Biomedical subjects

M E Eugenio

Publications and source records attributed to M E Eugenio.

3 recordsLinked to original sources

PubMed2005

Soda-anthraquinone, kraft and organosolv pulping of holm oak trimmings.

The operating conditions for an organosolv (ethyleneglycol) and two alkaline (soda-anthraquinone and kraft) processes for obtaining cellulose pulp and paper from holm oak (Quercus ilex) wood trimmings were optimized. A range of variation for each process variable (viz. temperature, cooking time and soda or ethyleneglycol concentration) was established and a central composite experimental design involving three independent variables at three different variation levels was applied. The results obtained with the three cooking processes used were compared and those provided by the kraft process were found to be the best. Thus, the tensile index values it provided (5.9-16.3 N m/g) were 23.7% and 41.5% better than those obtained with the soda-AQ and ethyleneglycol processes, respectively. Also, the kraft process provided the best burst index, brightness and kappa number values. Based on the optimum working ranges, the temperature and cooking time were the variables resulting in the most and least marked changes, respectively, in pulp properties.

Anthraquinones↗

PubMed2003

Optimization of hydrogen peroxide in totally chlorine free bleaching of cellulose pulp from olive tree residues.

The influence of the operating conditions used in the bleaching of olive wood trimmings pulp (viz. hydrogen peroxide concentration and time) on the yield, kappa index and viscosity of the resulting pulp and on strength-related properties of paper sheets was studied to determine the optimal bleaching conditions of this pulp. Hydrogen peroxide bleached pulps at different sequences (oxygen, ozone, chlorine dioxide and alkaline extractions) were compared. Hydrogen peroxide bleaching proved to be suitable for this pulp. Considerable improvements in viscosity were obtained with respect to other bleaching sequences such as oxygen, ozone and chlorine dioxide. Hydrogen peroxide bleaching decreased the kappa index 51.3% less than ozone bleaching, 25.0% less than chlorine dioxide (D) and 6.3% less combined chlorine dioxide-alkaline extraction (DE). To obtain kappa indices 50.9% and 37.9% lower than the index achieved by hydrogen peroxide, oxygen (LaO(p)) and ozone (LaO(LaZ)R) sequences respectively were needed. Lower-medium levels of hydrogen peroxide concentrations (1-3%) and high reaction times (210 min) proved to be suitable for bleaching of pulp olive trimming residues. This approach could be used on this residue to produce adequately bleached pulp.

Cellulose↗

PubMed2003

Hydrothermal and pulp processing of Eucalyptus.

Hydrothermal processing of Eucalyptus wood was performed at operation temperature of 181 degrees C, processing time or 37.5 min and solid water ratio of 1/6 to ensure a maximum loss of xylan recuperation with minimum cellulose fibre degradation. Under those conditions, the loss of xylan was 22% less than that achieved with the conditions 196 degrees C, 50.6 min and 1/8 (solid/water). IN In addition, an experimental design was used to study the influence of process variables: temperature (145-175 degrees C), pulping time (40-120 min) and ethanol concentration (40-70% weight concentration), on the properties of pulps (yield, kappa number, viscosity, cellulose, xylan, lignin acetyl groups contents and brightness) and paper sheets (stretch index, burst index and tear index) obtained from the solid fraction after hydrothermal treatment of Eucalyptus globulus. Pulps with acceptably high physical and chemical properties can be obtained operating at 175 degrees C for 90 min with 55% ethanol concentration.

Cellulose↗