ECAT EXACT3D positron tomograph.

The 'EXACT3D' positron tomograph, which is now in routine clinical research use, was developed with the aim of achieving unprecedented sensitivity, high spatial and temporal resolution and simplicity of design using proven detector technology. It consists of six rings of standard detector blocks (CTI/Siemens EXACT HR+) with 4.39 mm x 4.05 mm x 30 mm elements, giving an axial field of view (FOV) of 23.4 cm. This extended FOV and the absence of interplane septa and retractable transmission rod sources has allowed greatly simplified gantry and detector cassette design. Operation in exclusive 3D mode requires an alternative to the conventional coincidence method for transmission scanning, and a single photon approach using a hydraulically driven 137Cs point source has been implemented. The tomograph has no other moving parts. A single time frame of data without any compression is very large (> 300 Mbyte) and two approaches are employed to overcome this difficulty: (a) adjacent sinograms can be summed automatically into different combinations and (b) listmode (event-by-event) acquisition has been instituted, which is both storage efficient (particularly for acquisition of sparse data sets) and maximizes temporal resolution. The high-speed I/O and computing hardware can maintain a sustained acquisition rate of about 4 million coincidence events per second. A disadvantage of the large axial FOV in 3D is the increased sensitivity to activity outside the coincidence FOV. However, this can be minimized by additional side shielding. The mean spatial resolution is 4.8 +/- 0.2 mm FWHM (transaxial, 1 cm off-axis) and 5.6 +/- 0.5 mm (axial, on-axis). Its absolute efficiency is 5.8% for a line source in air (just spanning the axial FOV) and 10% for a central point source (with thresholds of 350-650 keV). For a uniform 20 cm diameter cylinder, the efficiency is 69 kcps kBq(-1) ml(-1) (after subtraction of a scatter fraction of 42%). Sensitivity relative to the EXACT HR+ (with four rings of blocks) is 2.5 (3D) and 12 (2D) times respectively. The rate of random events in blood flow studies in the brain and body, using 15O-labelled water, can be controlled by limiting the administered dose and inserting additional side shielding.

Cesium Radioisotopes↗

PubMed1992

Physical performance of a positron tomograph for brain imaging with retractable septa.

Performance characteristics of a new design of positron tomograph with automatically retractable septa for brain imaging have been studied. The device, consisting of block BGO detectors (8 x 8 elements per block), has a ring diameter of 76 cm and an axial FOV of 106.5 mm. The in-plane resolution is on average 5.8 mm and 5.0 mm (FWHM) for stationary and wobble sampling, respectively, over the central 18 cm of the transaxial FOV. Its unique feature is the capability of data acquisition both in the 'conventional' 2D mode (with septa) or 3D mode (septa retracted) where coincidences between any of the 16 detector rings are acquired. When scattered events are subtracted, the efficiency for a 20 cm diameter uniform cylinder increases overall by a factor of 4.8 between 2D (septa extended) and 3D modes. For a 20 cm phantom the trues/singles ratio is higher for 3D than for 2D but for a given unscattered trues rate, the randoms rate in 3D is higher. At 380 keV the scatter fraction within a 20 cm cylinder is 10% (septa extended) and 36% (retracted). In spite of the increase in scatter when septa are retracted, the increased efficiency in the 3D mode of acquisition yields distinct advantages, particularly in the many studies where tracer concentration is low and consequently where dead time and random rates are less important.

Brain↗

PubMed1991

Performance standards in positron emission tomography.

A standard set of performance measurements is proposed for use with positron emission tomographs. This set of measurements has been developed jointly by the Computer and Instrumentation Council of the Society of Nuclear Medicine and the National Electrical Manufacturers Association. The measurements include tests of spatial resolution, scatter fraction, sensitivity, count rate losses and randoms, uniformity, scatter correction, attenuation correction, and count rate linearity correction.

Humans↗

PubMed1988

Site-directed metastasis: a model to study site variations in treatment response.

A model for the site-directed metastasis of a transplantable rat mammary carcinoma is described. The R3230AC tumor is a moderately well differentiated, phenotypically stable tumor which arose in a Fischer 344 rat and resembles human breast carcinoma in being hormonally sensitive, poorly immunogenic, and sensitive to radiation and chemotherapeutic agents. Metastases with this tumor can be consistently produced at specific sites (lung, liver, or subcutaneous) in a reproducible manner by the methods described in this paper. This model appears ideal for the evaluation of site-specific variation in response to treatment modalities.

Adenocarcinoma↗

PubMedDate not supplied

Quantitation in positron emission computed tomography: 7. A technique to reduce noise in accidental coincidence measurements and coincidence efficiency calibration.

A method of processing accidental coincidence events (AC) and detector efficiency (DE) calibration data, which reduces the statistical noise in these measurements, and, consequently, reduces the noise in positron emission tomographic images using the technique, is described. The technique uses the fact that, in these measurements with N detectors in coincidence with N other detectors, N2 values of ACs or DEs are measured. However, these values are composed of only 2N components, which are either singles rates or individual DEs. The full set of data is used to implicitly solve for these values and the individual ACs or DEs recalculated with an improvement in statistical error equivalent to an N2/(2N + 1) increase in accumulated events for the case of a uniform distribution. This result was verified experimentally.

Electricity↗